Sick PBT-RM040SG1SSNAMA0Z
طلب عرض سعر
معلومات سريعة
| التوفر | يُؤكَّد عند الطلب |
| الفئة | PBT |
| دورة الحياة | active |
| الضمان | 12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد) |
الشحن والتوفر
متى يمكن شحن PBT-RM040SG1SSNAMA0Z؟
PBT-RM040SG1SSNAMA0Z يُورَّد عند الطلب — اطلب عرض سعر وسنؤكد التوفر الدقيق ومدة الشحن لهذه الوحدة تحديدًا.
هل يمكنني استلام PBT-RM040SG1SSNAMA0Z شخصيًا؟
قد يكون الاستلام الشخصي من مستودعنا في غرونينغن، هولندا ممكنًا — تواصل معنا قبل الطلب للتحقق من التوفر وترتيب موعد الاستلام.
هل التوصيل السريع متاح؟
نعم — اذكر ذلك عند طلب عرض سعر لـPBT-RM040SG1SSNAMA0Z وسنُدرج خيارات التوصيل السريع في ردنا.
مصنعنا متوقف عن العمل ونحتاج هذا بشكل عاجل — هل يمكنكم المساعدة؟
في حالة عطل حرج، تواصل معنا مباشرة على +31 (0)50-7110348 أو sales@partnerplc.com — يمكننا النظر في توصيل بواسطة ساعٍ في نفس اليوم أو توصيل مخصص عاجل لـPBT-RM040SG1SSNAMA0Z، حسب التوفر والوجهة.
Pressure sensors | PBT | PBT-RM040SG1SSNAMA0Z | Pressure type: Gauge pressure | Pressure unit: MPa | Measuring range: 0 MPa ... 40 MPa | Accuracy: ≤ ± 1 %, of the span (including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement as per IEC 61298-2)) | Process connection: G ¼ A (ISO 1179-2) | Pressure port: Standard | Process temperature: 0 °C ... +80 °C | Seal: NBR | Communication interface: - | Output signal: 4 mA ... 20 mA, 2-wire | Connection type: M12 round connector x 1, 4-pin, IP67 | Supply voltage: 8 V DC ... 30 V DC
المواصفات
Features
| Medium | Liquid, gaseous |
| Pressure type | Gauge pressure |
| Pressure unit | MPa |
| Measuring range | 0 MPa ... 40 MPa |
| Process temperature | 0 °C ... +80 °C |
| Maximum ohmic load RA | 4 mA ... 20 mA, 2-wire (RA ⤠(L+ - 8 V) / 0.02 A [Ohm]), 0 V ... 10 V, 3-wire (RA > 10 kOhm), 0 V ... 5 V, 3-wire (RA > 5 kOhm) |
| Output signal | 4Â mAÂ ... 20Â mA, 2-wire |
Mechanics/electronics
| Communication interface | - |
| Process connection | G ¼ A (ISO 1179-2) |
| Wetted parts | Process connection: 316L stainless steelMeasuring chamber: stainless steel 316L |
| Internal transmission fluid | Silicone oil (only with pressure ranges < 0 bar ... 10 bar and ⤠0 bar abs ... 25 bar abs) |
| Pressure port | Standard |
| Housing material | Stainless steel |
| Connection type | M12 round connector x 1, 4-pin |
| Supply voltage | 8Â VÂ DCÂ ... 30Â VÂ DCÂ 1) |
| Power consumption | Signal current (max. 25Â mA) for current outputMax. 8Â mA for voltage output signal |
| Electrical safety | Overvoltage protection: 32Â VÂ DC, 36Â VÂ DC with 4Â mAÂ ... 20Â mAShort-circuit protection: QA towards MReverse polarity protection: L+ to MProtection class: III |
| Isolation voltage | 500Â VÂ DC |
| CE-conformity | Pressure equipment directive: 2014/68/EU, EMC directive: 2014/30/EU, ENÂ 61 326-2-3 |
| Weight sensor | Approx. 80 g |
| Seal | NBR |
| Enclosure rating | IP67Â 2) |
| Protection class III | â |
| MTTF | 815Â years |
| Pressure peak dampening | Through integrated pressure port 0.6 mm or 0.3 mm for process connection G ¼ according to DIN 3852-E (0.3 mm at and above 10 bar) |
| Overvoltage protection | 36Â VÂ DC |
Performance
| Non-linearity | ⤠± 0.5 %, of the span |
| Accuracy | ⤠± 1 %, of the span (including non-linearity, hysteresis, zero point and full scale error (corresponds to error of measurement as per IEC 61298-2)) |
| Adjustment accuracy of zero signal | ⤠0.5 % of span typ., ⤠0.8 % of span max. (with non-linerarity 0.5 %) |
| Hysteresis | â¤Â 0.16 % of the span |
| Non-repeatability | â¤Â 0.1 % of the span |
| Response time | <Â 4Â ms |
| Signal noise | â¤Â 0.3 % of the span |
| Long-term drift/one-year stability | â¤Â 0.1 % of span to IEC 61298-2 |
| Rated temperature range | 0 °C ... +80 °C |
| Service life | Minimum 100Â Mio. load cycles |
| Temperature error | ⤠± 1.0% of the range, typ., ⤠± 2.5% of the range max. |
| Reference conditions | Reference conditions: According to IECÂ 61298-1 |
Ambient data
| Ambient temperature, operation | 0 °C ... +80 °C |
| Storage temperature | â40 °C ... +70 °C |
| Relative humidity | 45Â %Â ... 75Â % |
| Shock load | 500Â g according to IECÂ 60068-2-27 (mechanical shock) |
| Vibration load | 10Â g according to IECÂ 60068-2-6 (vibration under resonance)20Â g optional |
Certificates
| EU declaration of conformity | â |
| UK declaration of conformity | â |
| China RoHS | â |
| cULus certificate | â |
Classifications
| ECLASS 5.0 | 27200614 |
| ECLASS 5.1.4 | 27200614 |
| ECLASS 6.0 | 27200614 |
| ECLASS 6.2 | 27200614 |
| ECLASS 7.0 | 27200614 |
| ECLASS 8.0 | 27200614 |
| ECLASS 8.1 | 27200614 |
| ECLASS 9.0 | 27200614 |
| ECLASS 10.0 | 27200614 |
| ECLASS 11.0 | 27200614 |
| ECLASS 12.0 | 27200614 |
| ETIM 5.0 | EC011478 |
| ETIM 6.0 | EC011478 |
| ETIM 7.0 | EC011478 |
| ETIM 8.0 | EC011478 |
| UNSPSC 16.0901 | 41112410 |
