ANALOG INPUT MODULE XI351002
見積もりを依頼する
基本情報
| 在庫状況 | お問い合わせにより確認 |
| カテゴリー | XI3 Analog Inputs |
| ライフサイクル | active |
| 保証 | 12か月（新品）・3か月（中古・整備済み） |
配送・在庫状況
R911406109はいつ発送できますか？
R911406109はお問い合わせにより調達いたします — 見積もりを依頼いただければ、この個体の正確な在庫状況と配送スケジュールをご案内いたします。
R911406109を直接引き取ることはできますか？
オランダ・フローニンゲンの当社倉庫での引き取りが可能な場合があります — ご注文前にお問い合わせいただき、在庫状況と引き取り日時をご確認ください。
エクスプレス配送は利用できますか？
はい — R911406109の見積もり依頼時にその旨をお知らせいただければ、返信にエクスプレス配送のオプションを含めてご案内いたします。
工場が停止しており緊急で必要です — 対応可能ですか？
重大な故障の場合は、+31 (0)50-7110348またはsales@partnerplc.comまで直接ご連絡ください — R911406109について、在庫状況と配送先に応じて即日クーリエまたは専用タクシー・ホットショット配送を検討いたします。
The temperature measurement module XI351002 reads in temperatures from resistive temperature sensors on two independent channels. Common sensor types such as PT100, PT1000, NI120 and various others are supported. It also provides a resistance measurement in the range between 10 an 3276.7 ohms.<br><br>Error states are shown at the status LED of the module and routed to the control via the local bus.<br><br>The logic and peripheral voltage supply as well as the EtherCAT-based module communication are routed through the module.
仕様
Specifications
| Connection type | Push-in |
| Connectivity technology | 2-wire, 3-wire technique, shielded, twisted |
| Number of channels | 2 |
| Max. output current per channel [A] | 0.5 |
| Width [mm] | 12 |
| Height [mm] | 105 |
| Depth [mm] | 99 |
| International protection code | IP20 |
| Protection class | III |
| Backplane-Bus | Standard-EtherCAT über LVDS |
| Resolution A/D | 16 Bit |
| EMC resistance | EN 61000-6-2 and EN 61000-6-4 |
| Bit width, input data in the process data image (including fill bits) | 10 bytes (can be set channel-granularly) |
| A/D conversion time | 160 ms for 1 channel; 320 ms for 2 channels |
| Maximum power dissipation in the module [W] | 1.2 |
| Post-assembly position | Vertical, on a horizontal support rail |
| Electrical isolation | 1200 V DC UP to UL, 707 V DC UP/UL to FE, both tested for 60 s;(not evaluated by UL) |
| Supported sensor types | PT100, PT200, PT500, PT1000 (characteristic curve PT385 for all platinum sensors), NI100, NI120, NI500, NI1000 (characteristic curve TK6180 for all nickel sensors), NI1000 (characteristic curve TK5000), KTY81-110, KTY 81-210, KTY 84, resistance measurement |
| Current requirement UL | 37 mA |
| Current requirement Up | 12 mA |
| Net current module outputs [A] | 0.001 |
| Nominal voltage (UL/UP) | DC 24 V (19.2 V to 30 V, including tolerance and residual ripple) PELV/SELV (safety extra-low voltage) |
| Overvoltage category | 2 |
| Signal type | Single-ended with ground reference |
| Conductor cross-section | AWG: 24 ... 16; Flexible: 0.2-1.5 mm²; rigid: 0.2-1.5 mm² |
| Overload protection | 9.9 V |
| Permissible air humidity (storage) [%] | 10-95 |
| Permissible air humidity (transport) [%] | 10-95 |
| Ambient temperature (storage and transport) [°C] | -40-70 |
| Ambient temperature during operation | 2,000 m to 3,000 m: -25 °C to +40 °C; Up to 2000 m: -25°C to +45°C |
| Maximum operating altitude [m] | 3000 |
| Contamination level | 2, no condensation |
| Weight [kg] | 0.12 |
Bosch Rexrothの他の部品
中古Rexroth HCS03.1E-W0150-A-05-NNBV Used
中古Rexroth HCS01.1E-W0009 -A-02-B-ET-EC- NN-L4-NN-FW Used