Pepperl Fuchs MLV12-54-LAS/76b/95/110

Retroreflective sensor. Laser retroreflective sensor, small design, polarization filter, 21 m detection range, laser red light, light/dark on, push-pull output, test input, M8 plug, Series of sensors in a widely used standard housing, Visible red light, pulsed LASER light, Precision: high degree of repeatability thanks to small light spot, Objects can be reliably detected down to 0 mm: no blind zone, Resistant against noise: reliable operation under all conditions. Effective detection range: 0 ... 12 m. Reflector distance: 0 ... 12 m. Threshold detection range: 17 m. Reference target: MH82 reflector. Light source: laser diode. Light type: modulated visible red light. Polarization filter: yes. Laser nominal ratings: . NoteLASER LIGHT , DO NOT STARE INTO BEAMLaser class1Wave length650 nmBeam divergence< 1.5 mradPulse length1.8 µsRepetition rate17.86 kHzmax. pulse energy6.7 nJ: . Note: LASER LIGHT , DO NOT STARE INTO BEAM. Laser class: 1. Wave length: 650 nm. Beam divergence: < 1.5 mrad. Pulse length: 1.8 µs. Repetition rate: 17.86 kHz. max. pulse energy: 6.7 nJ. Diameter of the light spot: approx. 5 mm x 12 mm at 15 m detection range. Opening angle: 0.02 °. Ambient light limit: . Continuous light50000 LuxModulated light5000 Lux: . Continuous light: 50000 Lux. Modulated light: 5000 Lux. MTTFd: 930 a. Mission Time (TM): 10 a. Diagnostic Coverage (DC): 90 %. Operation indicator: LED green, flashes in case of short-circuit. Function indicator: 2 LEDs yellow, light up when light beam is free, flash when falling short of the operating reserve, are off when light beam is interrupted. Control elements: rotary switch for light/dark, sensitivity adjuster. Operating voltage: 10 ... 30 V DC. Ripple: max. 10 %. No-load supply current: max. 40 mA. Test input: emitter deactivation at 0 V. Switching type: light/dark on switchable. Signal output: 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected. Switching voltage: max. 30 V DC. Switching current: max. 0.1 A. Voltage drop: ≤ 2.5 V DC. Switching frequency: 2500 Hz. Response time: 0.2 ms. Product standard: EN 60947-5-2. Laser safety: IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. Standard conformity: . Shock and impact resistanceIEC / EN 60068. half-sine, 40 g in each X, Y and Z directionsVibration resistanceIEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directionsLaser classIEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007: . Shock and impact resistance: IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions. Vibration resistance: IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions. Laser class: IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. EAC conformity: TR CU 020/2011. UL approval: cULus Listed, Type 1 enclosure. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: -10 ... 50 °C (14 ... 122 °F). Storage temperature: -20 ... 65 °C (-4 ... 149 °F). Degree of protection: IP67. Connection: 4-pin M8 metal connector, 90° rotatable. Material: . HousingFrame: nickel plated, die cast zinc, Laterals: glass-fiber reinforced plastic PCOptical facePlastic pane: . Housing: Frame: nickel plated, die cast zinc, Laterals: glass-fiber reinforced plastic PC. Optical face: Plastic pane. Mass: 60 g. Dimensions: . Height49 mmWidth41.5 mmDepth15 mm: . Height: 49 mm. Width: 41.5 mm. Depth: 15 mm

Specifications