متاح عند الطلب

BALL RUNNER BLOCK ALUMINUM KWD-020-SNS-C0-H-1

رقم القطعة (MPN): R163289323 · العلامة التجارية: Bosch Rexroth
السعر عند الطلب
طلب عرض سعر

يرد شخص حقيقي، عادةً خلال يوم عمل واحد — راجع سياسة الخصوصية.

ضمان 12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد)
إرجاع خلال 30 يومًا، دون رسوم إعادة تخزين على القطع غير المستخدمة
يُشحن عبر

معلومات سريعة

التوفريُؤكَّد عند الطلب
الفئةHigh-precision ball runner block BSHP
دورة الحياةactive
الضمان12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد)

الشحن والتوفر

متى يمكن شحن R163289323؟

R163289323 يُورَّد عند الطلب — اطلب عرض سعر وسنؤكد التوفر الدقيق ومدة الشحن لهذه الوحدة تحديدًا.

هل يمكنني استلام R163289323 شخصيًا؟

قد يكون الاستلام الشخصي من مستودعنا في غرونينغن، هولندا ممكنًا — تواصل معنا قبل الطلب للتحقق من التوفر وترتيب موعد الاستلام.

هل التوصيل السريع متاح؟

نعم — اذكر ذلك عند طلب عرض سعر لـR163289323 وسنُدرج خيارات التوصيل السريع في ردنا.

مصنعنا متوقف عن العمل ونحتاج هذا بشكل عاجل — هل يمكنكم المساعدة؟

في حالة عطل حرج، تواصل معنا مباشرة على +31 (0)50-7110348 أو sales@partnerplc.com — يمكننا النظر في توصيل بواسطة ساعٍ في نفس اليوم أو توصيل مخصص عاجل لـR163289323، حسب التوفر والوجهة.

The aluminum ball runner block is highly precise and has a reduced weight compared to the steel version. Additionally, it is characterized by the following product features:<br>Size 20<br>Format SNS: Width = slimline, length = normal, height = standard<br>Runner block body made of aluminum<br>Preload class C0: Preload-free<br>Accuracy class H: High<br>With ball chain<br>With initial lubrication and preservation<br>Roller bearing grease Dynalub 510<br>Without attachment element, left (front reference edge)<br>Without attachment element, right (front reference edge)<br>Straight lube connection loosely attached.<br>Runner block body in standard version<br>Overall length of the runner block = 75.0 mm<br>Interchangeability: The runner block and the guide rails can be combined with each other with every accuracy. Area of application: For lightweight design – for compensating low tolerances with connected structures Optimized entry-zone geometry and high number of balls minimize variation in elastic deflection Extra-compact lightweight design 60% less gravity due to aluminum compared to the ball runner blocks made of steel Maximum precision Patented entry zone increases the travel accuracy up to a factor of six Can be used on all SNS ball guide rails Lube connection with metal thread on all sides Ball runner block pre-lubricated at the factory Attachments on the ball runner block can be mounted from above Limitless interchangeability as all ball guide rail systems can be combined at will with all ball runner block versions within each accuracy class. Excellent dynamic characteristics Minimum quantity lubrication with integrated reservoir for oil lubrication Predrilled holes on the Ball Runner Block for pinned fitting Enables greater parallelism and height offsets of mounting bases Quiet, smooth running thanks to optimally designed ball and ball chain return and guideway Accuracy classes H and N are combinable with all rails in each accuracy class Long-term lubrication is possible over several years Ball chain for low noise level and best travel behavior

المواصفات

Specifications

VersionBall rail system
Nominal size [mm]20
FormatSNS - slimline, normal, standard height
ModelHigh-precision ball runner block
Material (profiled rail systems)Aluminum
Preload classC0 - Without preload (clearance)
Accuracy classH - Highly accurate
SealLS - Low-friction seal
Ball chainWith ball chain
Self-aligning for compensation of misalignmentsWithout self-alignment
Width of runner block [mm]44.0
Length of runner block [mm]75.0
Height of runner block [mm]25.35
Height runner block with guide rail [mm]30.0
LubricationPre-lubricated, preserved
Maximum dynamic load Fmax [N]7200
Maximum acceleration rate amax [m/s²]500.0
Note: Max. acceleration amaxIf F<sub>comb</sub>◡> 2.8 • F<sub>pr</sub> : a<sub>max</sub> = 50 m/s<sup>2</sup>
Maximum permissible linear speed vmax [m/s]5.0
Maximum permissible torsional moment Mt max [Nm]92
Maximum permissible longitudinal load moment ML max [Nm]50
Note: sealNo preferred variants/combinations (partially longer delivery times)
Permissible ambient temperature (min. ... max.)​0 °C ... +80 °C
Note: permissible ambient temperature (min. ... max.)100°C admissible for a short time. For operation at negative temperatures, please consult us.
Friction coefficient μ0.002 ... 0.003
Note: friction coefficient μWithout friction of seal
Weight [kg]0.2
Dynamic load capacity C50 [N]28000.0
Note: dynamic load capacity C50Dynamic load capacities and load moments are based on a travel of 50,000 m according to DIN ISO 14728-1.
Dynamic load capacity C100 [N]22200.0
Note: dynamic load capacity C100Dynamic load capacities and load moments are based on a travel of 100,000 m according to DIN ISO 14728-1.
Dynamic torsional moment load capacity Mt50 [Nm]350.0
Note: Dynamic torsional moment load capacity Mt50Dynamic load capacities and load moments are based on a travel of 50,000 m according to DIN ISO 14728-1.
Dynamic torsional moment load capacity Mt100 [Nm]280.0
Note: Dynamic torsional moment load capacity Mt100Dynamic load capacities and load moments are based on a travel of 100,000 m according to DIN ISO 14728-1.
Dynamic longitudinal moment load capacity ML50 [Nm]240.0
Note: Dynamic longitudinal moment load capacity ML50Dynamic load capacities and load moments are based on a travel of 50,000 m according to DIN ISO 14728-1.
Dynamic longitudinal moment load capacity ML100 [Nm]190.0
Note: Dynamic longitudinal moment load capacity ML100Dynamic load capacities and load moments are based on a travel of 100,000 m according to DIN ISO 14728-1.
Pitch T guide rail [mm]60
Dimension A (profiled rail systems) [mm]44
Dimension A1 (profiled rail systems) [mm]22
Dimension A2 (profiled rail systems) [mm]20
Dimension A3 (profiled rail systems) [mm]12
Dimension B (profiled rail systems) [mm]75
Dimension B tolerance (profiled rail systems) [mm]+0.5
Dimension B1 [mm]49.6
Dimension E1 [mm]32
Dimension E2 (profiled rail systems) [mm]36
Dimension E8 (profiled rail systems) [mm]32.5
Dimension E9 (profiled rail systems) [mm]7.3
Dimension H [mm]30.0
Dimension H1 (profiled rail systems) [mm]25.35
Dimension H2 with cover strip (profiled rail systems) [mm]20.75
Dimension H2 without cover strip (profiled rail systems) [mm]20.55
Dimension K1 (profiled rail systems) [mm]13.8
Dimension K2 (profiled rail systems) [mm]13.8
Dimension K3 (profiled rail systems) [mm]3.35
Dimension K4 (profiled rail systems) [mm]3.35
Dimension N3 (profiled rail systems) [mm]7.5
Dimension N6 (profiled rail systems) [mm]13.2
Dimension N6 tolerance (profiled rail systems) [mm]±0.5
Dimension S11 (profiled rail systems) [mm]4.7
Dimension S2 (profiled rail systems)M5
Dimension S5 (profiled rail system) [mm]6
Dimension S9M3x5 mm
Dimension S9 thread diameter (profiled rail systems)M3
Dimension S9 lead [mm]5
Dimension T1 min [mm]13
Dimension V1 [mm]6
ضمان 12 شهرًاعلى جميع المخزون الجديد
ضمان 3 أشهرعلى القطع المستعملة والمجددة
إرجاع خلال 30 يومًادون رسوم إعادة تخزين على القطع غير المستخدمة
شحن عالميتوصيل سريع وقابل للتتبع حول العالم

المزيد من قطع Bosch Rexroth

Rexroth PDP01 02 328104 UsedمستعملRexroth PDP01 02 328104 Used
رقم القطعة (MPN): PDP01 02 328104 · Bosch Rexroth
€475.94
عرض التفاصيل
Rexroth 3608875426 NewجديدRexroth 3608875426 New
رقم القطعة (MPN): 3608875426 · Bosch Rexroth
€106.00
عرض التفاصيل
Rexroth HCS03.1E-W0150-A-05-NNBV UsedمستعملRexroth HCS03.1E-W0150-A-05-NNBV Used
رقم القطعة (MPN): HCS03.1E-W0150-A-05-NNBV · Bosch Rexroth
€3,445.00
عرض التفاصيل
Rexroth HCS01.1E-W0009 -A-02-B-ET-EC- NN-L4-NN-FW UsedمستعملRexroth HCS01.1E-W0009 -A-02-B-ET-EC- NN-L4-NN-FW Used
رقم القطعة (MPN): HCS01.1E-W0009 -A-02-B-ET-EC- NN-L4-NN-FW · Bosch Rexroth
€210.94
عرض التفاصيل