Sick FTS-H100F04B
Request a Quote
Quick facts
| Availability | Confirmed on request |
| Category | T-Easic FTS |
| Lifecycle | active |
| Warranty | 12-month (new) · 3-month (used/refurbished) |
Shipping & availability
When can FTS-H100F04B be shipped?
FTS-H100F04B is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up FTS-H100F04B in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for FTS-H100F04B and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for FTS-H100F04B, subject to availability and destination.
Flow sensors | T-Easic FTS | FTS-H100F04B | Wetted parts: Stainless steel 1.4404 (Ra ≤ 0,8 µm) | Process connection: Without process connection (adapter needed for installation) | Output signal: 2 push-pull digital outputs (Q1 configurable for IO-Link; Q2 configurable as analog output (4 … 20 mA) / pulse output / digital input) for flow and temperature | Process temperature: –40 °C ... +150 °C | Process pressure: –1 bar ... 100 bar, 40 bar (with SICK T-connector DN15, DN25), 25 bar (with SICK T-connector DN40), 20 bar (with SICK T-connector DN50) | Probe length: 100 mm
Specifications
Features
| Measurement principle | Calorimetric measurement process |
| Medium | Water and oil-based liquids |
| Pipe diameters | â¥Â 25 mm 1) |
| Process temperature | â40 °C ... +150 °C 3) |
| Process pressure | â1 bar ... 100 bar, 40 bar (with SICK T-connector DN15, DN25), 25 bar (with SICK T-connector DN40), 20 bar (with SICK T-connector DN50) 4) |
| Communication interface | IO-Link, IO-Link V1.1, COM3 (230.4Â kbit/s) |
| Temperature measurement | â |
Performance
| Inlet zone | 5Â x DN |
| Output zone | 3Â x DN |
| Repeatability | < 1 cm/s 1) |
| Resolution | 0.01Â m/s Speed; 0.1Â L/min volume; 0.1% relative (via IO-Link) |
| Temperature drift | <Â 0.5Â cm / (s*K)Â 1) |
| Response time | < 2.5 s 2) |
| Measurement accuracy (temperature) | ± 1 °C |
| Resolution (Temperature) | < 0.1 °C |
| Response time (temperature) | < 5 s 3) |
| Operating mode | Relative speed (%), Volume flow and total volume, Relative teach (%) |
Electronics
| Supply voltage | 9Â VÂ DCÂ ... 30Â VÂ DCÂ 1) |
| Power consumption | <Â 2Â W at 24Â VÂ DC (without load on the outputs)<Â 8Â W At maximum load |
| Initialization time | â¤Â 5 sâ¤Â 10 s (IO-Link) |
| Protection class | III |
| Connection type | M12 round connector x 1, 4-pin |
| Output signal | 2 push-pull digital outputs (Q1 configurable for IO-Link; Q2 configurable as analog output (4 ⦠20 mA) / pulse output / digital input) for flow and temperature |
| Output current | <Â 100Â mAÂ 2) |
| Output load | 4Â mAÂ ... 20Â mA, max. 350Â Ohm, if Uv <Â 12Â V, 500Â Ohm if Uv>Â 12Â V |
| Lower signal level | 3.5Â mAÂ ... 3.8Â mA |
| Upper signal level | 20.5Â mAÂ ... 21.5Â mA |
| Inaccuracy | QA Pin2: <Â 0.5% full-range (20Â mA) |
| Inductive load | 1Â H |
| Capacitive load | 100Â nF (2.5Â nF, IO-Link mode) |
| EMC | ENÂ 61326-1, ENÂ 61326-2-3 |
| Digital input limit | HIGH voltage dependent on UvLOW voltage <Â 4.0Â V |
| MTTF | >Â 200Â years |
Mechanics
| Process connection | Without process connection (adapter needed for installation) |
| Wetted parts | Stainless steel 1.4404 (Ra ⤠0,8 µm) |
| Housing material | Stainless steel 1.4305Â / 303 |
| Enclosure rating | IP67 / IP69Â 1) |
| Probe diameter | 8Â mm |
| Probe length | 100Â mm |
| Minimum immersion length | 12Â mm |
| Distance to pipe wall | 10Â mm |
Ambient data
| Ambient operating temperature | â40 °C ... +70 °C 1) |
| Ambient temperature, storage | â40 °C ... +80 °C |
Certificates
| EU declaration of conformity | â |
| UK declaration of conformity | â |
| ACMA declaration of conformity | â |
| Moroccan declaration of conformity | â |
| China RoHS | â |
| cULus certificate | â |
| IO-Link certificate | â |
| Food contact material manufacturer declaration | â |
| Information according to Art. 3 of Data Act (Regulation EU 2023/2854) | â |
Classifications
| ECLASS 5.0 | 27273101 |
| ECLASS 5.1.4 | 27273101 |
| ECLASS 6.0 | 27273101 |
| ECLASS 6.2 | 27273101 |
| ECLASS 7.0 | 27273101 |
| ECLASS 8.0 | 27273101 |
| ECLASS 8.1 | 27273101 |
| ECLASS 9.0 | 27273101 |
| ECLASS 10.0 | 27273101 |
| ECLASS 11.0 | 27273101 |
| ETIM 5.0 | EC002580 |
| ETIM 6.0 | EC002580 |
| ETIM 7.0 | EC002580 |
| ETIM 8.0 | EC002580 |
| UNSPSC 16.0901 | 41112501 |
