Pepperl Fuchs NJ4-30GM-N-200
Request a Quote
Quick facts
| Availability | Confirmed on request |
| Category | Inductive Sensors |
| Lifecycle | active |
| Warranty | 12-month (new) · 3-month (used/refurbished) |
Shipping & availability
When can NJ4-30GM-N-200 be shipped?
NJ4-30GM-N-200 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up NJ4-30GM-N-200 in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for NJ4-30GM-N-200 and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for NJ4-30GM-N-200, subject to availability and destination.
Inductive sensor. Extended temperature range, Suitable for 2:1 technology, Switching function: Normally closed (NC), Output type: NAMUR, Installation: flush, Output type: 2-wire, Thread mold: M30, Construction type: Cylindrical, thread, Series: Cylindrical type, Suitable for 2:1 technology, Type of voltage: DC, Equipment protection level Ga: IECEx PTB 11.0037X, Equipment protection level Gb: IECEx PTB 11.0037X, Equipment protection level Da: IECEx PTB 11.0037X, Equipment protection level Mb: IECEx PTB 11.0037X. Switching function: Normally closed (NC). Output type: NAMUR. Rated operating distance: 4 mm. Installation: flush. Assured operating distance: 0 ... 3.04 mm. Reduction factor rAl: 0.15. Reduction factor rCu: 0.05. Reduction factor r304: 0.55. Output type: 2-wire. Nominal voltage: 8.2 V (Ri approx. 1 kΩ). Switching frequency: 0 ... 1000 Hz. Hysteresis: ≤ 20 % at 200°C. Suitable for 2:1 technology: yes , Reverse polarity protection diode not required. Current consumption: . Measuring plate not detectedmin. 3 mAMeasuring plate detected≤ 1 mA: . Measuring plate not detected: min. 3 mA. Measuring plate detected: ≤ 1 mA. Standard conformity: . NAMUREN 60947-5-6:2000 IEC 60947-5-6:1999StandardsEN IEC 60947-5-2: . NAMUR: EN 60947-5-6:2000 IEC 60947-5-6:1999. Standards: EN IEC 60947-5-2. IECEx approval: . Equipment protection level GaIECEx PTB 11.0037XEquipment protection level GbIECEx PTB 11.0037XEquipment protection level DaIECEx PTB 11.0037XEquipment protection level MbIECEx PTB 11.0037X: . Equipment protection level Ga: IECEx PTB 11.0037X. Equipment protection level Gb: IECEx PTB 11.0037X. Equipment protection level Da: IECEx PTB 11.0037X. Equipment protection level Mb: IECEx PTB 11.0037X. ATEX approval: . Equipment protection level GaPTB 00 ATEX 2048 XEquipment protection level GbPTB 00 ATEX 2048 XEquipment protection level DaPTB 00 ATEX 2048 X: . Equipment protection level Ga: PTB 00 ATEX 2048 X. Equipment protection level Gb: PTB 00 ATEX 2048 X. Equipment protection level Da: PTB 00 ATEX 2048 X. UL approval: cULus Listed Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 8.2 V DC. Ordinary LocationE87056Hazardous LocationE501628Control drawing116-0452: . Ordinary Location: E87056. Hazardous Location: E501628. Control drawing: 116-0452. CCC approval: . Hazardous Location2020322315002257: . Hazardous Location: 2020322315002257. CML approval: on request. ANZEx: 18.3018X. Ambient temperature: 0 ... 200 °C (32 ... 392 °F). Connection type: cable. Housing material: Stainless steel 1.4305 / AISI 303. Sensing face: PPS. Degree of protection: IP65. Cable: . Cable diameter4 mm ± 0.2 mmBending radius> 7.5 x cable diameterMaterialFEPCore cross section0.34 mm2LengthL5 m: . Cable diameter: 4 mm ± 0.2 mm. Bending radius: > 7.5 x cable diameter. Material: FEP. Core cross section: 0.34 mm2. Length: 5 m. Dimensions: . Length75 mmDiameter30 mm: . Length: 75 mm. Diameter: 30 mm. Note: amplifier -25°C...70°C 2 m PTFE cable between amplifier and oscillator. Use in the hazardous area: see instruction manuals
Specifications
General specifications
| Switching function | Normally closed (NC) |
| Output type | NAMUR |
| Rated operating distance | 4 mm sn |
| Installation | flush |
| Assured operating distance | 0 ... 3.04 mm sa |
| Reduction factor rAl | 0.15 |
| Reduction factor rCu | 0.05 |
| Reduction factor r304 | 0.55 |
| Output type | 2-wire |
Nominal ratings
| Nominal voltage | 8.2 V (Ri approx. 1 kΩ) Uo |
| Switching frequency | 0 ... 1000 Hz f |
| Hysteresis | ≤ 20 % at 200°C H |
| Suitable for 2:1 technology | yes , Reverse polarity protection diode not required |
| Current consumption | |
| Measuring plate not detectedmin. 3 mAMeasuring plate detected≤ 1 mA | Measuring plate not detected |
| Measuring plate not detected | min. 3 mA |
| Measuring plate detected | ≤ 1 mA |
Compliance with standards and directives
| Standard conformity | |
| NAMUREN 60947-5-6:2000 IEC 60947-5-6:1999StandardsEN IEC 60947-5-2 | NAMUR |
| NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 |
| Standards | EN IEC 60947-5-2 |
Approvals and certificates
| IECEx approval | |
| Equipment protection level GaIECEx PTB 11.0037XEquipment protection level GbIECEx PTB 11.0037XEquipment protection level DaIECEx PTB 11.0037XEquipment protection level MbIECEx PTB 11.0037X | Equipment protection level Ga |
| Equipment protection level Ga | IECEx PTB 11.0037X |
| Equipment protection level Gb | IECEx PTB 11.0037X |
| Equipment protection level Da | IECEx PTB 11.0037X |
| Equipment protection level Mb | IECEx PTB 11.0037X |
| ATEX approval | |
| Equipment protection level GaPTB 00 ATEX 2048 XEquipment protection level GbPTB 00 ATEX 2048 XEquipment protection level DaPTB 00 ATEX 2048 X | Equipment protection level Ga |
| Equipment protection level Ga | PTB 00 ATEX 2048 X |
| Equipment protection level Gb | PTB 00 ATEX 2048 X |
| Equipment protection level Da | PTB 00 ATEX 2048 X |
| UL approval | cULus Listed Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 8.2 V DC |
| Ordinary LocationE87056Hazardous LocationE501628Control drawing116-0452 | Ordinary Location |
| Ordinary Location | E87056 |
| Hazardous Location | E501628 |
| Control drawing | 116-0452 |
| CCC approval | |
| Hazardous Location2020322315002257 | Hazardous Location |
| Hazardous Location | 2020322315002257 |
| CML approval | on request |
| ANZEx | 18.3018X |
Ambient conditions
| Ambient temperature | 0 ... 200 °C (32 ... 392 °F) |
Mechanical specifications
| Connection type | cable |
| Housing material | Stainless steel 1.4305 / AISI 303 |
| Sensing face | PPS |
| Degree of protection | IP65 |
| Cable | |
| Cable diameter4 mm ± 0.2 mmBending radius> 7.5 x cable diameterMaterialFEPCore cross section0.34 mm2LengthL5 m | Cable diameter |
| Cable diameter | 4 mm ± 0.2 mm |
| Bending radius | > 7.5 x cable diameter |
| Material | FEP |
| Core cross section | 0.34 mm2 |
| Length | 5 m L |
| Dimensions | |
| Length75 mmDiameter30 mm | Length |
| Length | 75 mm |
| Diameter | 30 mm |
| Note | amplifier -25°C...70°C 2 m PTFE cable between amplifier and oscillator |
General information
| Use in the hazardous area | see instruction manuals |
More Pepperl Fuchs parts
Available on requestPepperl Fuchs NJ4-12GM50-WS
Available on requestPepperl Fuchs NJ4-12GM50-WS-10M
Available on requestPepperl Fuchs NJ4-12GM50-WS-20M
Available on requestPepperl Fuchs NJ4-12GM50-WS-V12
Available on requestPepperl Fuchs NJ4-30GM-N-200-10M
Available on requestPepperl Fuchs NJ4-F-N
Available on requestPepperl Fuchs NJ40-FP-SN-B1-P1-Y024207
Available on requestPepperl Fuchs NJ40-FP-SN-P1