
Switched-mode power supply; Classic; 1-phase; 12 VDC output voltage; 7 A output current; DC OK signal
Switched-mode power supply; Classic; 1-phase; 12 VDC output voltage; 15 A output current; TopBoost; DC OK contact
Features:
Switched-mode power supply
Natural convection cooling when horizontally mounted
Encapsulated for use in control cabinets
DC OK contact
Suitable for both parallel and series operation
Electrically isolated output voltage (SELV) per UL 60950-1; PELV per EN 60204
DNV approval
| Phases | 1 |
| Nominal input voltage U<sub>i nom</sub> | 1 x 100 … 240 VAC, 1 x AC 100 … 240 V |
| Input voltage range | 1 x 85 … 264 VAC; 120 … 300 VDC |
| Input voltage derating | -2.5 %/V (< 100 VAC) |
| Nominal mains frequency range | 44 … 66 Hz; 0 Hz |
| Input current I<sub>i</sub> | ≤ 0.93 A (240 VAC); ≤ 2.05 A (100 VAC) |
| Inrush current | ≤ 30 A |
| Power factor correction (PFC) | Active |
| Mains failure hold-up time | ≥ 28 ms (230 VAC); ≥ 28 ms (100 VAC) |
| Nominal output voltage U<sub>o nom</sub> | 12 VDC (SELV) |
| Output voltage range | 11.5 … 15 VDC (adjustable) |
| Default setting | DC 12 V |
| Nominal output current I<sub>o nom</sub> | 15 A (12 VDC) |
| Nominal output power | 180 W |
| Deviation | ≤ 1 % |
| Residual ripple | ≤ 35 mV (peak-to-peak) |
| Current limitation | 1.1 x Io nom (typ.) |
| Overload behavior | Constant current |
| TopBoost | See instruction leaflet |
| Signaling | 1 x DC OK LED (green), 1 x DC OK contact (make contact; max. 30 VAC/DC; 1 A) |
| Operation status indicator | Green LED (Uo) |
| Power loss P<sub>l</sub> | ≤ 4.4 W; ≤ 21.8 W (230 VAC; nominal load) |
| Power loss (max.) P<sub>l (max.)</sub> | 24.7 W (100 VAC / 12 VDC; 15 A) |
| Efficiency (typ.) | 90 % |
| Internal fuse | T 6.3 A / 250 VAC |
| Pre-fuse (required) | An external DC fuse is required for the DC input voltage. |
| Backup fuse (recommended) | Circuit breaker: 10 A, 16 A; Tripping characteristic: B or C |
| Isolation voltage (sec.-PE) | 0.7 kVDC |
| Protection class | I |
| Protection type | IP20; per EN 60529 |
| Resistance to reverse feed | ≤ 25 VDC |
| Overvoltage category | II |
| Pollution degree | 2 |
| Transient suppression (primary) | Varistor |
| Overvoltage protection; secondary | Internal protective circuit, ≤ 20 VDC (in the event of a fault) |
| Short-circuit-protected | Yes |
| Open-circuit-proof | Yes |
| Parallel operation | Yes |
| Series operation | Yes |
| MTBF | > 500,000 h (per IEC 61709) |
| Connection type | Input/output/signaling |
| Connection technology | CAGE CLAMP® |
| WAGO connector | WAGO 721 Series |
| Solid conductor | 0.08 … 2.5 mm² / 28 … 12 AWG |
| Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 12 AWG |
| Strip length | 8 … 9 mm / 0.31 … 0.35 inches |
| Width | 55 mm / 2.165 inches |
| Height | 127 mm / 5 inches |
| Depth from upper-edge of DIN-rail | 172 mm / 6.772 inches |
| Mounting type | DIN-35 rail |
| Weight | 930 g |
| Ambient temperature (operation) | -25 … +70 °C (Device starts at -40 °C (type-tested)) |
| Ambient temperature (storage) | -25 … +85 °C |
| Relative humidity | 5 … 96 % (no condensation permissible) |
| Derating | −5 %/K (> 60 °C, 196 … 264 VAC); −2.5 %/K (> 50 °C, 85 … 195 VAC) |
| Climatic category | 3K3 (per EN 60721) |
| Conformity marking | CE |
| Standards/specifications | EN 61010-1, EN 61010-2-201, EN 61204-3, UL 60950-1, UL 508, DNV, SEMI F47 |
| Product Group | 6 (INTERFACE ELECTRONIC) |
| PU (SPU) | 1 pcs |
| Packaging type | box |
| Country of origin | DE |
| GTIN | 4055143060509 |
| Customs tariff number | 85044083900 |
| UNSPSC | 39121004 |
| eCl@ss 10.0 | 27-04-07-01 |
| eCl@ss 9.0 | 27-04-07-01 |
| ETIM 9.0 | EC002540 |
| ETIM 10.0 | EC002540 |
| ECCN | NO US CLASSIFICATION |
| RoHS Compliance Status | Compliant,No Exemption |
787-1631 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Yes — mention it when you request a quote for 787-1631 and we'll include express shipping options in our reply.
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for 787-1631, subject to availability and destination.

Switched-mode power supply; Classic; 1-phase; 12 VDC output voltage; 7 A output current; DC OK signal

Switched-mode power supply; Classic; 1-phase; 24 VDC output voltage; 5 A output current; TopBoost; DC OK contact

Switched-mode power supply; Classic; 1-phase; 48 VDC output voltage; 2 A output current; DC OK signal

Switched-mode power supply; Classic; 2-phase; 24 VDC output voltage; 5 A output current; TopBoost; DC OK contact

Switched-mode power supply; Classic; 1-phase; 24 VDC output voltage; 10 A output current; TopBoost; DC OK contact

Switched-mode power supply; Classic; 1-phase; 24 VDC output voltage; 10 A output current; TopBoost; DC OK contact

Switched-mode power supply; Classic; 1-phase; 48 VDC output voltage; 5 A output current; TopBoost; DC OK contact

Switched-mode power supply; Classic; 1-phase; 24 VDC output voltage; 20 A output current; TopBoost; DC OK contact