Pepperl Fuchs WHA-BLT-F9D0-N-A0-Z0-Ex1 – Bullet WirelessHART Adapter. Installation in Zone 0, 20

Bullet WirelessHART Adapter. Installation in Zone 0, 20, Installation in Class I, II, Division 1, Installation in Class III, Installation in Class I, Division 2, Ex i circuits for Ex i field devices, Cast aluminum housing, Loop powered, Direct mounting on HART or 4 mA ... 20 mA field device, Encapsulated antenna, Up to 8 field devices in multidrop. Rated voltage: 7 ... 30 V DC. Rated current: < 1 mA , max. 25 mA. Output current: 3.2 ... 25 mA. Supply: loop power for field devicesvoltage: 1 ... 2.5 V DC, adjustable in steps of 0.5 V. Connection: - 5 wires, 600 mm long, exiting from male thread NPT1/2 - 1 external grounding point. HART communication: . ProtocolHART 7.1, backward compatibleNumber of devicesup to 8 HART field devices (depending on installation): . Protocol: HART 7.1, backward compatible. Number of devices: up to 8 HART field devices (depending on installation). Interface: internal antenna. Communication: WirelessHART specifications- physical layer: IEEE 802.15.4.2006- frequency band: 2.4 GHz (ISM band, licence free)- maximum transmit power: +10 dBm- outdoor transmission range: 235 m- communication standard: WirelessHART acc. to IEC 62591. Radio and telecommunication terminal equipment: The usage of 2.4 GHz equipment is bound to local restrictions. Ensure that restrictions allow usage of this product before commisioning.. Directive 2014/53/EUEN 300 328 V2.1.1:2016 EN 301 489-1 V2.2.0:2017 EN 301 489-17 V3.2.0:2017FCC CFR47 Part 15 B and CANSI C63.4-2003 , FCC ID: X89-WA1101: . Directive 2014/53/EU: EN 300 328 V2.1.1:2016 EN 301 489-1 V2.2.0:2017 EN 301 489-17 V3.2.0:2017. FCC CFR47 Part 15 B and C: ANSI C63.4-2003 , FCC ID: X89-WA1101. Degree of protection: IEC 60529:2013. Ambient temperature: temperature class T5: -40 ... 85 °C (-40 ... 185 °F) temperature class T6: -40 ... 75 °C (-40 ... 167 °F). Storage temperature: -40 ... 85 °C (-40 ... 185 °F). Relative humidity: max. 100 %. Degree of protection: IP67. Material: aluminum alloy with polyurethane enamel paint. Mass: 460 g. Dimensions: 60.8 x 60.8 x 100 mm (l x w x h). Height100 mmDiameter60.8 mm: . Height: 100 mm. Diameter: 60.8 mm. EU-type examination certificate: FM 17 ATEX 0046 X. Marking II 1G Ex ia IIC T6...T5 Ga [exsign] II 1D Ex ia IIIC T95°C Da: . Marking: II 1G Ex ia IIC T6...T5 Ga [exsign] II 1D Ex ia IIIC T95°C Da. Directive conformity: . Directive 2014/34/EUEN 60079-0:2012+A11:2013 , EN 60079-11:2012: . Directive 2014/34/EU: EN 60079-0:2012+A11:2013 , EN 60079-11:2012. FM approval: FM 17 NUS 0010 FM 17 US 0191 X. Control drawing116-0425 (cFMus)Approved forIS Class I, II, III, Division 1, Groups A-G Class I, Zone 0, AEx ia IIC T6...T5 Ga Zone 20, AEx ia IIIC T95°C Da: . Control drawing: 116-0425 (cFMus). Approved for: IS Class I, II, III, Division 1, Groups A-G Class I, Zone 0, AEx ia IIC T6...T5 Ga Zone 20, AEx ia IIIC T95°C Da. CSA approval: FM 17 NCA 0004 FM 17 CA 0102 X. Control drawing116-0425 (cFMus)Approved forIS Class I, II, III, Division 1, Groups A-G Ex ia IIC T6...T5 Ga Ex ia IIIC T95°C Da associated apparatus [Ex ia]: . Control drawing: 116-0425 (cFMus). Approved for: IS Class I, II, III, Division 1, Groups A-G Ex ia IIC T6...T5 Ga Ex ia IIIC T95°C Da associated apparatus [Ex ia]. IECEx approval: . IECEx certificateIECEx FMG 17.0020XIECEx markingEx ia IIC T6...T5 Ga , Ex ia IIIC T95°C DaStandardsIEC 60079-0:2011 , IEC 60079-1:2014 , IEC 60079-11:2011 , IEC 60079-31:2013: . IECEx certificate: IECEx FMG 17.0020X. IECEx marking: Ex ia IIC T6...T5 Ga , Ex ia IIIC T95°C Da. Standards: IEC 60079-0:2011 , IEC 60079-1:2014 , IEC 60079-11:2011 , IEC 60079-31:2013. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Specifications