DIGITAL OUTPUT MODULE XI211116
Solicitar presupuesto
Datos rápidos
| Disponibilidad | Confirmación bajo consulta |
| Categoría | XI2 Digital Outputs |
| Ciclo de vida | active |
| Garantía | 12 meses (nuevo) · 3 meses (usado/reacondicionado) |
Envío y disponibilidad
¿Cuándo se puede enviar R911406102?
R911406102 se abastece bajo pedido — solicite un presupuesto y confirmaremos la disponibilidad exacta y el plazo de entrega para esta unidad concreta.
¿Puedo recoger R911406102 en persona?
Es posible recoger el pedido en nuestro almacén de Groningen, Países Bajos — contáctenos antes de realizar el pedido para confirmar disponibilidad y acordar un horario de recogida.
¿Está disponible el envío exprés?
Sí — menciónelo al solicitar un presupuesto para R911406102 e incluiremos las opciones de envío exprés en nuestra respuesta.
Nuestra planta está parada y lo necesitamos urgentemente — ¿pueden ayudar?
Ante una avería crítica, contáctenos directamente al +31 (0)50-7110348 o a sales@partnerplc.com — estudiaremos un envío urgente el mismo día o un transporte dedicado para R911406102, según disponibilidad y destino.
The digital output module XI211116 is used to output binary 24 V control signals in a ctrlX I/O station. The module has 16 channels in a 1-wire technique. The signal state is shown at the channel LED on the removable peripheral connector.<br><br>The digital outputs are supplied from the peripheral supply voltage UP.<br><br>The logic and peripheral voltage supply as well as the EtherCAT-based module communication are routed through the module.
Especificaciones
Specifications
| Connection type | Push-in |
| Connectivity technology | 1-wire technique |
| Number of channels | 16 |
| Max. output current per channel [A] | 0.5 |
| Width [mm] | 12 |
| Height [mm] | 105 |
| Depth [mm] | 99 |
| International protection code | IP20 |
| Protection class | III |
| Backplane-Bus | Standard-EtherCAT über LVDS |
| EMC resistance | EN 61000-6-2 and EN 61000-6-4 |
| Bit width, output data in the process data image | 2 bytes (16 bits) |
| Maximum current fed into one GND Output Pin [A] | 1 |
| Maximum current fed into all GND Output Pins of the module [A] | 4 |
| Maximum power dissipation in the module [W] | 2.25 |
| Inductive switch-off energy | Max. 150 mJ |
| Nominal load [Ohm] | 48 |
| Channel LEDs | Per channel |
| Post-assembly position | Vertical, on a horizontal support rail |
| Electrical isolation | 1200 V DC UP to UL, 707 V DC UP/UL to FE, both tested for 60 s;(not evaluated by UL) |
| Rise time (TRise) | Without load: 8,3 µs on the digital input; 8,5 µs at 240 Ohm, 100 mA; Ohmic nominal load: 10 µs at 48 Ohm, 500mA |
| Fall time (TFALL) | Without load: 1,4 µs on the digital input; 50 µs at 240 Ohm, 100 mA; Ohmic nominal load: 11 µs at 48 Ohm, 500mA |
| Feedback voltage resistance | Not resistant to feedback, external measures required |
| Current requirement UL | 35 mA |
| Current requirement Up | 30 mA + load |
| Net current module outputs [A] | 4 |
| Nominal voltage (UL/UP) | DC 24 V (19.2 V to 30 V, including tolerance and residual ripple) PELV/SELV (safety extra-low voltage) |
| Overvoltage category | 2 |
| Nominal output voltage [V DC] | 24 |
| Conductor cross-section | AWG: 24 ... 16; Flexible: 0.2-1.5 mm²; rigid: 0.2-1.5 mm² |
| Overload protection | Granular switch-off with automatic restart |
| Permissible air humidity (storage) [%] | 10-95 |
| Permissible air humidity (transport) [%] | 10-95 |
| Ambient temperature (storage and transport) [°C] | -40-70 |
| Ambient temperature during operation | 2,000 m to 3,000 m: -25 °C to +50 °C; 3,000 m to 4,000 m: -25 °C to +45 °C; 4,000 m to 5,000 m: -25 °C to +40 °C; Up to 2,000 m: -25 °C to +55 °C |
| Maximum operating altitude [m] | 5000 |
| Contamination level | 2, no condensation |
| Weight [kg] | 0.13 |
Más piezas Bosch Rexroth
UsadoRexroth HCS03.1E-W0150-A-05-NNBV Used
UsadoRexroth HCS01.1E-W0009 -A-02-B-ET-EC- NN-L4-NN-FW Used