Pepperl Fuchs UC4000-L2M-I-0,3M-APS5P

Ultrasonic sensor. Single head system, Extended temperature range, Rugged metal base, Sensor head bidirectional and rotatable, Series: -L2, Operating voltage: 10 ... 30 V DC , ripple 10 %_SS, Interface type: Serial interface (programming adapter required) <BR>9600 BPS, no parity, 8 data bits, 1 stop bit, Output type: 1 analog output 4 ... 20 mA, UL approval: UL Recognized , General purpose , Class 2 power source, CCC approval: CCC approval / marking not required for products rated ≤36 V. Sensing range: 200 ... 4000 mm. Adjustment range: 240 ... 4000 mm. Dead band: 0 ... 200 mm. Standard target plate: 100 mm x 100 mm. Transducer frequency: approx. 85 kHz. Response delay: minimum: 110 ms factory setting: 615 ms. Time delay before availability: ≤ 1600 ms. LED green: Operating display. LED yellow: object in evaluation range. LED red: error. Operating voltage: 10 ... 30 V DC , ripple 10 %SS. No-load supply current: ≤ 50 mA. Interface type: Serial interface (programming adapter required) 9600 BPS, no parity, 8 data bits, 1 stop bit. Input/output type: 1 synchronization connection, bidirectional. 0 Level0 ... 1 V1 Level4 V ... UBInput impedance> 12 kΩOutput current< 12 mAPulse length0.5 ... 300 ms (level 1)Pulse interval≥ 62.5 ms (level 0): . 0 Level: 0 ... 1 V. 1 Level: 4 V ... UB. Input impedance: > 12 kΩ. Output current: < 12 mA. Pulse length: 0.5 ... 300 ms (level 1). Pulse interval: ≥ 62.5 ms (level 0). Synchronization frequency: . Common mode operation≤ 16 HzMultiplex operation≤ 17 Hz / n , n = number of sensors , n ≤ 10 (factory setting: n = 5 ): . Common mode operation: ≤ 16 Hz. Multiplex operation: ≤ 17 Hz / n , n = number of sensors , n ≤ 10 (factory setting: n = 5 ). Input type: 1 program input. Level (evaluation limit 1): 0 ... 1 V. Level (evaluation limit 2): 4 V ... UB. Input impedance: > 12 kΩ. Pulse length: 2 ... 10 s. Output type: 1 analog output 4 ... 20 mA. Resolution: Evaluation range [mm]/3200, however ≥ 0.4 mm. Deviation of the characteristic curve: ≤ 0.2 % of full-scale value. Repeat accuracy: ≤ 0.1 % of full-scale value. Load impedance: ≤ 500 Ω at UB ≥ 14V ≤ 300 Ω at UB < 14V. Temperature influence: ≤ 1.5 % of full-scale value. Standard conformity: . StandardsEN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003: . Standards: EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003. UL approval: UL Recognized , General purpose , Class 2 power source. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -40 ... 70 °C (-40 ... 158 °F). Storage temperature: -40 ... 85 °C (-40 ... 185 °F). Connection type: fixed cable with plug. Degree of protection: IP67. Material: . HousingPA-GF35Transducerepoxy resin/hollow glass sphere mixture; polyurethane foam: . Housing: PA-GF35. Transducer: epoxy resin/hollow glass sphere mixture; polyurethane foam. Connector: . Number of pins5Connection assemblyAMP connector Superseal 282107-1 AMP contact Superseal 282109-1: . Number of pins: 5. Connection assembly: AMP connector Superseal 282107-1 AMP contact Superseal 282109-1. Cable: . Cable diameter7.25 mm ± 0.2 mmBending radius> 10 x cable diameterMaterialPURColorblackNumber of cores5Core cross section0.8 mm2LengthL345 mm ± 5 mm: . Cable diameter: 7.25 mm ± 0.2 mm. Bending radius: > 10 x cable diameter. Material: PUR. Color: black. Number of cores: 5. Core cross section: 0.8 mm2. Length: 345 mm ± 5 mm. Mass: 245 g. Dimensions: . Height40 mmWidth40 mmLength40 mm: . Height: 40 mm. Width: 40 mm. Length: 40 mm. Output: near limit: 240 mm far limit: 4000 mm Output mode: rising ramp. Beam width: wide. Evaluation procedure: low-pass behavior. Supplementary information: Switch settings of the external programming adapter: "output load": pull-down "output logic": noninv

Specifications