.svg&w=240){kind=small}
B&R 7MM424.70-1 – 2003 motor module, four motor digital output stages, 24 VDC
Request a Quote
Quick facts
| Availability | Confirmed on request |
| Lifecycle | Active |
| Warranty | 12-month (new) · 3-month (used/refurbished) |
| Datasheet | Manufacturer datasheet ↗ |
Shipping & availability
When can 7MM424.70-1 be shipped?
7MM424.70-1 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up 7MM424.70-1 in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for 7MM424.70-1 and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for 7MM424.70-1, subject to availability and destination.
2003 motor module, four motor digital output stages, 24 VDC, 3 A to 50°C, max. inrush current 10 A (max. 50 ms), electronic overcurrent and overtemperature protection, order 1x terminal block TB710 separately!
Accessories
Specifications
General information
| C-UL-US listed | In preparation |
| B&R ID Code | $F3 |
| Module Type | B&R 2003 I/O module |
| Status Display | LEDs |
| Power Consumption – Internal | Max. 0.5 W |
| Power Consumption – 24 VDC Supply | Max. 6.1 W |
| Environmental Temperature during Operation | 0 - 50 °C |
Static Characteristics
| Type | 4 push-pull outputs |
| Electrical Isolation – Bridge - PLC | Yes |
| Electrical Isolation – Bridge - Bridge | No |
| Diagnostics Status – Voltage Monitoring | Motor supply voltage >18 V |
| Switching Voltage/Supply – Minimum | 18 VDC |
| Switching Voltage/Supply – Nominal | 24 VDC |
| Switching Voltage/Supply – Maximum | 30 VDC |
| Continuous Current per – Output | Max. 3 A |
| Continuous Current per – Module | Max. 8 A1) To increase the output current, bridges can be switched in parallel. |
| Peak Current | 5 A @ ≤200 ms |
| Starting Current | 10 A @ ≤50 ms |
| Switching On after Overload Cutoff | Automatic within seconds (depends on the module temperature) |
| Protection | Thermal cutoff Over-current cutoff |
Dynamic Characteristics
| Switching Delay – Log. 0 - Log. 1 | Max. 400 µs |
| Switching Delay – Log. 1 - Log. 0 | Max. 400 µs |
Mechanical Characteristics
| Dimensions | B&R 2003 single-width |
Downloads & documentation
Official documents from B&R, downloaded directly from the manufacturer.
Data sheets & manuals
| Datasheet 7MM424.70-1 | PDF · 673 KB · 1.0 (06/08/2004) - EN |
More B&R parts
Available on requestB&R 7IF321.7 – 2003 interface module, 1 RS485/RS422 interface
Available on requestB&R 7IF361.70-1 – 2003 interface module, 1 RS485 interface
Available on requestB&R 7IF371.70-1 – 2003 interface module, 1 CAN interface
Available on requestB&R 7ME770.5 – 2003 configuration memory for CAN bus controller
Available on requestB&R 7MM432.70-1 – 2003 motor bridge module, two motor (H) bridges
Available on requestB&R 7NC161.7 – 2003 encoder module, input frequency 100 kHz
Available on requestB&R 7TB710.9 – The single row 10-pin terminal block TB710 is used for…
Available on requestB&R 7TB710.91 – The single row 10-pin terminal block TB710 is used for…