BALL RUNNER BLOCK ALUMINUM KWD-020-SNS-C0-H-1
Poproś o wycenę
Najważniejsze informacje
| Dostępność | Potwierdzenie na zapytanie |
| Kategoria | High-precision ball runner block BSHP |
| Cykl życia | active |
| Gwarancja | 12 miesięcy (nowe) · 3 miesiące (używane/odnowione) |
Wysyłka i dostępność
Kiedy R163289323 może zostać wysłany?
R163289323 jest sprowadzany na zamówienie — poproś o wycenę, a potwierdzimy dokładną dostępność i czas realizacji dla tej konkretnej sztuki.
Czy mogę odebrać R163289323 osobiście?
Odbiór osobisty w naszym magazynie w Groningen w Holandii może być możliwy — skontaktuj się z nami przed złożeniem zamówienia, aby potwierdzić dostępność i ustalić termin odbioru.
Czy dostępna jest dostawa ekspresowa?
Tak — wspomnij o tym w zapytaniu ofertowym dotyczącym R163289323, a w odpowiedzi podamy opcje dostawy ekspresowej.
Nasz zakład stoi i pilnie tego potrzebujemy — czy możecie pomóc?
W przypadku krytycznej awarii skontaktuj się z nami bezpośrednio pod numerem +31 (0)50-7110348 lub e-mailem sales@partnerplc.com — sprawdzimy możliwość kuriera tego samego dnia lub dedykowanego transportu dla R163289323, w zależności od dostępności i miejsca docelowego.
The aluminum ball runner block is highly precise and has a reduced weight compared to the steel version. Additionally, it is characterized by the following product features:<br>Size 20<br>Format SNS: Width = slimline, length = normal, height = standard<br>Runner block body made of aluminum<br>Preload class C0: Preload-free<br>Accuracy class H: High<br>With ball chain<br>With initial lubrication and preservation<br>Roller bearing grease Dynalub 510<br>Without attachment element, left (front reference edge)<br>Without attachment element, right (front reference edge)<br>Straight lube connection loosely attached.<br>Runner block body in standard version<br>Overall length of the runner block = 75.0 mm<br>Interchangeability: The runner block and the guide rails can be combined with each other with every accuracy. Area of application: For lightweight design – for compensating low tolerances with connected structures Optimized entry-zone geometry and high number of balls minimize variation in elastic deflection Extra-compact lightweight design 60% less gravity due to aluminum compared to the ball runner blocks made of steel Maximum precision Patented entry zone increases the travel accuracy up to a factor of six Can be used on all SNS ball guide rails Lube connection with metal thread on all sides Ball runner block pre-lubricated at the factory Attachments on the ball runner block can be mounted from above Limitless interchangeability as all ball guide rail systems can be combined at will with all ball runner block versions within each accuracy class. Excellent dynamic characteristics Minimum quantity lubrication with integrated reservoir for oil lubrication Predrilled holes on the Ball Runner Block for pinned fitting Enables greater parallelism and height offsets of mounting bases Quiet, smooth running thanks to optimally designed ball and ball chain return and guideway Accuracy classes H and N are combinable with all rails in each accuracy class Long-term lubrication is possible over several years Ball chain for low noise level and best travel behavior
Specyfikacja
Specifications
| Version | Ball rail system |
| Nominal size [mm] | 20 |
| Format | SNS - slimline, normal, standard height |
| Model | High-precision ball runner block |
| Material (profiled rail systems) | Aluminum |
| Preload class | C0 - Without preload (clearance) |
| Accuracy class | H - Highly accurate |
| Seal | LS - Low-friction seal |
| Ball chain | With ball chain |
| Self-aligning for compensation of misalignments | Without self-alignment |
| Width of runner block [mm] | 44.0 |
| Length of runner block [mm] | 75.0 |
| Height of runner block [mm] | 25.35 |
| Height runner block with guide rail [mm] | 30.0 |
| Lubrication | Pre-lubricated, preserved |
| Maximum dynamic load Fmax [N] | 7200 |
| Maximum acceleration rate amax [m/s²] | 500.0 |
| Note: Max. acceleration amax | If F<sub>comb</sub>◡> 2.8 • F<sub>pr</sub> : a<sub>max</sub> = 50 m/s<sup>2</sup> |
| Maximum permissible linear speed vmax [m/s] | 5.0 |
| Maximum permissible torsional moment Mt max [Nm] | 92 |
| Maximum permissible longitudinal load moment ML max [Nm] | 50 |
| Note: seal | No preferred variants/combinations (partially longer delivery times) |
| Permissible ambient temperature (min. ... max.) | 0 °C ... +80 °C |
| Note: permissible ambient temperature (min. ... max.) | 100°C admissible for a short time. For operation at negative temperatures, please consult us. |
| Friction coefficient μ | 0.002 ... 0.003 |
| Note: friction coefficient μ | Without friction of seal |
| Weight [kg] | 0.2 |
| Dynamic load capacity C50 [N] | 28000.0 |
| Note: dynamic load capacity C50 | Dynamic load capacities and load moments are based on a travel of 50,000 m according to DIN ISO 14728-1. |
| Dynamic load capacity C100 [N] | 22200.0 |
| Note: dynamic load capacity C100 | Dynamic load capacities and load moments are based on a travel of 100,000 m according to DIN ISO 14728-1. |
| Dynamic torsional moment load capacity Mt50 [Nm] | 350.0 |
| Note: Dynamic torsional moment load capacity Mt50 | Dynamic load capacities and load moments are based on a travel of 50,000 m according to DIN ISO 14728-1. |
| Dynamic torsional moment load capacity Mt100 [Nm] | 280.0 |
| Note: Dynamic torsional moment load capacity Mt100 | Dynamic load capacities and load moments are based on a travel of 100,000 m according to DIN ISO 14728-1. |
| Dynamic longitudinal moment load capacity ML50 [Nm] | 240.0 |
| Note: Dynamic longitudinal moment load capacity ML50 | Dynamic load capacities and load moments are based on a travel of 50,000 m according to DIN ISO 14728-1. |
| Dynamic longitudinal moment load capacity ML100 [Nm] | 190.0 |
| Note: Dynamic longitudinal moment load capacity ML100 | Dynamic load capacities and load moments are based on a travel of 100,000 m according to DIN ISO 14728-1. |
| Pitch T guide rail [mm] | 60 |
| Dimension A (profiled rail systems) [mm] | 44 |
| Dimension A1 (profiled rail systems) [mm] | 22 |
| Dimension A2 (profiled rail systems) [mm] | 20 |
| Dimension A3 (profiled rail systems) [mm] | 12 |
| Dimension B (profiled rail systems) [mm] | 75 |
| Dimension B tolerance (profiled rail systems) [mm] | +0.5 |
| Dimension B1 [mm] | 49.6 |
| Dimension E1 [mm] | 32 |
| Dimension E2 (profiled rail systems) [mm] | 36 |
| Dimension E8 (profiled rail systems) [mm] | 32.5 |
| Dimension E9 (profiled rail systems) [mm] | 7.3 |
| Dimension H [mm] | 30.0 |
| Dimension H1 (profiled rail systems) [mm] | 25.35 |
| Dimension H2 with cover strip (profiled rail systems) [mm] | 20.75 |
| Dimension H2 without cover strip (profiled rail systems) [mm] | 20.55 |
| Dimension K1 (profiled rail systems) [mm] | 13.8 |
| Dimension K2 (profiled rail systems) [mm] | 13.8 |
| Dimension K3 (profiled rail systems) [mm] | 3.35 |
| Dimension K4 (profiled rail systems) [mm] | 3.35 |
| Dimension N3 (profiled rail systems) [mm] | 7.5 |
| Dimension N6 (profiled rail systems) [mm] | 13.2 |
| Dimension N6 tolerance (profiled rail systems) [mm] | ±0.5 |
| Dimension S11 (profiled rail systems) [mm] | 4.7 |
| Dimension S2 (profiled rail systems) | M5 |
| Dimension S5 (profiled rail system) [mm] | 6 |
| Dimension S9 | M3x5 mm |
| Dimension S9 thread diameter (profiled rail systems) | M3 |
| Dimension S9 lead [mm] | 5 |
| Dimension T1 min [mm] | 13 |
| Dimension V1 [mm] | 6 |
Więcej części Bosch Rexroth
UżywanyRexroth PDP01 02 328104 Used
UżywanyRexroth HCS03.1E-W0150-A-05-NNBV Used
UżywanyRexroth HCS01.1E-W0009 -A-02-B-ET-EC- NN-L4-NN-FW Used


