DIGITAL OUTPUT MODULE XI290202
طلب عرض سعر
معلومات سريعة
| التوفر | يُؤكَّد عند الطلب |
| الفئة | XI2 Digital Outputs |
| دورة الحياة | active |
| الضمان | 12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد) |
الشحن والتوفر
متى يمكن شحن R911421647؟
R911421647 يُورَّد عند الطلب — اطلب عرض سعر وسنؤكد التوفر الدقيق ومدة الشحن لهذه الوحدة تحديدًا.
هل يمكنني استلام R911421647 شخصيًا؟
قد يكون الاستلام الشخصي من مستودعنا في غرونينغن، هولندا ممكنًا — تواصل معنا قبل الطلب للتحقق من التوفر وترتيب موعد الاستلام.
هل التوصيل السريع متاح؟
نعم — اذكر ذلك عند طلب عرض سعر لـR911421647 وسنُدرج خيارات التوصيل السريع في ردنا.
مصنعنا متوقف عن العمل ونحتاج هذا بشكل عاجل — هل يمكنكم المساعدة؟
في حالة عطل حرج، تواصل معنا مباشرة على +31 (0)50-7110348 أو sales@partnerplc.com — يمكننا النظر في توصيل بواسطة ساعٍ في نفس اليوم أو توصيل مخصص عاجل لـR911421647، حسب التوفر والوجهة.
The digital output module XI290202 is used to output binary 24 V control signals in a ctrlX I/O station. The module is designed with 2 channels in 2-wire technology. The short-circuit-proof push-pull output switches actively to 24 V or 0 V and has a low output delay. The signals are output DC-synchronously. The signal status is displayed on the channel LED on the detachable peripheral plug.<br><br>The outputs are issued with an adjustable divider of the bus cycle time (oversampling factor n). The module receives n bits of process data in each bus cycle, which are output one after the other at the rate bus cycle time / oversampling factor n. The minimum time for an output step width is 2 µs. The output of the output data is synchronized with high precision via distributed clock with other EtherCAT devices.<br><br>The digital outputs are powered by the 24 V supply from UP.<br><br>The logic and peripheral voltage supply as well as the EtherCAT-based module communication are routed by the module.
المواصفات
Specifications
| Connection type | Push-in |
| Connectivity technology | 2-wire technique |
| Number of channels | 2 |
| Max. output current per channel [A] | 0.5 |
| Width [mm] | 12 |
| Height [mm] | 105 |
| Depth [mm] | 99 |
| International protection code | IP20 |
| Protection class | III |
| Backplane-Bus | Standard-EtherCAT über LVDS |
| EMC resistance | EN 61000-6-2 and EN 61000-6-4 |
| Bit width, output data in the process data image | 12 Bytes |
| Bit width, input data in the process data image (including fill bits) | 6 bytes |
| Maximum current fed into one GND Output Pin [A] | 0.5 |
| Maximum current fed into all GND Output Pins of the module [A] | 1 |
| Maximum power dissipation in the module [W] | 1.81 |
| Inductive switch-off energy | Max. 150 mJ |
| Nominal load [Ohm] | 48 |
| Channel LEDs | Per channel |
| Post-assembly position | Vertical, on a horizontal support rail |
| Electrical isolation | 1200 V DC UP to UL, 707 V DC UP/UL to FE, both tested for 60 s;(not evaluated by UL) |
| Rise time (TRise) | 0.33 µs |
| Fall time (TFALL) | 0.3 µs |
| Feedback voltage resistance | Not resistant to feedback, external measures required |
| Current requirement UL | 40 mA |
| Current requirement Up | 1.05 A |
| Net current module outputs [A] | 1 |
| Nominal voltage (UL/UP) | DC 24 V (19.2 V to 30 V, including tolerance and residual ripple) PELV/SELV (safety extra-low voltage) |
| Overvoltage category | 2 |
| Nominal output voltage [V DC] | 24 |
| Conductor cross-section | AWG: 24 ... 16; Flexible: 0.2-1.5 mm²; rigid: 0.2-1.5 mm² |
| Overload protection | Granular switch-off with automatic restart |
| Permissible air humidity (storage) [%] | 10-95 |
| Permissible air humidity (transport) [%] | 10-95 |
| Ambient temperature (storage and transport) [°C] | -40-70 |
| Ambient temperature during operation | 2,000 m to 3,000 m: -25 °C to +40 °C; Up to 2000 m: -25°C to +45°C |
| Maximum operating altitude [m] | 3000 |
| Contamination level | 2, no condensation |
| Weight [kg] | 0.11 |
المزيد من قطع Bosch Rexroth
مستعملRexroth PDP01 02 328104 Used
مستعملRexroth HCS03.1E-W0150-A-05-NNBV Used
مستعملRexroth HCS01.1E-W0009 -A-02-B-ET-EC- NN-L4-NN-FW Used