Pepperl Fuchs VL18-54-M-LAS/32/40a/82b/118 – Retroreflective sensor. Retroreflective sensor with…

Retroreflective sensor. Retroreflective sensor with polarization filter, M18 threaded housing made of brass, nickel plated, Visible red light, pulsed LASER light, Array control panel with highly visible LED display, Flashing power on LED in case of short-circuit, Multiple device installation possible, no mutual interference (no cross-talk). Effective detection range: 0 ... 18 m. Reflector distance: 0.06 ... 18 m. Threshold detection range: 20 m. Reference target: H85 reflector. Light source: laser diode. Light type: modulated visible red light. Polarization filter: yes. Laser nominal ratings: . NoteLASER LIGHT , DO NOT STARE INTO BEAMLaser class1Wave length655 nmBeam divergence7.5 mradPulse length4 µsRepetition rate11.91 kHzmax. pulse energy2.25 nJ: . Note: LASER LIGHT , DO NOT STARE INTO BEAM. Laser class: 1. Wave length: 655 nm. Beam divergence: 7.5 mrad. Pulse length: 4 µs. Repetition rate: 11.91 kHz. max. pulse energy: 2.25 nJ. Diameter of the light spot: 150 mm x 100 mm at a distance of 12 m. Opening angle: 1 °. Optical face: frontal. Ambient light limit: 30000 Lux. Hysteresis: < 15 %. MTTFd: 700 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green, flashes in case of short-circuit. Function indicator: LED yellow, light with free light beam , flashes when falling short of the operating reserve , OFF when light beam is interrupted. Control elements: Sensitivity adjuster, light/dark switch. Operating voltage: 10 ... 30 V DC , class 2. No-load supply current: < 20 mA. Protection class: II , rated voltage ≤ 50 V AC with pollution degree 1-2 according to IEC 60664-1. Stability alarm output: 1 PNP, inactive when falling short of the operating reserve. Switching type: light/dark on, switchable. Signal output: 1 PNP output, short-circuit protected, reverse polarity protected, open collector. Switching voltage: 30 V DC. Switching current: max. 200 mA. Voltage drop: ≤ 2.5 V DC. Switching frequency: 500 Hz. Response time: 1 ms. Product standard: EN 60947-5-2. Standard conformity: . Laser classIEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007: . Laser class: IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. EAC conformity: TR CU 020/2011. UL approval: cULus Listed, Type 1 enclosure. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -25 ... 55 °C (-13 ... 131 °F). Storage temperature: -30 ... 70 °C (-22 ... 158 °F). Degree of protection: IP67. Connection: 4-pin, M12 x 1 connector. Material: . Housingbrass, nickel-platedOptical facePMMA: . Housing: brass, nickel-plated. Optical face: PMMA. Mass: 60 g. Dimensions: . Length65 mmDiameter18 mm: . Length: 65 mm. Diameter: 18 mm

Specifications