STANDARD LINEAR BUSHING KBMT-30-DD-NR
견적 요청
요약 정보
| 재고 상태 | 요청 시 확인 |
| 카테고리 | Linear bushings |
| 라이프사이클 | active |
| 보증 | 12개월(신품) · 3개월(중고/재제조) |
배송 & 재고
R065023030은(는) 언제 배송될 수 있나요?
R065023030은(는) 요청 시 소싱됩니다 — 견적을 요청해 주시면 이 특정 제품의 정확한 재고 및 배송 일정을 확인해 드립니다.
R065023030을(를) 직접 픽업할 수 있나요?
네덜란드 흐로닝언 창고에서 직접 픽업이 가능할 수 있습니다 — 주문 전에 연락하셔서 재고와 픽업 시간을 확인해 주세요.
특급 배송이 가능한가요?
네 — R065023030에 대한 견적을 요청하실 때 말씀해 주시면 답변에 특급 배송 옵션을 포함해 드립니다.
공장 가동이 중단되어 긴급히 필요합니다 — 도와주실 수 있나요?
긴급 고장 상황이시라면 +31 (0)50-7110348 또는 sales@partnerplc.com으로 직접 연락해 주세요 — 재고 및 배송지에 따라 R065023030에 대한 당일 택배 또는 전용 긴급 배송을 검토해 드립니다.
standard linear bushing<br>Standard (metal)<br>Tandem<br>Shaft diameter d = 30<br>With two seals<br>Version: Rust-resistant Rugged all-metal design with steel ball retainer for harsh environments and heavy contamination Many pockets acting as lubricant reservoirs for extended lubrication intervals or lubrication for life For use in woodworking, foundries, cement plants Stainless steel for the medical, chemistry and food industries Integrated wiper seals Pockets collect any dirt that may have worked its way in to prevent the linear bushing from jamming. Hardened and machined outer sleeve made of stainless steel comparable to 1.4125 Ball retainer made of stainless steel comparable to 1.4301 Balls made of stainless steel comparable to 1.4125 Retaining rings for ball retainer made of stainless steel comparable to 1.4006
사양
Specifications
| Shaft diameter d [mm] | 30.0 |
| Version | Corrosion-resistant |
| Format of linear bushings | T - Tandem |
| Series | Standard (metal) |
| Type | Linear bushing |
| Seal | 2 integrated wiper seals |
| Lubrication | Not lubricated |
| Maximum dynamic load capacity Cmax [N] | 2150.0 |
| Maximum acceleration rate amax [m/s²] | 100.0 |
| Maximum permissible linear speed vmax [m/s] | 2.5 |
| Length of linear bushing [mm] | 123.0 |
| Outer diameter D [mm] | 47.0 |
| Permissible ambient temperature (min. ... max.) | -10 °C ... +80 °C |
| Note: permissible ambient temperature (min. ... max.) | Only unsealed linear bushings with steel ball retainers may be used at higher temperatures. Make allowance for reductions in load capacity. |
| Weight [kg] | 0.65 |
| Static longitudinal moment load capacity ML0 [Nm] | 82 |
| Footnote maximum dynamic load capacity Cmax | The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26. |
| Footnote minimum dynamic load capacity Cmin | The dynamic load capacities are based on a total travel of 100,000 m. When based on 50,000 m, the C values in the table are to be multiplied by 1.26. |
| Footnote shaft radial clearance h6 | Determined from working bore diameter and shaft tolerance statistics. Recommended housing bore tolerance: H6 or H7 |
| Footnote friction force FR | Frictional drags generated by linear bushings with integrated wiper seals on two sides when not under radial load. The frictional drags depend on speed and lubrication. |
| Breakaway force [N] | 18 |
| Dimension C [mm] | 123 |
| Dimension C1 [mm] | 104.2 |
| Tolerance C1 [mm] | -0.4 |
| Dimension C2 [mm] | 1.85 |
| Dimension D [mm] | 47 |
| Dimension D1 [mm] | 44.5 |
Bosch Rexroth의 다른 부품
중고Rexroth HCS03.1E-W0150-A-05-NNBV Used
중고Rexroth HCS01.1E-W0009 -A-02-B-ET-EC- NN-L4-NN-FW Used