.svg&w=240){kind=small}
B&R 7EX290.50-1 – 2003 X2X Link bus controller, 24 VDC, 3.2 W power supply
Request a Quote
Quick facts
| Availability | Confirmed on request |
| Lifecycle | Active |
| Warranty | 12-month (new) · 3-month (used/refurbished) |
| Datasheet | Manufacturer datasheet ↗ |
Shipping & availability
When can 7EX290.50-1 be shipped?
7EX290.50-1 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up 7EX290.50-1 in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for 7EX290.50-1 and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for 7EX290.50-1, subject to availability and destination.
2003 X2X Link bus controller, 24 VDC, 3.2 W power supply, 1 X2X Link interface, electrically isolated, order 1x terminal block TB712 separately!
Accessories
Required accessories (order separately)
| 7TB712.91 | Terminal blocks — The single-row, 12-pin 7TB712 terminal block is used to connect to I/O modules. Removal is simplified by two ejection levers on the termina… |
| 7TB712.9 | Terminal blocks — The single-row, 12-pin 7TB712 terminal block is used to connect to I/O modules. Removal is simplified by two ejection levers on the termina… |
Specifications
General Information
| Bus Controller | X2X Link Slave |
| I/O Bus Interface | 9-pin DSUB socket |
Interfaces
| Type | X2X Link Slave |
| Design | 12-pin multipoint connector |
| Input Voltage | 24 VDC |
| Voltage Range | 18 VDC to 30 VDC |
| Power Input | 5.0 W |
| Output power for I/O modules and screw-in modules | 3.2 W |
| Voltage Monitoring | The power supply is only enabled starting with an input voltage of approx. +15 V. Therefore, the DC OK status LED is not necessary. |
General Information
| Status Display | Module status |
| Diagnostics – Module Status | Yes, with status LED |
| Certification | CE, C-UL-US (in development), GOST-R |
| Possible module addresses for analog modules | 1 - 4, for description see section "Module Slot Rules" |
| Electrical Isolation – I/O - X2X Link | Yes |
Mechanical Characteristics
| Module Width | 20 mm |
| Installation | The controller is screwed onto the module rack instead of the left side plate |
| Protection | IP20 |
| Operating Temperature – Horizontal Installation | 0 °C to +60 °C |
| Operating Temperature – Vertical Installation | 0 °C to +50 °C |
| Storage Temperature | -25 °C to +70 °C |
| Humidity | 5 to 95% (non-condensing) |
| Note | 1 x TB712 terminal block sold separately Bus Controller EX290 |
Downloads & documentation
Official documents from B&R, downloaded directly from the manufacturer.
Data sheets & manuals
| Datasheet 7EX290.50-1 | PDF · 243 KB · 1.0 (03/07/2005) - EN |
More B&R parts
Available on requestB&R 7EC020.61-2 – Embedded controller, ARNC0, x86 100 MHz Intel compatible
Available on requestB&R 7EC021.60-1 – Embedded controller, x86 100 MHz Intel compatible
Available on requestB&R 7EC021.61-2 – RS232 interface (IF1) for programming and configuring using…
Available on requestB&R 7EX270.50-1 – 2003 CAN bus controller, 24 VDC, 4 W power supply
Available on requestB&R 7EX470.50-1 – 2003 CAN bus controller, 24 VDC, 14.5 W power supply
Available on requestB&R 7EX477.50-1 – 2003 remote I/O bus controller 24 VDC
Available on requestB&R 7EX477.50-2 – 2003 remote I/O bus controller 24 VDC