DIGITAL INPUT MODULE XI190202
Demander un devis
En bref
| Disponibilité | Confirmation sur demande |
| Catégorie | XI1 Digital Inputs |
| Cycle de vie | active |
| Garantie | 12 mois (neuf) · 3 mois (occasion/reconditionné) |
Livraison & disponibilité
Quand R911421642 peut-il être expédié ?
R911421642 est approvisionné sur demande — demandez un devis et nous confirmerons la disponibilité exacte et le délai de livraison pour cette pièce précise.
Puis-je récupérer R911421642 en personne ?
Un retrait dans notre entrepôt de Groningue, Pays-Bas, est parfois possible — contactez-nous avant de commander pour vérifier la disponibilité et convenir d'un horaire de retrait.
La livraison express est-elle disponible ?
Oui — mentionnez-le lors de votre demande de devis pour R911421642 et nous inclurons les options de livraison express dans notre réponse.
Notre usine est à l'arrêt et nous en avons besoin de toute urgence — pouvez-vous aider ?
En cas de panne critique, contactez-nous directement au +31 (0)50-7110348 ou à sales@partnerplc.com — nous étudierons une livraison le jour même par coursier ou taxi dédié pour R911421642, selon la disponibilité et la destination.
The digital input module XI190202 is used to detect binary 24 V control signals in a ctrlX I/O station. The module is designed with 2 channels in 2-wire technology. The signal state is shown at the channel LED on the removable peripheral connector. The signals are sampled at an adjustable sampling rate (oversampling factor n) relative to the bus cycle time. The module provides n-bit process data for each bus cycle, which is transmitted in the subsequent bus cycle. The input reading is synchronized with other EtherCAT participants with high precision using a distributed clock. To suppress interference signals, the inputs are filtered with a 1µs filter.<br><br>The logic and peripheral supply as well as the EtherCAT-based module communication are routed through the module.
Caractéristiques
Specifications
| Connection type | Push-in |
| Connectivity technology | 2-wire technique |
| Width [mm] | 12 |
| Height [mm] | 105 |
| Depth [mm] | 99 |
| International protection code | IP20 |
| Protection class | III |
| EMC resistance | EN 61000-6-2 and EN 61000-6-4 |
| Maximum power dissipation in the module [W] | 1.34 |
| Input filter | 0.001 ms |
| Fuse protection (UOUT24 V) | Internal with a protective fuse |
| Channel LEDs | Per channel |
| Post-assembly position | Vertical, on a horizontal support rail |
| Electrical isolation | 1200 V DC UP to UL, 707 V DC UP/UL to FE, both tested for 60 s;(not evaluated by UL) |
| Max. current up per terminal point [A] | 1 |
| Max. net current Up module [A] | 1 |
| Input current [mA] | 2.4 |
| Signal voltage "0" [V] | -3-5 |
| Signal voltage "1" [V] | 11-30 |
| Nominal voltage (UL/UP) | DC 24 V (19.2 V to 30 V, including tolerance and residual ripple) PELV/SELV (safety extra-low voltage) |
| Overvoltage category | 2 |
| Nominal input voltage [V DC] | 24 |
| Conductor cross-section | AWG: 24 ... 16; Flexible: 0.2-1.5 mm²; rigid: 0.2-1.5 mm² |
| Permissible air humidity (storage) [%] | 10-95 |
| Permissible air humidity (transport) [%] | 10-95 |
| Ambient temperature during operation | 2,000 m to 3,000 m: -25 °C to +50 °C; Up to 2,000 m: -25 °C to +55 °C |
| Maximum operating altitude [m] | 5000 |
| Contamination level | 2, no condensation |
| Weight [kg] | 0.11 |
Plus de pièces Bosch Rexroth
OccasionRexroth PDP01 02 328104 Used
OccasionRexroth HCS03.1E-W0150-A-05-NNBV Used
OccasionRexroth HCS01.1E-W0009 -A-02-B-ET-EC- NN-L4-NN-FW Used