FUNCTIONAL MODULE XI613101
طلب عرض سعر
معلومات سريعة
| التوفر | يُؤكَّد عند الطلب |
| الفئة | XI6 Technology Modules |
| دورة الحياة | active |
| الضمان | 12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد) |
الشحن والتوفر
متى يمكن شحن R912009618؟
R912009618 يُورَّد عند الطلب — اطلب عرض سعر وسنؤكد التوفر الدقيق ومدة الشحن لهذه الوحدة تحديدًا.
هل يمكنني استلام R912009618 شخصيًا؟
قد يكون الاستلام الشخصي من مستودعنا في غرونينغن، هولندا ممكنًا — تواصل معنا قبل الطلب للتحقق من التوفر وترتيب موعد الاستلام.
هل التوصيل السريع متاح؟
نعم — اذكر ذلك عند طلب عرض سعر لـR912009618 وسنُدرج خيارات التوصيل السريع في ردنا.
مصنعنا متوقف عن العمل ونحتاج هذا بشكل عاجل — هل يمكنكم المساعدة؟
في حالة عطل حرج، تواصل معنا مباشرة على +31 (0)50-7110348 أو sales@partnerplc.com — يمكننا النظر في توصيل بواسطة ساعٍ في نفس اليوم أو توصيل مخصص عاجل لـR912009618، حسب التوفر والوجهة.
The XI613101 encoder module enables the connection of an incremental encoder with differential signals (RS422) in a ctrlX I/O station. Input frequencies of up to 1 MHz can be evaluated. Alternatively, it can be used as an up/down counter. The 5 V encoder supply can be provided directly via the module's connection points. The four additional digital inputs, which are designed in 2-wire technology, are used to record application-specific signals (e.g. blocking, saving, referencing). <br><br>The logic and peripheral voltage supply as well as the EtherCAT-based module communication are routed through the module.
المواصفات
Specifications
| Connection type | Push-in |
| Connectivity technology | Differential RS422 |
| Number of channels | 1 |
| Width [mm] | 12 |
| Height [mm] | 105 |
| Depth [mm] | 99 |
| International protection code | IP20 |
| Protection class | III |
| Backplane-Bus | Standard-EtherCAT über LVDS |
| EMC resistance | EN 61000-6-2 and EN 61000-6-4 |
| Bit width, output data in the process data image | 2 Bytes |
| Bit width, input data in the process data image (including fill bits) | 18 bytes |
| Maximum power dissipation in the module [W] | 2.003 |
| Input filter | 3 ms |
| Fuse protection (UOUT24 V) | Auto switch-off at overload |
| Channel LEDs | Per channel |
| Post-assembly position | Vertical, on a horizontal support rail |
| Electrical isolation | 1200 V DC UP to UL, 707 V DC UP/UL to FE, both tested for 60 s;(not evaluated by UL) |
| Current requirement UL | 0.0397 A |
| Current requirement Up | 0.032 A + load |
| Max. current up per terminal point [A] | 1 |
| Max. net current Up module [A] | 3 |
| Input current [mA] | 3.6 |
| Signal voltage "0" [V] | -3-5 |
| Signal voltage "1" [V] | 15-30 |
| Nominal voltage (UL/UP) | DC 24 V (19.2 V to 30 V, including tolerance and residual ripple) PELV/SELV (safety extra-low voltage) |
| Overvoltage category | 2 |
| Nominal input voltage [V DC] | 24 |
| Signal type | Incremental Encoder, TTL |
| Conductor cross-section | AWG: 24 ... 16; Flexible: 0.2-1.5 mm²; rigid: 0.2-1.5 mm² |
| Permissible air humidity (storage) [%] | 10-95 |
| Permissible air humidity (transport) [%] | 10-95 |
| Ambient temperature (storage and transport) [°C] | -40-70 |
| Ambient temperature during operation | 2,000 m to 3,000 m: -25 °C to +40 °C; Up to 2000 m: -25°C to +45°C |
| Maximum operating altitude [m] | 3000 |
| Contamination level | 2, no condensation |
| Weight [kg] | 0.12 |
المزيد من قطع Bosch Rexroth
مستعملRexroth PDP01 02 328104 Used
مستعملRexroth HCS03.1E-W0150-A-05-NNBV Used
مستعملRexroth HCS01.1E-W0009 -A-02-B-ET-EC- NN-L4-NN-FW Used