ANALOG INPUT MODULE XI351002
Solicitar presupuesto
Datos rápidos
| Disponibilidad | Confirmación bajo consulta |
| Categoría | XI3 Analog Inputs |
| Ciclo de vida | active |
| Garantía | 12 meses (nuevo) · 3 meses (usado/reacondicionado) |
Envío y disponibilidad
¿Cuándo se puede enviar R911406109?
R911406109 se abastece bajo pedido — solicite un presupuesto y confirmaremos la disponibilidad exacta y el plazo de entrega para esta unidad concreta.
¿Puedo recoger R911406109 en persona?
Es posible recoger el pedido en nuestro almacén de Groningen, Países Bajos — contáctenos antes de realizar el pedido para confirmar disponibilidad y acordar un horario de recogida.
¿Está disponible el envío exprés?
Sí — menciónelo al solicitar un presupuesto para R911406109 e incluiremos las opciones de envío exprés en nuestra respuesta.
Nuestra planta está parada y lo necesitamos urgentemente — ¿pueden ayudar?
Ante una avería crítica, contáctenos directamente al +31 (0)50-7110348 o a sales@partnerplc.com — estudiaremos un envío urgente el mismo día o un transporte dedicado para R911406109, según disponibilidad y destino.
The temperature measurement module XI351002 reads in temperatures from resistive temperature sensors on two independent channels. Common sensor types such as PT100, PT1000, NI120 and various others are supported. It also provides a resistance measurement in the range between 10 an 3276.7 ohms.<br><br>Error states are shown at the status LED of the module and routed to the control via the local bus.<br><br>The logic and peripheral voltage supply as well as the EtherCAT-based module communication are routed through the module.
Especificaciones
Specifications
| Connection type | Push-in |
| Connectivity technology | 2-wire, 3-wire technique, shielded, twisted |
| Number of channels | 2 |
| Max. output current per channel [A] | 0.5 |
| Width [mm] | 12 |
| Height [mm] | 105 |
| Depth [mm] | 99 |
| International protection code | IP20 |
| Protection class | III |
| Backplane-Bus | Standard-EtherCAT über LVDS |
| Resolution A/D | 16 Bit |
| EMC resistance | EN 61000-6-2 and EN 61000-6-4 |
| Bit width, input data in the process data image (including fill bits) | 10 bytes (can be set channel-granularly) |
| A/D conversion time | 160 ms for 1 channel; 320 ms for 2 channels |
| Maximum power dissipation in the module [W] | 1.2 |
| Post-assembly position | Vertical, on a horizontal support rail |
| Electrical isolation | 1200 V DC UP to UL, 707 V DC UP/UL to FE, both tested for 60 s;(not evaluated by UL) |
| Supported sensor types | PT100, PT200, PT500, PT1000 (characteristic curve PT385 for all platinum sensors), NI100, NI120, NI500, NI1000 (characteristic curve TK6180 for all nickel sensors), NI1000 (characteristic curve TK5000), KTY81-110, KTY 81-210, KTY 84, resistance measurement |
| Current requirement UL | 37 mA |
| Current requirement Up | 12 mA |
| Net current module outputs [A] | 0.001 |
| Nominal voltage (UL/UP) | DC 24 V (19.2 V to 30 V, including tolerance and residual ripple) PELV/SELV (safety extra-low voltage) |
| Overvoltage category | 2 |
| Signal type | Single-ended with ground reference |
| Conductor cross-section | AWG: 24 ... 16; Flexible: 0.2-1.5 mm²; rigid: 0.2-1.5 mm² |
| Overload protection | 9.9 V |
| Permissible air humidity (storage) [%] | 10-95 |
| Permissible air humidity (transport) [%] | 10-95 |
| Ambient temperature (storage and transport) [°C] | -40-70 |
| Ambient temperature during operation | 2,000 m to 3,000 m: -25 °C to +40 °C; Up to 2000 m: -25°C to +45°C |
| Maximum operating altitude [m] | 3000 |
| Contamination level | 2, no condensation |
| Weight [kg] | 0.12 |
Más piezas Bosch Rexroth
UsadoRexroth HCS03.1E-W0150-A-05-NNBV Used
UsadoRexroth HCS01.1E-W0009 -A-02-B-ET-EC- NN-L4-NN-FW Used