DIGITAL INPUT MODULE XI141202
견적 요청
요약 정보
| 재고 상태 | 요청 시 확인 |
| 카테고리 | XI1 Digital Inputs |
| 라이프사이클 | active |
| 보증 | 12개월(신품) · 3개월(중고/재제조) |
배송 & 재고
R911421639은(는) 언제 배송될 수 있나요?
R911421639은(는) 요청 시 소싱됩니다 — 견적을 요청해 주시면 이 특정 제품의 정확한 재고 및 배송 일정을 확인해 드립니다.
R911421639을(를) 직접 픽업할 수 있나요?
네덜란드 흐로닝언 창고에서 직접 픽업이 가능할 수 있습니다 — 주문 전에 연락하셔서 재고와 픽업 시간을 확인해 주세요.
특급 배송이 가능한가요?
네 — R911421639에 대한 견적을 요청하실 때 말씀해 주시면 답변에 특급 배송 옵션을 포함해 드립니다.
공장 가동이 중단되어 긴급히 필요합니다 — 도와주실 수 있나요?
긴급 고장 상황이시라면 +31 (0)50-7110348 또는 sales@partnerplc.com으로 직접 연락해 주세요 — 재고 및 배송지에 따라 R911421639에 대한 당일 택배 또는 전용 긴급 배송을 검토해 드립니다.
The digital input module XI141202 is an up and down counter (32 bit) and used to detect binary 24 V control signals in a ctrlX I/O station. The module is designed with two separate counters, each with its own control input. This control input determines the counter direction or is used as Gate input. The two outputs are switched depending on the counter reading and can be used as fast control signals. The signal state of the inputs and outputs is shown at the channel LED on the removable peripheral plug. <br><br>The logic and peripheral supply as well as the EtherCAT-based module communication are routed through the module.
사양
Specifications
| Connection type | Push-in |
| Connectivity technology | 2-wire technique |
| Number of channels | 2 |
| Max. output current per channel [A] | 0.5 |
| Width [mm] | 12 |
| Height [mm] | 105 |
| Depth [mm] | 99 |
| International protection code | IP20 |
| Protection class | III |
| Backplane-Bus | Standard-EtherCAT über LVDS |
| EMC resistance | EN 61000-6-2 and EN 61000-6-4 |
| Bit width, output data in the process data image | 4 Bytes |
| Bit width, input data in the process data image (including fill bits) | 14 bytes |
| Maximum power dissipation in the module [W] | 1.95 |
| Input filter | user selectable (25, 100, 500, 1000, 3000) |
| Inductive switch-off energy | Max. 150 mJ |
| Inverse polarity protection up to [V] | 30 |
| Nominal load [Ohm] | 48 |
| Fuse protection (UOUT24 V) | Internal with a protective fuse |
| Channel LEDs | Per channel |
| Post-assembly position | Vertical, on a horizontal support rail |
| Electrical isolation | 1200 V DC UP to UL, 707 V DC UP/UL to FE, both tested for 60 s;(not evaluated by UL) |
| Rise time (TRise) | 29 µs |
| Fall time (TFALL) | 19 µs |
| Feedback voltage resistance | Not resistant to feedback, external measures required |
| Current requirement UL | 35 mA |
| Current requirement Up | 36 mA + load |
| Max. current up per terminal point [A] | 1 |
| Max. net current Up module [A] | 2 |
| Net current module outputs [A] | 1 |
| Input current [mA] | 2.4 |
| Signal voltage "0" [V] | -3-5 |
| Signal voltage "1" [V] | 11-30 |
| Nominal voltage (UL/UP) | DC 24 V (19.2 V to 30 V, including tolerance and residual ripple) PELV/SELV (safety extra-low voltage) |
| Overvoltage category | 2 |
| Nominal output voltage [V DC] | 24 |
| Nominal input voltage [V DC] | 24 |
| Conductor cross-section | AWG: 24 ... 16; Flexible: 0.2-1.5 mm²; rigid: 0.2-1.5 mm² |
| Overload protection | pulse operation for outputs, N/A for inputs |
| Permissible air humidity (storage) [%] | 10-95 |
| Permissible air humidity (transport) [%] | 10-95 |
| Ambient temperature (storage and transport) [°C] | -40-70 |
| Ambient temperature during operation | 2,000 m to 3,000 m: -25 °C to +50 °C; 3,000 m to 4,000 m: -25 °C to +45 °C; 4,000 m to 5,000 m: -25 °C to +40 °C; Up to 2,000 m: -25 °C to +55 °C |
| Maximum operating altitude [m] | 5000 |
| Contamination level | 2, no condensation |
| Weight [kg] | 0.11 |
Bosch Rexroth의 다른 부품
중고Rexroth HCS03.1E-W0150-A-05-NNBV Used
중고Rexroth HCS01.1E-W0009 -A-02-B-ET-EC- NN-L4-NN-FW Used