Pepperl Fuchs UMB800-18H40-E5-2M
Request a Quote
Quick facts
| Availability | Confirmed on request |
| Category | Diffuse Mode and Retroreflective Sensors |
| Lifecycle | active |
| Warranty | 12-month (new) · 3-month (used/refurbished) |
Shipping & availability
When can UMB800-18H40-E5-2M be shipped?
UMB800-18H40-E5-2M is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up UMB800-18H40-E5-2M in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for UMB800-18H40-E5-2M and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for UMB800-18H40-E5-2M, subject to availability and destination.
Ultrasonic sensor. Single head system, Front of transducer and housing manufactured entirely from stainless steel, Degree of protection IP68 / IP69K, Short version: 55 mm, Series: UMB-18H, Operating voltage: 10 ... 30 V DC, Output type: 1 switching output E5, PNP NO/NC, programmable, CCC approval: CCC approval / marking not required for products rated ≤36 V, Connection type: cable PUR , 2 m , Polyether based, Housing: Stainless steel 1.4404 / AISI 316L. Sensing range: 70 ... 800 mm. Adjustment range: 90 ... 800 mm. Dead band: 0 ... 70 mm. Standard target plate: 100 mm x 100 mm. Transducer frequency: approx. 170 kHz. Response delay: approx. 100 ms. Operating voltage: 10 ... 30 V DC. No-load supply current: ≤ 15 mA. Input type: 1 program inputoperating distance 1: -UB ... +1 V, operating distance 2: +6 V ... +UB input impedance: > 4,7 kΩ program pulse: ≥ 1 s. Output type: 1 switching output E5, PNP NO/NC, programmable. Rated operating current: 200 mA , short-circuit/overload protected. Voltage drop: ≤ 3 V. Repeat accuracy: ± 0.5 % of full-scale value. Switching frequency: ≤ 4 Hz. Range hysteresis: 1 % of the set operating distance. Temperature influence: ± 1.5 % of full-scale value. Standard conformity: . StandardsEN IEC 60947-5-2:2020 IEC 60947-5-2:2019: . Standards: EN IEC 60947-5-2:2020 IEC 60947-5-2:2019. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -25 ... 85 °C (-13 ... 185 °F). Storage temperature: -40 ... 85 °C (-40 ... 185 °F). Connection type: cable PUR , 2 m , Polyether based. Core cross section: 4 x 0.19 mm2. Degree of protection: IP68 / IP69K. Material: . HousingStainless steel 1.4404 / AISI 316LTransducerStainless steel 1.4435 / AISI 316LSealCable seal : TPU , Elastollan 1185 A10: . Housing: Stainless steel 1.4404 / AISI 316L. Transducer: Stainless steel 1.4435 / AISI 316L. Seal: Cable seal : TPU , Elastollan 1185 A10. Mass: 90 g. Dimensions: . Length55 mmDiameter18 mm: . Length: 55 mm. Diameter: 18 mm. Output: Switch point A1: 90 mm Switch point A2: 800 mm Output mode: Window mode Output logic: normally open
Specifications
General specifications
| Sensing range | 70 ... 800 mm |
| Adjustment range | 90 ... 800 mm |
| Dead band | 0 ... 70 mm |
| Standard target plate | 100 mm x 100 mm |
| Transducer frequency | approx. 170 kHz |
| Response delay | approx. 100 ms |
Electrical specifications
| Operating voltage | 10 ... 30 V DC UB |
| No-load supply current | ≤ 15 mA I0 |
Input
| Input type | 1 program inputoperating distance 1: -UB ... +1 V, operating distance 2: +6 V ... +UB input impedance: > 4,7 kΩ program pulse: ≥ 1 s |
Output
| Output type | 1 switching output E5, PNP NO/NC, programmable |
| Rated operating current | 200 mA , short-circuit/overload protected Ie |
| Voltage drop | ≤ 3 V Ud |
| Repeat accuracy | ± 0.5 % of full-scale value |
| Switching frequency | ≤ 4 Hz f |
| Range hysteresis | 1 % of the set operating distance H |
| Temperature influence | ± 1.5 % of full-scale value |
Compliance with standards and directives
| Standard conformity | |
| StandardsEN IEC 60947-5-2:2020 IEC 60947-5-2:2019 | Standards |
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
Approvals and certificates
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions
| Ambient temperature | -25 ... 85 °C (-13 ... 185 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Mechanical specifications
| Connection type | cable PUR , 2 m , Polyether based |
| Core cross section | 4 x 0.19 mm2 |
| Degree of protection | IP68 / IP69K |
| Material | |
| HousingStainless steel 1.4404 / AISI 316LTransducerStainless steel 1.4435 / AISI 316LSealCable seal : TPU , Elastollan 1185 A10 | Housing |
| Housing | Stainless steel 1.4404 / AISI 316L |
| Transducer | Stainless steel 1.4435 / AISI 316L |
| Seal | Cable seal : TPU , Elastollan 1185 A10 |
| Mass | 90 g |
| Dimensions | |
| Length55 mmDiameter18 mm | Length |
| Length | 55 mm |
| Diameter | 18 mm |
Factory settings
| Output | Switch point A1: 90 mm Switch point A2: 800 mm Output mode: Window mode Output logic: normally open |
More Pepperl Fuchs parts
NewPepperl + Fuchs KFD2-GUT-EX1.D New open box
Available on requestPepperl Fuchs V19-W-BK15M-PUR-U-V19-G
Available on requestPepperl Fuchs V1SD-G-GN65M-PUR-E1S-V45-G