Pepperl Fuchs VIM82PL-S1V16-22E-I422V19

Vibration sensor. Vibration sensor with safety function both for the analog current output and for the 2 relay outputs with adjustable switching thresholds, Series: Performance Line, Measured variable: Vibration velocity, Safety Integrity Level (SIL): SIL 2, Output type: relay, Output type: relay, Output type: analog output, current

output of the vibration variable, Equipment protection level Gc: IECEx ULD 22.0031X, Equipment protection level Dc: IECEx ULD 22.0031X, Equipment protection level Gc: UL 22 ATEX 2870 X. Type: Vibration sensor. Measuring technology: MEMS. Series: Performance Line. Measured variable: Vibration velocity. Measuring range: . Vibration velocityv-rms0 ... 16 mm/s: v-rms. Vibration velocity: 0 ... 16 mm/s. Measurement accuracy: ± 0.1 mm/s (calibration point: 90% of the measuring range; 159.2 Hz) Complies with the tolerance requirements of DIN ISO 2954 for measuring range greater than 8 mm/s. Cross-sensitivity: < 5 % of the partial lateral acceleration, which acts exactly 90° to the measuring axis. Frequency range: 10 ... 1000 Hz. Averaging time: for v-rms: 2 s. Safety Integrity Level (SIL): SIL 2. Performance level (PL): PL d. Category: Cat. 2. MTTFd: 329 a. Mission Time (TM): 10 a. Diagnostic Coverage (DC): min. 90 %. Status indicator: 6 LEDs for operating states. Control elements: 4 rotary switches and 1 push button for programming. Fusing: external fuse is required: 3 A , semi-time-lag , 30 V DC. Operating voltage: 24 V DC + 7 % / - 10 %. Current consumption: max. 100 mA. Power consumption: 2.6 W. Time delay before availability: 15 s (initially self-test functions are executed before safe measured values are available at the output). Surge protection: up to 2 kV. Output type: relay. Switching function: Normally open (NO). Switching voltage: max. 30 V DC. Switching current: max. 1 A. Output type: relay. Switching function: Normally open (NO). Switching voltage: max. 30 V DC. Switching current: max. 1 A. Output type: analog output, current output of the vibration variable. Output current: 4 ... 20 mA. Load resistor: ≤ 500 Ω. Degree of protection: DIN EN 60529, IP66, IP67. Shock resistance: DIN EN 60068-2-27, 60 g, 6 ms. Vibration resistance: DIN EN 60068-2-6, 16.5 g, 10 ... 1000 Hz. Vibration evaluation: DIN ISO 10816/20816. Functional safety: DIN EN IEC 61508 , SIL 2 EN ISO 13849 , PL d. IECEx approval: . Equipment protection level GcIECEx ULD 22.0031XEquipment protection level DcIECEx ULD 22.0031X: . Equipment protection level Gc: IECEx ULD 22.0031X. Equipment protection level Dc: IECEx ULD 22.0031X. ATEX approval: . Equipment protection level GcUL 22 ATEX 2870 XEquipment protection level DcUL 22 ATEX 2870 X: . Equipment protection level Gc: UL 22 ATEX 2870 X. Equipment protection level Dc: UL 22 ATEX 2870 X. UL approval: . Ordinary LocationE468231 cULus Listed, Class III Power Source and limited energy , if UL marking is marked on the product. For use in NFPA 70 Applications only. adapters providing field wiring on requestHazardous LocationE106378Maximum permissible ambient temperaturemax. 60 °C (max. 140 °F)Control drawing116-0493: . Ordinary Location: E468231 cULus Listed, Class III Power Source and limited energy , if UL marking is marked on the product. For use in NFPA 70 Applications only. adapters providing field wiring on request. Hazardous Location: E106378. Maximum permissible ambient temperature: max. 60 °C (max. 140 °F). Control drawing: 116-0493. Ambient temperature: -40 ... 60 °C (-40 ... 140 °F). Measuring head temperature: -40 ... 85 °C (-40 ... 185 °F) directly at the mounting point. Storage temperature: -40 ... 60 °C (-40 ... 140 °F). Connection type: plug. Housing material: Stainless steel 1.4305 / AISI 303. Degree of protection: IP66 / IP67 only in connected state and correctly mounted housing cover. Connector: . ThreadingM12Number of pins8: . Threading: M12. Number of pins: 8. Mass: approx. 500 g. Dimensions: . Height46 mmWidth62 mmLength73.5 mm: . Height: 46 mm. Width: 62 mm. Length: 73.5 mm. Scope of delivery: 1 x allen head screw M8 x 20 1 x spring washer M8 1 x seal label. Use in the hazardous area: see instruction manuals Only use accessories specified by the manufacturer.

Specifications