Pepperl Fuchs ICA-16IO-G20-IO-P16 – I/O hub IO-Link. G20 IO-Link I/O Hub for 16 freely…

I/O hub IO-Link. G20 IO-Link I/O Hub for 16 freely configurable digital inputs/outputs. UL File Number: E223772. MTBF: 149 a. LED green: : IO1..8 / IO9..16 bank indication. LED yellow/red: IO1 ... IO16: inputs/outputs status, IO-Link status. Operating voltage: 18 ... 30 V DC, PELV Current limitation of the supply max. 4 A. No-load supply current: ≤ 25 mA. Operating current: max. 4 A. Interface type: IO-Link. IO-Link revision: 1.1. Device profile: Identification and Diagnosis - I&D Firmware update. Process data: Inputs 3 Byte - Input signals 16 Bit - diagnosis signals 5 Bit Outputs 2 Byte - Output signals 16 Bit. Vendor ID: 1 (0x0001). Device ID: 985345 (0x0F0901). Data transfer rate: COM3 (230.4 kbits/s). Min. cycle time: 1 ms. SIO mode support: no. Compatible master port type: Class A. Number/Type: 16 Inputs for 3-wire sensors (PNP), DC (IO1 ... IO16). Supply: from IO-Link. Current loading capacity: 200 mA , overload and short-circuit protected. Input current: ≤ 5 mA (limited internally). Switching point: Type 3 according to IEC 61131-2. Number/Type: 16 electronic outputs, PNP (IO1 … IO16), overload-proof and short-circuit-proof. Supply: from IO-Link. Voltage: ≥ (UB - 1.5 V). Current: 200 mA per output. Electromagnetic compatibility: . Directive 2014/30/EUEN 61326-1:2013 EN 55011:2016: . Directive 2014/30/EU: EN 61326-1:2013 EN 55011:2016. Degree of protection: EN 60529:2000. Input: EN 61131-2:2007. Communication interface: IEC 61131-9:2013 / IO-Link V1.1.3. Emitted interference: EN 61000-6-4:2007. Noise immunity: EN 61000-6-2:2005, EN 61326-1:2006. UL approval: UL 61010-1, UL 61010-2-201 Load specification DC General Use / DC Pilot Duty Degree of protection not tested by UL; tested by Pepperl+Fuchs SE. Ambient temperature: -30 ... 70 °C (-22 ... 158 °F). Storage temperature: -30 ... 85 °C (-22 ... 185 °F). Relative humidity: 85 % non-condensing. Climatic conditions: For indoor use only. Altitude: ≤ 5000 m above MSL. Shock and impact resistance: 30 g, 11 ms in 6 spatial directions, 3 shocks 10 g, 16 ms in 6 spatial directions, 1000 shocks. Vibration resistance: 0.35 mm / 5 g 5 ... 500 Hz. Pollution degree: 2. Degree of protection: IP54 according to EN 60529. Connection: IO-Link: M12 round plug connector in accordance with EN 61076-2-101, LM type (4-pin, connector contacts, screw-locking, A-coded)Female connector: LF type or similarIO: M8 round plug connector in accordance with EN 61076-2-104, LF type (4-pin, bushing contacts, screw-locking, A-coded)Mating connector: LM type or similar. Mass: 310 g. Dimensions: . Height27.5 mmWidth131.5 mmLength54 mm: . Height: 27.5 mm. Width: 131.5 mm. Length: 54 mm. Mounting: 2 clips with ∅ 8 mm drill hole The module must be secured to a solid, continuous surface using the two lugs. Cable length: 1 m (IO-Link)0.2 m (IO1/2, IO15/16), 0.3 m (IO3/4, IO13/14)0.4 m (IO5/6, IO11/12); 0.5 m (IO7/8, IO9/10)max. 10 m

Specifications