B&R 8CVE28000HC00.00-1
Demander un devis
En bref
| Disponibilité | Confirmation sur demande |
| Catégorie | Connection boxes |
| Cycle de vie | active |
| Garantie | 12 mois (neuf) · 3 mois (occasion/reconditionné) |
| Poids | 7 kg |
Livraison & disponibilité
Quand 8CVE28000HC00.00-1 peut-il être expédié ?
8CVE28000HC00.00-1 est approvisionné sur demande — demandez un devis et nous confirmerons la disponibilité exacte et le délai de livraison pour cette pièce précise.
Puis-je récupérer 8CVE28000HC00.00-1 en personne ?
Un retrait dans notre entrepôt de Groningue, Pays-Bas, est parfois possible — contactez-nous avant de commander pour vérifier la disponibilité et convenir d'un horaire de retrait.
La livraison express est-elle disponible ?
Oui — mentionnez-le lors de votre demande de devis pour 8CVE28000HC00.00-1 et nous inclurons les options de livraison express dans notre réponse.
Notre usine est à l'arrêt et nous en avons besoin de toute urgence — pouvez-vous aider ?
En cas de panne critique, contactez-nous directement au +31 (0)50-7110348 ou à sales@partnerplc.com — nous étudierons une livraison le jour même par coursier ou taxi dédié pour 8CVE28000HC00.00-1, selon la disponibilité et la destination.
Remote power distribution up to 30 kW using up to four hybrid cable outletsSafeguards the DC busDiagnostics for all connectionsIntegrated connections for local I/O nodes ACOPOSremote/ACOPOSmotor connection box, AS, IP65, cold plate mounting, 4x connection for hybrid cable, 2x 24 VDC Out
Caractéristiques
Specifications
| B&R ID code | 0xB41D |
| Status indicators | Safety status, interface status |
| Dynamic node allocation (DNA) | Yes |
| Cooling and mounting type | Cold plate mounting |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | Not applicable |
| Functional safety | Yes |
| UL | cULus E225616 Power conversion equipment |
| Nominal | 5 to 40°C |
| DC+, DC-, PE | Cage clamp terminal block |
| Shield connection | No |
| With wire end sleeves | 0.25 to 10 mm² |
| UL/C-UL-US | 26 to 12 |
| CSA | - |
| Terminal cross sections (cable diameter) | 5 to 9 mm (M16 cable grommet) |
| Max. line length | 30 m |
| Quantity | 2 |
| Input voltage | 24 VDC -25% / +20% |
| Max. power consumption | In preparation |
| 24 VDC, COM, PE | Cage clamp terminal block |
| Type | POWERLINK (V1/V2) 100BASE-T (ANSI/IEE 802.3) |
| Tripping characteristic | Fast-acting |
| 40°C | 5 A |
| 60°C | 7.5 A |
| 20 A | In preparation |
| 15 A | In preparation |
| Continuous current of enable outputs | Max. 500 mA |
| Starting at 500 m above sea level | 10% per 1,000 m |
| DC+ and DC- | Yes |
| 24 VDC | Yes |
| Variant | Cage clamp terminal block |
| Output voltage | Depends on the 24 VDC power supply |
| Continuous current | Max. 8 A (max. 4 A per pin) |
| Overload-proof | No (overload status can be retrieved via fieldbus) |
| Short-circuit proof | Yes |
| 24 VDC, COM | Female M8 connector |
| Line length | Max. 100 m between two stations (segment length) |
| Transfer rate | 100 Mbit/s |
| Maximum | 60°C |
| Permissible input current | Max. 2 A |
| With plastic wire end sleeves | 0.25 to 1.5 mm² |
| Hanging vertically | Yes |
| Horizontal, face up | Yes |
| Standing horizontally | Yes |
| Pollution degree per EN 61800-5-1 | 2 (non-conductive pollution) |
| Overvoltage category per EN 61800-5-1 | III |
| Degree of protection per EN 60529 | IP65 |
| Storage | 5 to 95%, non-condensing |
| Transport | Max. 95% at 40°C |
| Operation | 5 to 85%, non-condensing |
| Width | 293 mm |
| Height | 328 mm |
| Depth | 80 mm |
| Weight | 7 kg |
Plus de pièces B&R
OccasionB&R 5C5001.01 IPC 5000 5D5500.06 Used
OccasionB&R 8BVI0028HWD0.000-1 Used Rev.O0
OccasionB&R 5PC720.1505-K07 - 5P62:0A-03 Used