Pepperl Fuchs NAN30-L2-U-V1
Request a Quote
Quick facts
| Availability | Confirmed on request |
| Category | Inductive Sensors |
| Lifecycle | active |
| Warranty | 12-month (new) · 3-month (used/refurbished) |
Shipping & availability
When can NAN30-L2-U-V1 be shipped?
NAN30-L2-U-V1 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up NAN30-L2-U-V1 in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for NAN30-L2-U-V1 and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for NAN30-L2-U-V1, subject to availability and destination.
Inductive sensor. Output type: Analog voltage output, Installation: non-flush, Output polarity: DC, Output type: 3-wire, Construction type: <i>VariKont L</i> <sup>®</sup>, Series: <i>VariKont L</i> <sup>®</sup>, Type of voltage: DC, Connection type: Connector plug, Housing material: PA, Degree of protection: IP65 / IP67, Threading: M12 x 1. Output type: Analog voltage output. Installation: non-flush. Output polarity: DC. Actuating element: mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 90 mm x 90 mm x 1 mm. Measuring range: 0 ... 30 mm. Output type: 3-wire. Operating voltage: 15 ... 30 V. Reverse polarity protection: reverse polarity protected. Short-circuit protection: current limited. Linearity error: ± 3 % of full-scale value. Temperature drift: ± 10 % of full-scale value. Repeat accuracy: ± 1 % of full-scale value. Recovery time: ≤ 50 ms. No-load supply current: 12 mA. Operating voltage indicator: LED, green. Status indicator: LED, yellow permanently on: damping element within measuring range slowly flashing (2 Hz): damping element outside measuring range fast flashing (10 Hz): fault state. MTTFd: 854 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Output type: 0 ... 10 V. Slope of output characteristic: 0.3 mA / mm. Load resistor: ≥ 500 Ω. Settling time: ≤ 100 ms. PWIS conformity: VDMA 24364-A1/B2/C1/T100°C-W. Standard conformity: . StandardsEN IEC 60947-5-2: . Standards: EN IEC 60947-5-2. Protection class: II. Rated insulation voltageUi30 VRated impulse withstand voltageUimp500 V: Ui. Rated insulation voltage: 30 V. Rated impulse withstand voltage: 500 V. UL approval: cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -25 ... 70 °C (-13 ... 158 °F). Storage temperature: -40 ... 85 °C (-40 ... 185 °F). Connection type: Connector plug. Housing material: PA. Sensing face: PA. Degree of protection: IP65 / IP67. Connector: . ThreadingM12 x 1Number of pins4: . Threading: M12 x 1. Number of pins: 4. Mass: 145 g. Dimensions: . Height40 mmWidth40 mmLength67 mm: . Height: 40 mm. Width: 40 mm. Length: 67 mm
Specifications
General specifications
| Output type | Analog voltage output |
| Installation | non-flush |
| Output polarity | DC |
| Actuating element | mild steel, e. g. 1.0037, SR235JR (formerly St37-2) 90 mm x 90 mm x 1 mm |
| Measuring range | 0 ... 30 mm |
| Output type | 3-wire |
Nominal ratings
| Operating voltage | 15 ... 30 V UB |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | current limited |
| Linearity error | ± 3 % of full-scale value |
| Temperature drift | ± 10 % of full-scale value |
| Repeat accuracy | ± 1 % of full-scale value |
| Recovery time | ≤ 50 ms |
| No-load supply current | 12 mA I0 |
| Operating voltage indicator | LED, green |
| Status indicator | LED, yellow permanently on: damping element within measuring range slowly flashing (2 Hz): damping element outside measuring range fast flashing (10 Hz): fault state |
Functional safety related parameters
| MTTFd | 854 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
Analog output
| Output type | 0 ... 10 V |
| Slope of output characteristic | 0.3 mA / mm |
| Load resistor | ≥ 500 Ω |
| Settling time | ≤ 100 ms |
Conformity
| PWIS conformity | VDMA 24364-A1/B2/C1/T100°C-W |
Compliance with standards and directives
| Standard conformity | |
| StandardsEN IEC 60947-5-2 | Standards |
| Standards | EN IEC 60947-5-2 |
Approvals and certificates
| Protection class | II |
| Rated insulation voltageUi30 VRated impulse withstand voltageUimp500 V | Ui Rated insulation voltage |
| Rated insulation voltage | 30 V Ui |
| Rated impulse withstand voltage | 500 V Uimp |
| UL approval | cULus Listed Load Type: General Purpose Circuitry: Class 2 Power Source Enclosure Type Rating: Type 1 Supply/Switching Voltage: 30 V DC |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Mechanical specifications
| Connection type | Connector plug |
| Housing material | PA |
| Sensing face | PA |
| Degree of protection | IP65 / IP67 |
| Connector | |
| ThreadingM12 x 1Number of pins4 | Threading |
| Threading | M12 x 1 |
| Number of pins | 4 |
| Mass | 145 g |
| Dimensions | |
| Height40 mmWidth40 mmLength67 mm | Height |
| Height | 40 mm |
| Width | 40 mm |
| Length | 67 mm |
More Pepperl Fuchs parts
NewPepperl + Fuchs KFD2-GUT-EX1.D New open box
Available on requestPepperl Fuchs V19-W-BK15M-PUR-U-V19-G
Available on requestPepperl Fuchs V1SD-G-GN65M-PUR-E1S-V45-G