ANALOG INPUT MODULE XI322204
見積もりを依頼する
基本情報
| 在庫状況 | お問い合わせにより確認 |
| カテゴリー | XI3 Analog Inputs |
| ライフサイクル | active |
| 保証 | 12か月（新品）・3か月（中古・整備済み） |
配送・在庫状況
R911406104はいつ発送できますか？
R911406104はお問い合わせにより調達いたします — 見積もりを依頼いただければ、この個体の正確な在庫状況と配送スケジュールをご案内いたします。
R911406104を直接引き取ることはできますか？
オランダ・フローニンゲンの当社倉庫での引き取りが可能な場合があります — ご注文前にお問い合わせいただき、在庫状況と引き取り日時をご確認ください。
エクスプレス配送は利用できますか？
はい — R911406104の見積もり依頼時にその旨をお知らせいただければ、返信にエクスプレス配送のオプションを含めてご案内いたします。
工場が停止しており緊急で必要です — 対応可能ですか？
重大な故障の場合は、+31 (0)50-7110348またはsales@partnerplc.comまで直接ご連絡ください — R911406104について、在庫状況と配送先に応じて即日クーリエまたは専用タクシー・ホットショット配送を検討いたします。
The analog input module XI322204 processes signals in the range from -10 V to +10 V in a ctrlX I/O station. The input signal is digitized with a resolution of 16 bits and transferred galvanically isolated to the system level. The 4 input channels are differential inputs.<br><br>Error states are shown at the channel LED on the removable peripheral connector and routed to the control via the local bus.<br><br>The logic and peripheral voltage supply as well as the EtherCAT-based module communication are routed through the module.
仕様
Specifications
| Connection type | Push-in |
| Connectivity technology | 2-wire technique, shielded, twisted in pairs |
| Number of channels | 4 |
| Voltage supply | UP via jumper contacts |
| Width [mm] | 12 |
| Height [mm] | 105 |
| Depth [mm] | 99 |
| International protection code | IP20 |
| Protection class | III |
| Backplane-Bus | Standard-EtherCAT über LVDS |
| Resolution A/D | 16 Bit |
| EMC resistance | EN 61000-6-2 and EN 61000-6-4 |
| Accuracy | typ. ± 0.1 % of full scale value (FSV); Max. ± 0.3 % of FSV |
| Bit width, input data in the process data image (including fill bits) | 18 bytes in the standard representation 12 bytes in the "compact" representation (Can be set channel-granularly) |
| Limit frequency of input filter [kHz] | 12.8 |
| A/D conversion time | 100 µs |
| Maximum power dissipation in the module [W] | 1.5 |
| Channel LEDs | Dedicated LED per channel |
| Input resistance [kΩ] | >250 |
| Post-assembly position | Vertical, on a horizontal support rail |
| Electrical isolation | 1200 V DC UP to UL, 707 V DC UP/UL to FE, both tested for 60 s;(not evaluated by UL) |
| Maximum common mode vs. UpGND | Max. ±35 V compared to UPGND |
| Current requirement UL | 40 mA |
| Current requirement Up | 20 mA |
| Nominal voltage (UL/UP) | DC 24 V (19.2 V to 30 V, including tolerance and residual ripple) PELV/SELV (safety extra-low voltage) |
| Overvoltage category | 2 |
| Input signal | -10-10 V |
| Signal type | Differential |
| Conductor cross-section | AWG: 24 ... 16; Flexible: 0.2-1.5 mm²; rigid: 0.2-1.5 mm² |
| Overload protection | No, DC 30 V max. |
| Permissible air humidity (storage) [%] | 10-95 |
| Permissible air humidity (transport) [%] | 10-95 |
| Ambient temperature (storage and transport) [°C] | -40-70 |
| Ambient temperature during operation | 2,000 m to 3,000 m: -25 °C to +40 °C; Up to 2000 m: -25°C to +45°C |
| Maximum operating altitude [m] | 5000 |
| Contamination level | 2, no condensation |
| Weight [kg] | 0.12 |
Bosch Rexrothの他の部品
中古Rexroth HCS03.1E-W0150-A-05-NNBV Used
中古Rexroth HCS01.1E-W0009 -A-02-B-ET-EC- NN-L4-NN-FW Used