INTERFACE MODULE XI813101
Solicitar presupuesto
Datos rápidos
| Disponibilidad | Confirmación bajo consulta |
| Categoría | XI8 System Modules |
| Ciclo de vida | active |
| Garantía | 12 meses (nuevo) · 3 meses (usado/reacondicionado) |
Envío y disponibilidad
¿Cuándo se puede enviar R912009610?
R912009610 se abastece bajo pedido — solicite un presupuesto y confirmaremos la disponibilidad exacta y el plazo de entrega para esta unidad concreta.
¿Puedo recoger R912009610 en persona?
Es posible recoger el pedido en nuestro almacén de Groningen, Países Bajos — contáctenos antes de realizar el pedido para confirmar disponibilidad y acordar un horario de recogida.
¿Está disponible el envío exprés?
Sí — menciónelo al solicitar un presupuesto para R912009610 e incluiremos las opciones de envío exprés en nuestra respuesta.
Nuestra planta está parada y lo necesitamos urgentemente — ¿pueden ayudar?
Ante una avería crítica, contáctenos directamente al +31 (0)50-7110348 o a sales@partnerplc.com — estudiaremos un envío urgente el mismo día o un transporte dedicado para R912009610, según disponibilidad y destino.
The active voltage boost module XI813101 is used to boost the peripheral circuit (UP) and logical circuit (UL) in a ctrlX I/O station. It supplies the connected I/O modules with the peripheral voltage (UP) of DC 24 V, 8 A, which is internally galvanically isolated from the peripheral voltage supply of the preceding modules and and the logical voltage (UL) of DC 24 V, 3 A. The voltages and the currents fed in are measured internally and applied to the process data. The logic voltage supply as well as the EtherCAT-based module communication are routed through the module.
Especificaciones
Specifications
| Connection type | Push-in |
| Width [mm] | 20 |
| Height [mm] | 105 |
| Depth [mm] | 99 |
| International protection code | IP20 |
| Protection class | III |
| Backplane-Bus | Standard-EtherCAT über LVDS |
| Bit width, input data in the process data image (including fill bits) | 10 bytes |
| Maximum power dissipation in the module [W] | 1.296 |
| Channel LEDs | Display status of Power supply |
| Post-assembly position | Vertical, on a horizontal support rail |
| Electrical isolation | 1200 V DC UP to UL, 707 V DC UP/UL to FE, both tested for 60 s;(not evaluated by UL) |
| Fuse protection (UP) | No internal fuse protection. The operator has to provide protection against overload by an external fuse. |
| Fuse protection (UL) | Internal with a protective fuse |
| Transient protection | Present, suppressor diodes, pulse load up to 1500 W |
| Maximum number of modules per station | 30 |
| Current requirement UL | Max. 50 mA (without I/O modules), 3 A max. (complete system with I/O modules) |
| Current requirement Up | Typ. 4 mA (without I/O modules, 8 A max. (complete system with I/O modules) |
| Nominal voltage (UL/UP) | DC 24 V (19.2 V to 30 V, including tolerance and residual ripple) PELV/SELV (safety extra-low voltage) |
| Overvoltage category | 2 |
| Voltage dips at power supply interfaces | PS1 <1 ms, evaluation criterion A |
| Overvoltage protection UL and UP | Present, fuses can trigger in case of overvoltage |
| Conductor cross-section | AWG: 24 ... 16; Flexible: 0.2-1.5 mm²; rigid: 0.2-1.5 mm² |
| Permissible air humidity (storage) [%] | 10-95 |
| Permissible air humidity (transport) [%] | 10-95 |
| Ambient temperature (storage and transport) [°C] | -40-70 |
| Ambient temperature during operation | 2,000 m to 3,000 m: -25 °C to +50 °C; 3,000 m to 4,000 m: -25 °C to +45 °C; 4,000 m to 5,000 m: -25 °C to +40 °C; Up to 2,000 m: -25 °C to +55 °C |
| Maximum operating altitude [m] | 5000 |
| Contamination level | 2, no condensation |
| Weight [kg] | 0.13 |
Más piezas Bosch Rexroth
UsadoRexroth HCS03.1E-W0150-A-05-NNBV Used
UsadoRexroth HCS01.1E-W0009 -A-02-B-ET-EC- NN-L4-NN-FW Used