Pepperl Fuchs HiC2853R2

Switch Amplifier. 1-channel isolated barrier, 24 V DC supply (bus powered), Input for approved dry contacts or SN/S1N sensors, Usable as signal splitter (1 input and 2 outputs), Application-specific outputs, Active voltage output, Passive transistor output (resistive), Line fault detection (LFD), Line fault transparency (LFT), Up to SIL 3 acc. to IEC/EN 61508, Housing width: 12.5 mm, Number of channels: 1-channel, Line fault transparency, Safety Integrity Level (SIL): SIL 3, Systematic capability (SC): SC 3. Signal type: Digital Input. Safety Integrity Level (SIL): SIL 3. Systematic capability (SC): SC 3. Connection: SL1: 1a(-), 1b(-); 2a(+), 2b(+). Rated voltage: 19 ... 30 V DC bus powered via Termination Board. Ripple: ≤ 10 %. Rated current: ≤ 55 mA. Power dissipation: ≤ 800 mW. Power consumption: ≤ 1300 mW. Connection side: field side. Connection: SL2: 5a(+), 5b(-). Open circuit voltage/short-circuit current: approx. 8.4 V DC / approx. 11.9 mA. Switching point/switching hysteresis: 2.1 ... 2.8 mA / approx. 0.3 mA. Line fault detection: breakage I ≤ 0.15 mA , short-circuit I ≥ 8.5 mA. Lead resistance: max. 50 Ω , consider capacitances and inductances. Switching point: 1-signal: I > 2.8 mA0-signal: I < 2.1 mA. Response delay: ≤ 1 ms. Connection side: control side. Connection: SL1: 8a(+), 7a(-); 10a(+), 9a(-). Rated voltage: output I: 19 ... 30 V DC. Output I: passive transistor output (resistive) 0-signal: 15 kΩ ± 5 %1-signal: 5 kΩ ± 5 % fault: > 100 kΩ. Output II: active voltage output, short-circuit proof 0-signal: 0 V1-signal: 20 ... 31 V DC at max. 15 mA fault: 0 V. Connection: SL1: 6b. Output type: open collector transistor (internal fault bus). Switching frequency: . Output I≤ 50 HzOutput II≤ 50 Hz: . Output I: ≤ 50 Hz. Output II: ≤ 50 Hz. Output/power supply: functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff. Output/Output: functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff. Display elements: LEDs. Labeling: space for labeling at the front. Electromagnetic compatibility: . Directive 2014/30/EUEN 61326-1:2013 (industrial locations): . Directive 2014/30/EU: EN 61326-1:2013 (industrial locations). Electromagnetic compatibility: EN IEC 61326-3-2:2018 , NE 21:2017For further information see system description.. Degree of protection: IEC 60529:2001. Ambient temperature: -20 ... 60 °C (-4 ... 140 °F). Degree of protection: IP20. Mass: approx. 105 g. Dimensions: 12.5 x 106 x 128 mm (0.5 x 4.2 x 5.1 inch) (W x H x D). Height106 mmWidth12.5 mmDepth128 mm: . Height: 106 mm. Width: 12.5 mm. Depth: 128 mm. Mounting: on termination board. Coding: pin 1 and 2 trimmed For further information see system description.. EU-type examination certificate: BASEEFA 07 ATEX 0302X. Marking II (1)G [Ex ia] IIC , [exsign] II (1) D [Ex ia] IIIC , [exsign] I (M1) [Ex ia] IInputEx iaVoltageUo10.5 VCurrentIo17.1 mAPowerPo45 mW (linear characteristic): . Marking: II (1)G [Ex ia] IIC , [exsign] II (1) D [Ex ia] IIIC , [exsign] I (M1) [Ex ia] I. Input: Ex ia. Voltage: 10.5 V. Current: 17.1 mA. Power: 45 mW (linear characteristic). Supply: . Maximum safe voltageUm253 V AC (Attention! Um is no rated voltage.): Um. Maximum safe voltage: 253 V AC (Attention! Um is no rated voltage.). Output: . Maximum safe voltageUm253 V AC (Attention! Um is no rated voltage.): Um. Maximum safe voltage: 253 V AC (Attention! Um is no rated voltage.). Certificate: PF 09 CERT 1440 X. Marking II 3G Ex nA IIC T4 Gc: . Marking: II 3G Ex nA IIC T4 Gc. Galvanic isolation: . Input/Outputsafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 VInput/power supplysafe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V: . Input/Output: safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V. Input/power supply: safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V. Directive conformity: . Directive 2014/34/EUEN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010: . Directive 2014/34/EU: EN IEC 60079-0:2018+AC:2020 , EN 60079-11:2012 , EN 60079-15:2010. UL approval: E106378. Control drawing116-0364: . Control drawing: 116-0364. IECEx approval: . IECEx certificateIECEx BAS 07.0097XIECEx marking[Ex ia Ga] IIC, [Ex ia] IIIC , [Ex ia] I: . IECEx certificate: IECEx BAS 07.0097X. IECEx marking: [Ex ia Ga] IIC, [Ex ia] IIIC , [Ex ia] I. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Specifications