Home / Wago / 1-channel analog input; IO Link Converter; 4 … 20 mA; 2xM12 connection

Available on request

1-channel analog input; IO Link Converter; 4 … 20 mA; 2xM12 connection

Name: 1-channel analog input; IO Link Converter; 4 … 20 mA; 2xM12 connection
Brand: Wago
SKU: 765-2701/200-000

MPN: 765-2701/200-000 · Brand: Wago

Price on request

Request a Quote

12-month warranty (new) · 3-month (used/refurbished)

30-day returns, no restocking fee on unused parts

Ships via

Quick facts

Availability	Confirmed on request
Category	I/O Systems
Lifecycle	active
Warranty	12-month (new) · 3-month (used/refurbished)

Shipping & availability

When can 765-2701/200-000 be shipped?

765-2701/200-000 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.

Can I pick up 765-2701/200-000 in person?

Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.

Is express delivery available?

Yes — mention it when you request a quote for 765-2701/200-000 and we'll include express shipping options in our reply.

My factory is down and I need this urgently — can you help?

For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for 765-2701/200-000, subject to availability and destination.

Application:Decentralized display, preprocessing and conversion of analog signals Use as an IO-Link device:The device has an IO-Link communication interface that requires an IO-Link-capable module (IO-Link master) for interoperation.The IO-Link interface allows direct access to the process and diagnostic data and enables setting of the device parameters during operation. Use as a stand-alone device without IO-Link:The device compares the measured current value with the set parameters and switches the output according to the selected function.This mode is without IO-Link functionality. Parameterization is performed either via the push ring or with the WAGO IO-Link Configurator.

Specifications

Notes

Note	Length of connection cables: 30 m without IO-Link on each side; 20 m with IO-Link on the master side

Technical data - General information

Supply voltage	24 VDC (18 … 30 V)
Power consumption (typ.) (24 V)	1 W
Operating mode	SIO; IO-Link
Accuracy (+25 °C)	Analog input/analog output: 0.5 % of the upper-range value
Indicators	Digital output: 1 x yellow LED; Power: 1 x green LED; Display: 7-segment red/green LED

Technical data - Input

Number of analog inputs	1
Input signal (current)	4 … 20 mA
Sensor supply	24 VDC
Sensor current (per channel) max.	0.8 A

Technical data - Output

Number of digital outputs	1
Number of analog outputs	1
Signal type (voltage)	10 … 30 VDC
Signal type (current)	4 … 20 mA
Current carrying capacity per output	50 mA
Output circuit design	Make/break contact; parameterizable
Resolution of analog outputs	10 Bit

Technical data - IO-Link

Communications	IO-Link Class A
Transmission modes	COM2 (38.4 kBaud)
IO-Link version	1.1
Process data	1 x 16-bit IN (analog); 1 x 16-bit IN (digital)
Cycle time	3.2 ms (min.)
Parameterizable functions	Operating mode, switching point, delay, scaling, etc.

Connection data

Connection technology: I/O

1 x M12-A socket; 5-pole (inputs); 1 x M12-A plug; 4-pole (outputs, IO-Link)

Physical data

Width	30 mm
Height	63 mm
Depth	24 mm

Material data

Housing material	PA
Weight	108 g

Environmental requirements

Ambient temperature (operation)	-20 … +60 °C (70 °C with display switched off)
Ambient temperature (storage)	-25 … +70 °C
Protection type	IP67
Pollution degree	3
Operating altitude	0 … 2000 m / 0 … 6562 ft
Relative humidity	≤ 90 % (at (31 °C); linearly falling to 50 % (40 °C))