INTERFACE MODULE XI812101
Solicitar presupuesto
Datos rápidos
| Disponibilidad | Confirmación bajo consulta |
| Categoría | XI8 System Modules |
| Ciclo de vida | active |
| Garantía | 12 meses (nuevo) · 3 meses (usado/reacondicionado) |
Envío y disponibilidad
¿Cuándo se puede enviar R911406094?
R911406094 se abastece bajo pedido — solicite un presupuesto y confirmaremos la disponibilidad exacta y el plazo de entrega para esta unidad concreta.
¿Puedo recoger R911406094 en persona?
Es posible recoger el pedido en nuestro almacén de Groningen, Países Bajos — contáctenos antes de realizar el pedido para confirmar disponibilidad y acordar un horario de recogida.
¿Está disponible el envío exprés?
Sí — menciónelo al solicitar un presupuesto para R911406094 e incluiremos las opciones de envío exprés en nuestra respuesta.
Nuestra planta está parada y lo necesitamos urgentemente — ¿pueden ayudar?
Ante una avería crítica, contáctenos directamente al +31 (0)50-7110348 o a sales@partnerplc.com — estudiaremos un envío urgente el mismo día o un transporte dedicado para R911406094, según disponibilidad y destino.
The active power feeding XI812101 is used to feed in the peripheral circuitry again (UP) in a ctrlX I/O station. It supplies the connected I/O modules with the peripheral voltage (UP) of DC 24 V, 8 A, which is internally galvanically isolated from the peripheral voltage supply of the preceding modules. The voltage and the current fed in are measured internally and applied to the process data. The logic voltage supply as well as the EtherCAT-based module communication are routed through the module.
Especificaciones
Specifications
| Connection type | Push-in |
| Width [mm] | 20 |
| Height [mm] | 105 |
| Depth [mm] | 99 |
| International protection code | IP20 |
| Protection class | III |
| Backplane-Bus | Standard-EtherCAT über LVDS |
| EMC resistance | EN 61000-6-2 and EN 61000-6-4 |
| Bit width, input data in the process data image (including fill bits) | 6 bytes |
| Maximum power dissipation in the module [W] | 2.64 |
| Inverse polarity protection up to [V] | 50 |
| Channel LEDs | Display status of Power supply |
| Post-assembly position | Vertical, on a horizontal support rail |
| Electrical isolation | 1200 V DC UP to UL, 707 V DC UP/UL to FE, both tested for 60 s;(not evaluated by UL) |
| Fuse protection (UP) | No internal fuse protection. The operator has to provide protection against overload by an external fuse. |
| Transient protection | Present, suppressor diodes, pulse load up to 1500 W |
| Maximum number of modules per station | 30 |
| Current requirement UL | 40 mA |
| Current requirement Up | Typ. 7 mA (without I/O modules), 8 A max. (complete system with I/O modules) |
| Nominal voltage (UL/UP) | DC 24 V (19.2 V to 30 V, including tolerance and residual ripple) PELV/SELV (safety extra-low voltage) |
| Overvoltage category | 2 |
| Voltage dips at power supply interfaces | PS1 <1 ms, evaluation criterion A |
| Overvoltage protection UL and UP | Present, external fuses can trigger in case of overvoltage |
| Conductor cross-section | AWG: 24 ... 16; Flexible: 0.2-1.5 mm²; rigid: 0.2-1.5 mm² |
| Permissible air humidity (storage) [%] | 10-95 |
| Permissible air humidity (transport) [%] | 10-95 |
| Ambient temperature (storage and transport) [°C] | -40-70 |
| Ambient temperature during operation | 2,000 m to 3,000 m: -25 °C to +50 °C; 3,000 m to 4,000 m: -25 °C to +45 °C; 4,000 m to 5,000 m: -25 °C to +40 °C; Up to 2,000 m: -25 °C to +55 °C |
| Maximum operating altitude [m] | 5000 |
| Contamination level | 2, no condensation |
| Weight [kg] | 0.13 |
Más piezas Bosch Rexroth
UsadoRexroth HCS03.1E-W0150-A-05-NNBV Used
UsadoRexroth HCS01.1E-W0009 -A-02-B-ET-EC- NN-L4-NN-FW Used