STANDARD LINEAR BUSHING KBMT-30-DD-NR
Demander un devis
En bref
| Disponibilité | Confirmation sur demande |
| Catégorie | Linear bushings |
| Cycle de vie | active |
| Garantie | 12 mois (neuf) · 3 mois (occasion/reconditionné) |
Livraison & disponibilité
Quand R065023030 peut-il être expédié ?
R065023030 est approvisionné sur demande — demandez un devis et nous confirmerons la disponibilité exacte et le délai de livraison pour cette pièce précise.
Puis-je récupérer R065023030 en personne ?
Un retrait dans notre entrepôt de Groningue, Pays-Bas, est parfois possible — contactez-nous avant de commander pour vérifier la disponibilité et convenir d'un horaire de retrait.
La livraison express est-elle disponible ?
Oui — mentionnez-le lors de votre demande de devis pour R065023030 et nous inclurons les options de livraison express dans notre réponse.
Notre usine est à l'arrêt et nous en avons besoin de toute urgence — pouvez-vous aider ?
En cas de panne critique, contactez-nous directement au +31 (0)50-7110348 ou à sales@partnerplc.com — nous étudierons une livraison le jour même par coursier ou taxi dédié pour R065023030, selon la disponibilité et la destination.
standard linear bushing<br>Standard (metal)<br>Tandem<br>Shaft diameter d = 30<br>With two seals<br>Version: Rust-resistant Rugged all-metal design with steel ball retainer for harsh environments and heavy contamination Many pockets acting as lubricant reservoirs for extended lubrication intervals or lubrication for life For use in woodworking, foundries, cement plants Stainless steel for the medical, chemistry and food industries Integrated wiper seals Pockets collect any dirt that may have worked its way in to prevent the linear bushing from jamming. Hardened and machined outer sleeve made of stainless steel comparable to 1.4125 Ball retainer made of stainless steel comparable to 1.4301 Balls made of stainless steel comparable to 1.4125 Retaining rings for ball retainer made of stainless steel comparable to 1.4006
Caractéristiques
Specifications
| Shaft diameter d [mm] | 30.0 |
| Version | Corrosion-resistant |
| Format of linear bushings | T - Tandem |
| Series | Standard (metal) |
| Type | Linear bushing |
| Seal | 2 integrated wiper seals |
| Lubrication | Not lubricated |
| Maximum dynamic load capacity Cmax [N] | 2150.0 |
| Maximum acceleration rate amax [m/s²] | 100.0 |
| Maximum permissible linear speed vmax [m/s] | 2.5 |
| Length of linear bushing [mm] | 123.0 |
| Outer diameter D [mm] | 47.0 |
| Permissible ambient temperature (min. ... max.) | -10 °C ... +80 °C |
| Note: permissible ambient temperature (min. ... max.) | Only unsealed linear bushings with steel ball retainers may be used at higher temperatures. Make allowance for reductions in load capacity. |
| Weight [kg] | 0.65 |
| Static longitudinal moment load capacity ML0 [Nm] | 82 |
| Footnote maximum dynamic load capacity Cmax | The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26. |
| Footnote minimum dynamic load capacity Cmin | The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26. |
| Footnote shaft radial clearance h6 | Determined from working bore diameter and shaft tolerance statistics. Recommended housing bore tolerance: H6 or H7 |
| Footnote friction force FR | Frictional drags generated by linear bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. |
| Breakaway force [N] | 18 |
| Dimension C [mm] | 123 |
| Dimension C1 [mm] | 104.2 |
| Tolerance C1 [mm] | -0.4 |
| Dimension C2 [mm] | 1.85 |
| Dimension D [mm] | 47 |
| Dimension D1 [mm] | 44.5 |
Plus de pièces Bosch Rexroth
OccasionRexroth PDP01 02 328104 Used
OccasionRexroth HCS03.1E-W0150-A-05-NNBV Used
OccasionRexroth HCS01.1E-W0009 -A-02-B-ET-EC- NN-L4-NN-FW Used