Pepperl Fuchs UB100-F77-E2-2M
Request a Quote
Quick facts
| Availability | Confirmed on request |
| Category | Diffuse Mode and Retroreflective Sensors |
| Lifecycle | active |
| Warranty | 12-month (new) · 3-month (used/refurbished) |
Shipping & availability
When can UB100-F77-E2-2M be shipped?
UB100-F77-E2-2M is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up UB100-F77-E2-2M in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for UB100-F77-E2-2M and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for UB100-F77-E2-2M, subject to availability and destination.
Ultrasonic direct detection sensor. Ultrasonic direct detection sensor, Miniature design, Program input, Degree of protection IP67, Series: -F77, Rated operating voltage: 24 V DC, Operating voltage: 20 ... 30 V DC , ripple 10 %<sub>SS</sub> ; 12 ... 20 V DC sensitivity reduced to 90 %, Output type: 1 switch output PNP, NO, UL approval: cULus Listed, Class 2 Power Source, CCC approval: CCC approval / marking not required for products rated ≤36 V, Connection type: cable, Housing: Polycarbonate. Sensing range: 10 ... 100 mm. Adjustment range: 30 ... 100 mm. Dead band: 0 ... 10 mm. Standard target plate: 20 mm x 20 mm. Transducer frequency: approx. 400 kHz. Response delay: ≤ 50 ms. Permissible cable length: max. 300 m. LED yellow: switching state and flashing: Teach-In. Rated operating voltage: 24 V DC. Operating voltage: 20 ... 30 V DC , ripple 10 %SS ; 12 ... 20 V DC sensitivity reduced to 90 %. No-load supply current: ≤ 20 mA. Time delay before availability: ≤ 150 ms. Input type: 1 program input. Level: low level : 0 ... 0.7 V (Teach-In active) high level : UB or open input (Teach-In inactive). Input impedance: 16 kΩ. Pulse length: ≥ 3 s. Output type: 1 switch output PNP, NO. Rated operating current: 200 mA , short-circuit/overload protected. Voltage drop: ≤ 2 V. Repeat accuracy: ± 1 mm. Switching frequency: 10 Hz. Range hysteresis: typ. 2.5 mm. Off-state current: ≤ 0.01 mA. Temperature influence: 0.17 %/K. Standard conformity: . StandardsEN IEC 60947-5-2:2020 IEC 60947-5-2:2019: . Standards: EN IEC 60947-5-2:2020 IEC 60947-5-2:2019. UL approval: cULus Listed, Class 2 Power Source. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -10 ... 50 °C (14 ... 122 °F). Storage temperature: -40 ... 85 °C (-40 ... 185 °F). Shock resistance: 30 g , 11 ms period. Vibration resistance: 10 ... 55 Hz , Amplitude ± 1 mm. Connection type: cable. Degree of protection: IP67. Material: . HousingPolycarbonateTransducerepoxy resin/hollow glass sphere mixture; polyurethane foam: . Housing: Polycarbonate. Transducer: epoxy resin/hollow glass sphere mixture; polyurethane foam. Cable: . Connection assemblyflexible leads , Fine-stranded copperWire end ferrulesnoCable diameter3.9 mm ± 0.1 mmBending radius> 10 x cable diameterMaterialPURColorblackNumber of cores4Core cross section0.19 mm2LengthL2 m: . Connection assembly: flexible leads , Fine-stranded copper. Wire end ferrules: no. Cable diameter: 3.9 mm ± 0.1 mm. Bending radius: > 10 x cable diameter. Material: PUR. Color: black. Number of cores: 4. Core cross section: 0.19 mm2. Length: 2 m. Installation position: any position. Mass: 51 g. Tightening torque, fastening screws: max. 0.2 Nm. Dimensions: . Height31 mmWidth12 mmLength23 mm: . Height: 31 mm. Width: 12 mm. Length: 23 mm. Output: Switching point: 100 mm
Specifications
General specifications
| Sensing range | 10 ... 100 mm |
| Adjustment range | 30 ... 100 mm |
| Dead band | 0 ... 10 mm |
| Standard target plate | 20 mm x 20 mm |
| Transducer frequency | approx. 400 kHz |
| Response delay | ≤ 50 ms |
Limit data
| Permissible cable length | max. 300 m |
Indicators/operating means
| LED yellow | switching state and flashing: Teach-In |
Electrical specifications
| Rated operating voltage | 24 V DC Ue |
| Operating voltage | 20 ... 30 V DC , ripple 10 %SS ; 12 ... 20 V DC sensitivity reduced to 90 % UB |
| No-load supply current | ≤ 20 mA I0 |
| Time delay before availability | ≤ 150 ms tv |
Input
| Input type | 1 program input |
| Level | low level : 0 ... 0.7 V (Teach-In active) high level : UB or open input (Teach-In inactive) |
| Input impedance | 16 kΩ |
| Pulse length | ≥ 3 s |
Output
| Output type | 1 switch output PNP, NO |
| Rated operating current | 200 mA , short-circuit/overload protected Ie |
| Voltage drop | ≤ 2 V Ud |
| Repeat accuracy | ± 1 mm |
| Switching frequency | 10 Hz f |
| Range hysteresis | typ. 2.5 mm H |
| Off-state current | ≤ 0.01 mA Ir |
| Temperature influence | 0.17 %/K |
Compliance with standards and directives
| Standard conformity | |
| StandardsEN IEC 60947-5-2:2020 IEC 60947-5-2:2019 | Standards |
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
Approvals and certificates
| UL approval | cULus Listed, Class 2 Power Source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions
| Ambient temperature | -10 ... 50 °C (14 ... 122 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Shock resistance | 30 g , 11 ms period |
| Vibration resistance | 10 ... 55 Hz , Amplitude ± 1 mm |
Mechanical specifications
| Connection type | cable |
| Degree of protection | IP67 |
| Material | |
| HousingPolycarbonateTransducerepoxy resin/hollow glass sphere mixture; polyurethane foam | Housing |
| Housing | Polycarbonate |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam |
| Cable | |
| Connection assemblyflexible leads , Fine-stranded copperWire end ferrulesnoCable diameter3.9 mm ± 0.1 mmBending radius> 10 x cable diameterMaterialPURColorblackNumber of cores4Core cross section0.19 mm2LengthL2 m | Connection assembly |
| Connection assembly | flexible leads , Fine-stranded copper |
| Wire end ferrules | no |
| Cable diameter | 3.9 mm ± 0.1 mm |
| Bending radius | > 10 x cable diameter |
| Material | PUR |
| Color | black |
| Number of cores | 4 |
| Core cross section | 0.19 mm2 |
| Length | 2 m L |
| Installation position | any position |
| Mass | 51 g |
| Tightening torque, fastening screws | max. 0.2 Nm |
| Dimensions | |
| Height31 mmWidth12 mmLength23 mm | Height |
| Height | 31 mm |
| Width | 12 mm |
| Length | 23 mm |
Factory settings
| Output | Switching point: 100 mm |
More Pepperl Fuchs parts
NewPepperl + Fuchs KFD2-GUT-EX1.D New open box
Available on requestPepperl Fuchs V19-W-BK15M-PUR-U-V19-G
Available on requestPepperl Fuchs V1SD-G-GN65M-PUR-E1S-V45-G