Pepperl Fuchs NBN50-F135L-M18-20M-SET – Inductive Sensor Kit. Extended temperature range
Request a Quote
Quick facts
| Availability | Confirmed on request |
| Category | Inductive Sensors |
| Lifecycle | Active |
| Warranty | 12-month (new) · 3-month (used/refurbished) |
Shipping & availability
When can NBN50-F135L-M18-20M-SET be shipped?
NBN50-F135L-M18-20M-SET is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up NBN50-F135L-M18-20M-SET in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for NBN50-F135L-M18-20M-SET and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for NBN50-F135L-M18-20M-SET, subject to availability and destination.
Inductive Sensor Kit. Extended temperature range, Switching function: Normally open/closed (NO/NC) programmable, Output type: PNP, Installation: flush mountable, Output polarity: DC, Output type: 4-wire, Construction type: Rectangular, Series: Rectangular type, Type of voltage: DC, Interface type: IO-Link ( via C/Q = pin 4 ), Ambient temperature: Sensor head: 0 ... 250 °C (32 ... 482 °F)
amplifier: 0 ... 70 °C (32 ... 158 °F), Connection type: Connector plug, Degree of protection: Sensor head: IP65
amplifier: IP67. Switching function: Normally open/closed (NO/NC) programmable. Output type: PNP. Rated operating distance: 50 mm. Installation: flush mountable. Output polarity: DC. Assured operating distance: 0 ... 40.5 mm. Actuating element: Steel Fe360 , 150 mm x 150 mm x 1 mm. Reduction factor rAl: 0.6. Reduction factor rCu: 0.5. Reduction factor r304: 1. Reduction factor rBrass: 0.9. Output type: 4-wire. Operating voltage: 10 ... 30 V. Switching frequency: 0 ... 30 Hz. Hysteresis: typ. 5 %. Reverse polarity protection: reverse polarity protected. Short-circuit protection: pulsing. Voltage drop: ≤ 3 V. Operating current: 0 ... 200 mA. Off-state current: 0 ... 0.5 mA typ. 0.1 µA. No-load supply current: ≤ 40 mA. Power consumption: ≤ 420 mW. Time delay before availability: ≤ 300 ms. Status indicator: Dual color-LED, yellow/green SIO mode: yellow = switching stategreen = power supply on IO-Link mode: see manual. Interface type: IO-Link ( via C/Q = pin 4 ). IO-Link revision: 1.1. Device profile: Identification and Diagnosis - I&D Smart Sensor - SSP 1.1. Process data: Input 5 Bit - switching signal 1 Bit - uncertainty indication 1 Bit - status signal 1 Bit - maintenance warning 1 Bit. Vendor ID: 1 (0x0001). Device ID: 2098689 (0x200601). Transfer rate: COM2 (38.4 kBit/s). Min. cycle time: 2.3 ms. SIO mode support: yes. Compatible master port type: Class A Class B (use 3-pole adapter or 3-wire cable). Designation: Sync. Input/output type: 1 synchronization connection, bidirectional. PWIS conformity: VDMA24364-B1/B2/C1/T220°C-W. Standard conformity: . StandardsEN IEC 60947-5-2Communication interfaceIEC 61131-9 / IO-Link V1.1.3: . Standards: EN IEC 60947-5-2. Communication interface: IEC 61131-9 / IO-Link V1.1.3. Protection class: III. Rated insulation voltageUi36 VRated impulse withstand voltageUimp500 V: Ui. Rated insulation voltage: 36 V. Rated impulse withstand voltage: 500 V. UL approval: cULus Listed, General Purpose, Class 2 Power Source. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: Sensor head: 0 ... 250 °C (32 ... 482 °F) amplifier: 0 ... 70 °C (32 ... 158 °F). Storage temperature: 0 ... 70 °C (32 ... 158 °F). Vibration resistance: 30 g. Connection type: Connector plug. Degree of protection: Sensor head: IP65 amplifier: IP67. Material: . HousingSensor head: PEEK 450, 30% fibre glass amplifier: Stainless steel 1.4305 / AISI 303Mounting materialsMounting bracket made of aluminum 3.3206: . Housing: Sensor head: PEEK 450, 30% fibre glass amplifier: Stainless steel 1.4305 / AISI 303. Mounting materials: Mounting bracket made of aluminum 3.3206. Connector: . ThreadingM12 x 1Number of pins4Connection assemblyadditional M8 plug connector on the sensor head side: . Threading: M12 x 1. Number of pins: 4. Connection assembly: additional M8 plug connector on the sensor head side. Cable: . Cable diameter3.9 mmBending radiusfixed installation 7.5 x cable diameter movable installation 15 x cable diameterMaterialPFAColorblackNumber of cores3Core cross section0.34 mm2ShieldgridLengthL20 m: . Cable diameter: 3.9 mm. Bending radius: fixed installation 7.5 x cable diameter movable installation 15 x cable diameter. Material: PFA. Color: black. Number of cores: 3. Core cross section: 0.34 mm2. Shield: grid. Length: 20 m. Mass: 1141 g. Dimensions: . Height69 mm Sensor headWidth65 mm Sensor headLength74 mm Sensor head: . Height: 69 mm Sensor head. Width: 65 mm Sensor head. Length: 74 mm Sensor head. Mounting: amplifier: nuts, M18. Tightening torque: ≤ 30 Nm. Default setting: PNP, NO. Scope of delivery: 2 self locking nuts in scope of delivery
Specifications
General specifications
| Switching function | Normally open/closed (NO/NC) programmable |
| Output type | PNP |
| Rated operating distance | 50 mm sn |
| Installation | flush mountable |
| Output polarity | DC |
| Assured operating distance | 0 ... 40.5 mm sa |
| Actuating element | Steel Fe360 , 150 mm x 150 mm x 1 mm |
| Reduction factor rAl | 0.6 |
| Reduction factor rCu | 0.5 |
| Reduction factor r304 | 1 |
| Reduction factor rBrass | 0.9 |
| Output type | 4-wire |
Nominal ratings
| Operating voltage | 10 ... 30 V UB |
| Switching frequency | 0 ... 30 Hz f |
| Hysteresis | typ. 5 % H |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| Voltage drop | ≤ 3 V Ud |
| Operating current | 0 ... 200 mA IL |
| Off-state current | 0 ... 0.5 mA typ. 0.1 µA Ir |
| No-load supply current | ≤ 40 mA I0 |
| Power consumption | ≤ 420 mW P |
| Time delay before availability | ≤ 300 ms tv |
| Status indicator | Dual color-LED, yellow/green SIO mode: yellow = switching stategreen = power supply on IO-Link mode: see manual |
Interface
| Interface type | IO-Link ( via C/Q = pin 4 ) |
| IO-Link revision | 1.1 |
| Device profile | Identification and Diagnosis - I&D Smart Sensor - SSP 1.1 |
| Process data | Input 5 Bit - switching signal 1 Bit - uncertainty indication 1 Bit - status signal 1 Bit - maintenance warning 1 Bit |
| Vendor ID | 1 (0x0001) |
| Device ID | 2098689 (0x200601) |
| Transfer rate | COM2 (38.4 kBit/s) |
| Min. cycle time | 2.3 ms |
| SIO mode support | yes |
| Compatible master port type | Class A Class B (use 3-pole adapter or 3-wire cable) |
Input/Output
| Designation | Sync |
| Input/output type | 1 synchronization connection, bidirectional |
Conformity
| PWIS conformity | VDMA24364-B1/B2/C1/T220°C-W |
Compliance with standards and directives
| Standard conformity | |
| StandardsEN IEC 60947-5-2Communication interfaceIEC 61131-9 / IO-Link V1.1.3 | Standards |
| Standards | EN IEC 60947-5-2 |
| Communication interface | IEC 61131-9 / IO-Link V1.1.3 |
Approvals and certificates
| Protection class | III |
| Rated insulation voltageUi36 VRated impulse withstand voltageUimp500 V | Ui Rated insulation voltage |
| Rated insulation voltage | 36 V Ui |
| Rated impulse withstand voltage | 500 V Uimp |
| UL approval | cULus Listed, General Purpose, Class 2 Power Source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions
| Ambient temperature | Sensor head: 0 ... 250 °C (32 ... 482 °F) amplifier: 0 ... 70 °C (32 ... 158 °F) |
| Storage temperature | 0 ... 70 °C (32 ... 158 °F) |
| Vibration resistance | 30 g |
Mechanical specifications
| Connection type | Connector plug |
| Degree of protection | Sensor head: IP65 amplifier: IP67 |
| Material | |
| HousingSensor head: PEEK 450, 30% fibre glass amplifier: Stainless steel 1.4305 / AISI 303Mounting materialsMounting bracket made of aluminum 3.3206 | Housing |
| Housing | Sensor head: PEEK 450, 30% fibre glass amplifier: Stainless steel 1.4305 / AISI 303 |
| Mounting materials | Mounting bracket made of aluminum 3.3206 |
| Connector | |
| ThreadingM12 x 1Number of pins4Connection assemblyadditional M8 plug connector on the sensor head side | Threading |
| Threading | M12 x 1 |
| Number of pins | 4 |
| Connection assembly | additional M8 plug connector on the sensor head side |
| Cable | |
| Cable diameter3.9 mmBending radiusfixed installation 7.5 x cable diameter movable installation 15 x cable diameterMaterialPFAColorblackNumber of cores3Core cross section0.34 mm2ShieldgridLengthL20 m | Cable diameter |
| Cable diameter | 3.9 mm |
| Bending radius | fixed installation 7.5 x cable diameter movable installation 15 x cable diameter |
| Material | PFA |
| Color | black |
| Number of cores | 3 |
| Core cross section | 0.34 mm2 |
| Shield | grid |
| Length | 20 m L |
| Mass | 1141 g |
| Dimensions | |
| Height69 mm Sensor headWidth65 mm Sensor headLength74 mm Sensor head | Height |
| Height | 69 mm Sensor head |
| Width | 65 mm Sensor head |
| Length | 74 mm Sensor head |
| Mounting | amplifier: nuts, M18 |
| Tightening torque | ≤ 30 Nm |
Factory settings
| Default setting | PNP, NO |
General information
| Scope of delivery | 2 self locking nuts in scope of delivery |
More Pepperl Fuchs parts
Available on requestPepperl Fuchs NBN50-F135L-L4-M18-5M-SET – Inductive Sensor Kit. Extended temperature range
Available on requestPepperl Fuchs NBN50-F135L-M18-10M-SET – Inductive Sensor Kit. Extended temperature range
Available on requestPepperl Fuchs NBN50-F135L-M18-15M-SET – Inductive Sensor Kit. Extended temperature range
Available on requestPepperl Fuchs NBN50-F135L-M18-1M-SET – Inductive Sensor Kit. Extended temperature range
Available on requestPepperl Fuchs NBN50-F135L-M18-25M-SET – Inductive Sensor Kit. Extended temperature range
Available on requestPepperl Fuchs NBN50-F135L-M18-30M-SET – Inductive Sensor Kit. Extended temperature range
Available on requestPepperl Fuchs NBN50-F135L-M18-5M-SET – Inductive Sensor Kit. Extended temperature range
Available on requestPepperl Fuchs NBN50-L2K-A0-V1