ANALOG INPUT MODULE XI351002
طلب عرض سعر
معلومات سريعة
| التوفر | يُؤكَّد عند الطلب |
| الفئة | XI3 Analog Inputs |
| دورة الحياة | active |
| الضمان | 12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد) |
الشحن والتوفر
متى يمكن شحن R911406109؟
R911406109 يُورَّد عند الطلب — اطلب عرض سعر وسنؤكد التوفر الدقيق ومدة الشحن لهذه الوحدة تحديدًا.
هل يمكنني استلام R911406109 شخصيًا؟
قد يكون الاستلام الشخصي من مستودعنا في غرونينغن، هولندا ممكنًا — تواصل معنا قبل الطلب للتحقق من التوفر وترتيب موعد الاستلام.
هل التوصيل السريع متاح؟
نعم — اذكر ذلك عند طلب عرض سعر لـR911406109 وسنُدرج خيارات التوصيل السريع في ردنا.
مصنعنا متوقف عن العمل ونحتاج هذا بشكل عاجل — هل يمكنكم المساعدة؟
في حالة عطل حرج، تواصل معنا مباشرة على +31 (0)50-7110348 أو sales@partnerplc.com — يمكننا النظر في توصيل بواسطة ساعٍ في نفس اليوم أو توصيل مخصص عاجل لـR911406109، حسب التوفر والوجهة.
The temperature measurement module XI351002 reads in temperatures from resistive temperature sensors on two independent channels. Common sensor types such as PT100, PT1000, NI120 and various others are supported. It also provides a resistance measurement in the range between 10 an 3276.7 ohms.<br><br>Error states are shown at the status LED of the module and routed to the control via the local bus.<br><br>The logic and peripheral voltage supply as well as the EtherCAT-based module communication are routed through the module.
المواصفات
Specifications
| Connection type | Push-in |
| Connectivity technology | 2-wire, 3-wire technique, shielded, twisted |
| Number of channels | 2 |
| Max. output current per channel [A] | 0.5 |
| Width [mm] | 12 |
| Height [mm] | 105 |
| Depth [mm] | 99 |
| International protection code | IP20 |
| Protection class | III |
| Backplane-Bus | Standard-EtherCAT über LVDS |
| Resolution A/D | 16 Bit |
| EMC resistance | EN 61000-6-2 and EN 61000-6-4 |
| Bit width, input data in the process data image (including fill bits) | 10 bytes (can be set channel-granularly) |
| A/D conversion time | 160 ms for 1 channel; 320 ms for 2 channels |
| Maximum power dissipation in the module [W] | 1.2 |
| Post-assembly position | Vertical, on a horizontal support rail |
| Electrical isolation | 1200 V DC UP to UL, 707 V DC UP/UL to FE, both tested for 60 s;(not evaluated by UL) |
| Supported sensor types | PT100, PT200, PT500, PT1000 (characteristic curve PT385 for all platinum sensors), NI100, NI120, NI500, NI1000 (characteristic curve TK6180 for all nickel sensors), NI1000 (characteristic curve TK5000), KTY81-110, KTY 81-210, KTY 84, resistance measurement |
| Current requirement UL | 37 mA |
| Current requirement Up | 12 mA |
| Net current module outputs [A] | 0.001 |
| Nominal voltage (UL/UP) | DC 24 V (19.2 V to 30 V, including tolerance and residual ripple) PELV/SELV (safety extra-low voltage) |
| Overvoltage category | 2 |
| Signal type | Single-ended with ground reference |
| Conductor cross-section | AWG: 24 ... 16; Flexible: 0.2-1.5 mm²; rigid: 0.2-1.5 mm² |
| Overload protection | 9.9 V |
| Permissible air humidity (storage) [%] | 10-95 |
| Permissible air humidity (transport) [%] | 10-95 |
| Ambient temperature (storage and transport) [°C] | -40-70 |
| Ambient temperature during operation | 2,000 m to 3,000 m: -25 °C to +40 °C; Up to 2000 m: -25°C to +45°C |
| Maximum operating altitude [m] | 3000 |
| Contamination level | 2, no condensation |
| Weight [kg] | 0.12 |
المزيد من قطع Bosch Rexroth
مستعملRexroth PDP01 02 328104 Used
مستعملRexroth HCS03.1E-W0150-A-05-NNBV Used
مستعملRexroth HCS01.1E-W0009 -A-02-B-ET-EC- NN-L4-NN-FW Used