Pepperl Fuchs MLV12-54/32/82b/124

Retroreflective sensor. Robust retroreflective sensor for complex applications, small design, polarization filter, 9 m detection range, red light, light/dark on, PNP output, stability alarm output, M12 plug, Robust photoelectric sensor series in a widely used standard housing, Resistant against noise: reliable operation under all conditions, Clear and functional display concept for the operating modes, High level of stability thanks to the metal housing frame, Tightly sealed thanks to welded plastic components. Effective detection range: 0 ... 6.5 m. Reflector distance: 0.01 ... 6.5 m. Threshold detection range: 9 m. Reference target: H85-2 reflector. Light source: LED. Light type: modulated visible red light , 660 nm. Polarization filter: yes. Diameter of the light spot: approx. 170 mm at detection range 6.5 m. Opening angle: 1.5 °. Ambient light limit: . Continuous light50000 LuxModulated light5000 Lux: . Continuous light: 50000 Lux. Modulated light: 5000 Lux. MTTFd: 1000 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green, flashes in case of short-circuit. Function indicator: 2 LEDs yellow, light up when light beam is free, flash when falling short of the operating reserve, are off when light beam is interrupted. Control elements: rotary switch for light/dark, sensitivity adjuster. Operating voltage: 10 ... 30 V DC. Ripple: max. 10 %. No-load supply current: max. 40 mA. Stability alarm output: 1 PNP, inactive when level falls below operating reserve after approx. 5 s.Immediately inactive if the beam is interrupted 4 times during the flashtime.. Switching type: light/dark on switchable. Signal output: 1 PNP output, short-circuit protected, reverse polarity protected, open collector. Switching voltage: max. 30 V DC. Switching current: max. 0.2 A. Voltage drop: ≤ 2.5 V DC. Switching frequency: 1000 Hz. Response time: 0.5 ms. Product standard: EN 60947-5-2. Standard conformity: . Shock and impact resistanceIEC / EN 60068. half-sine, 40 g in each X, Y and Z directionsVibration resistanceIEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions: . Shock and impact resistance: IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions. Vibration resistance: IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions. Protection class: II, rated voltage ≤ 300 V AC with pollution degree 1-2 according to IEC 60664-1. UL approval: cULus. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -40 ... 60 °C (-40 ... 140 °F). Storage temperature: -40 ... 75 °C (-40 ... 167 °F). Degree of protection: IP67. Connection: Metal connector, M12, 5-pin, 90° rotatable. Material: . HousingFrame: nickel plated, die cast zinc, Laterals: glass-fiber reinforced plastic PCOptical facePlastic pane: . Housing: Frame: nickel plated, die cast zinc, Laterals: glass-fiber reinforced plastic PC. Optical face: Plastic pane. Mass: 60 g. Dimensions: . Height49 mmWidth41.5 mmDepth15 mm: . Height: 49 mm. Width: 41.5 mm. Depth: 15 mm

Specifications