DIGITAL INPUT MODULE XI141202
طلب عرض سعر
معلومات سريعة
| التوفر | يُؤكَّد عند الطلب |
| الفئة | XI1 Digital Inputs |
| دورة الحياة | active |
| الضمان | 12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد) |
الشحن والتوفر
متى يمكن شحن R911421639؟
R911421639 يُورَّد عند الطلب — اطلب عرض سعر وسنؤكد التوفر الدقيق ومدة الشحن لهذه الوحدة تحديدًا.
هل يمكنني استلام R911421639 شخصيًا؟
قد يكون الاستلام الشخصي من مستودعنا في غرونينغن، هولندا ممكنًا — تواصل معنا قبل الطلب للتحقق من التوفر وترتيب موعد الاستلام.
هل التوصيل السريع متاح؟
نعم — اذكر ذلك عند طلب عرض سعر لـR911421639 وسنُدرج خيارات التوصيل السريع في ردنا.
مصنعنا متوقف عن العمل ونحتاج هذا بشكل عاجل — هل يمكنكم المساعدة؟
في حالة عطل حرج، تواصل معنا مباشرة على +31 (0)50-7110348 أو sales@partnerplc.com — يمكننا النظر في توصيل بواسطة ساعٍ في نفس اليوم أو توصيل مخصص عاجل لـR911421639، حسب التوفر والوجهة.
The digital input module XI141202 is an up and down counter (32 bit) and used to detect binary 24 V control signals in a ctrlX I/O station. The module is designed with two separate counters, each with its own control input. This control input determines the counter direction or is used as Gate input. The two outputs are switched depending on the counter reading and can be used as fast control signals. The signal state of the inputs and outputs is shown at the channel LED on the removable peripheral plug. <br><br>The logic and peripheral supply as well as the EtherCAT-based module communication are routed through the module.
المواصفات
Specifications
| Connection type | Push-in |
| Connectivity technology | 2-wire technique |
| Number of channels | 2 |
| Max. output current per channel [A] | 0.5 |
| Width [mm] | 12 |
| Height [mm] | 105 |
| Depth [mm] | 99 |
| International protection code | IP20 |
| Protection class | III |
| Backplane-Bus | Standard-EtherCAT über LVDS |
| EMC resistance | EN 61000-6-2 and EN 61000-6-4 |
| Bit width, output data in the process data image | 4 Bytes |
| Bit width, input data in the process data image (including fill bits) | 14 bytes |
| Maximum power dissipation in the module [W] | 1.95 |
| Input filter | user selectable (25, 100, 500, 1000, 3000) |
| Inductive switch-off energy | Max. 150 mJ |
| Inverse polarity protection up to [V] | 30 |
| Nominal load [Ohm] | 48 |
| Fuse protection (UOUT24 V) | Internal with a protective fuse |
| Channel LEDs | Per channel |
| Post-assembly position | Vertical, on a horizontal support rail |
| Electrical isolation | 1200 V DC UP to UL, 707 V DC UP/UL to FE, both tested for 60 s;(not evaluated by UL) |
| Rise time (TRise) | 29 µs |
| Fall time (TFALL) | 19 µs |
| Feedback voltage resistance | Not resistant to feedback, external measures required |
| Current requirement UL | 35 mA |
| Current requirement Up | 36 mA + load |
| Max. current up per terminal point [A] | 1 |
| Max. net current Up module [A] | 2 |
| Net current module outputs [A] | 1 |
| Input current [mA] | 2.4 |
| Signal voltage "0" [V] | -3-5 |
| Signal voltage "1" [V] | 11-30 |
| Nominal voltage (UL/UP) | DC 24 V (19.2 V to 30 V, including tolerance and residual ripple) PELV/SELV (safety extra-low voltage) |
| Overvoltage category | 2 |
| Nominal output voltage [V DC] | 24 |
| Nominal input voltage [V DC] | 24 |
| Conductor cross-section | AWG: 24 ... 16; Flexible: 0.2-1.5 mm²; rigid: 0.2-1.5 mm² |
| Overload protection | pulse operation for outputs, N/A for inputs |
| Permissible air humidity (storage) [%] | 10-95 |
| Permissible air humidity (transport) [%] | 10-95 |
| Ambient temperature (storage and transport) [°C] | -40-70 |
| Ambient temperature during operation | 2,000 m to 3,000 m: -25 °C to +50 °C; 3,000 m to 4,000 m: -25 °C to +45 °C; 4,000 m to 5,000 m: -25 °C to +40 °C; Up to 2,000 m: -25 °C to +55 °C |
| Maximum operating altitude [m] | 5000 |
| Contamination level | 2, no condensation |
| Weight [kg] | 0.11 |
المزيد من قطع Bosch Rexroth
مستعملRexroth PDP01 02 328104 Used
مستعملRexroth HCS03.1E-W0150-A-05-NNBV Used
مستعملRexroth HCS01.1E-W0009 -A-02-B-ET-EC- NN-L4-NN-FW Used