Home / Wago / Switched-mode power supply; Base; 3-phase; 24 VDC output voltage; 40 A output current; DC OK contact

Available on request

Switched-mode power supply; Base; 3-phase; 24 VDC output voltage; 40 A output current; DC OK contact

Name: Switched-mode power supply; Base; 3-phase; 24 VDC output voltage; 40 A output current; DC OK contact
Brand: Wago
SKU: 2587-2348

MPN: 2587-2348 · Brand: Wago

Price on request

Request a Quote

12-month warranty (new) · 3-month (used/refurbished)

30-day returns, no restocking fee on unused parts

Ships via

Quick facts

Availability	Confirmed on request
Category	Power Supplies
Lifecycle	active
Warranty	12-month (new) · 3-month (used/refurbished)

Shipping & availability

When can 2587-2348 be shipped?

2587-2348 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.

Can I pick up 2587-2348 in person?

Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.

Is express delivery available?

Yes — mention it when you request a quote for 2587-2348 and we'll include express shipping options in our reply.

My factory is down and I need this urgently — can you help?

For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for 2587-2348, subject to availability and destination.

<p><b>Features:</b></p><ul><li>Optical status indication</li><li>Suitable for both parallel and series operation</li><li>Natural convection cooling when horizontally mounted</li><li>Connection technology with push-in termination</li><li>Electrically isolated output voltage (SELV) per EN 61010-2-201/UL 61010-2-201</li></ul>

Specifications

Technical data - Input

Phases	3
Nominal input voltage U<sub>i nom</sub>	3 x 400 … 500 VAC
Input voltage range	3 x 340 … 550 VAC
Nominal mains frequency range	50 … 60 Hz
Input current I<sub>i</sub>	≤ 2.3 A (340 VAC; nominal load)
Inrush current	≤ 20 A (at 400 VAC / 25 °C)
Power factor	≥ 0.92 (400 VAC; nominal load)
Power factor correction (PFC)	Active
Mains failure hold-up time	≥ 20 ms (3 x 400 VAC)

Technical data - Output

Nominal output voltage U<sub>o nom</sub>	24 VDC (SELV)
Output voltage range	23.5 … 28 VDC
Default setting	DC 24 V
Nominal output current I<sub>o nom</sub>	40 A (24 VDC)
Nominal output power	960 W
Deviation	≤ 3 %
Load regulation	≤ 1 %
Residual ripple	≤ 80 mV (peak-to-peak)
Overload behavior	Constant power up to 150%; short-circuit shutdown with automatic restart

Technical data - Signaling and communication

Signaling

Optical status indication (DC OK, green LED), Signal output (DC OK)

Technical data - Efficiency/power losses

Power loss P<sub>l</sub>	≤ 7 W (no load); ≤ 83.5 W (nominal load)
Efficiency (typ.)	93.5 % (400 VAC; nominal load)

Technical data - Circuit protection

Internal fuse

T 5 A / 600 VAC

Safety and protection

Isolation voltage (pri.-sec., AC)	3,510 V
Isolation voltage (pri.-PE, AC)	2,200 V
Isolation voltage (sec.-PE)	0.5 kVDC
Isolation voltage (sec.-signal)	0.5 kVDC
Protection class	I
Protection type	IP20
Reverse voltage protection	Yes
Resistance to reverse feed	≤ 35 VDC
Overvoltage category	III (≤ 2000 m a.s.l.; at 300 V ); II (≤ 5000 m a.s.l.; at 300 V)
Pollution degree	2
Transient suppression (primary)	Yes
Short-circuit-protected	Yes
Open-circuit-proof	Yes
MTBF	> 1,000,000 h (at 25 °C; per IEC 61709; SN 29500)

Connection data - Connection 1

Connection type	Input/output
Connection technology	Push-in CAGE CLAMP®
WAGO connector	WAGO 2626 Series
Solid conductor	0.2 … 10 mm² / 24 … 8 AWG
Fine-stranded conductor	0.2 … 10 mm² / 24 … 8 AWG
Fine-stranded conductor; with insulated ferrule	0.25 … 6 mm²
Fine-stranded conductor; with uninsulated ferrule	0.25 … 6 mm²
Strip length	13 … 15 mm / 0.51 … 0.59 inches

Connection data - Connection 2

Connection type	Signaling
Connection technology	Push-in CAGE CLAMP®
WAGO connector	WAGO 2086 Series
Solid conductor	0.14 … 1.5 mm² / 28 … 16 AWG
Fine-stranded conductor	0.14 … 1.5 mm² / 28 … 16 AWG
Fine-stranded conductor; with insulated ferrule	0.25 … 0.75 mm²
Fine-stranded conductor; with uninsulated ferrule	0.25 … 1.5 mm²
Strip length	8 … 9 mm / 0.31 … 0.35 inches

Physical data

Width	110 mm / 4.33 inches
Height	125 mm / 4.92 inches
Depth from upper-edge of DIN-rail	140 mm / 5.51 inches

Mechanical data

Mounting type

DIN-35 rail

Material data

Weight

2360 g

Environmental requirements

Ambient temperature (operation)	-30 … +70 °C (Device starts at -40 °C (type-tested))
Ambient temperature (storage)	-40 … +85 °C
Relative humidity	5 … 96 % (no condensation permissible)
Derating	-19.2 W/°C (> 50 °C)
Climatic category	3K3 (per EN 60721)
Operating altitude (max.)	5000 m

Standards and specifications

Conformity marking	CE
Standards/specifications	SEMI F47, EN 55032, EN 55035, EN 61000-3-3, UL 61010-2-201, EN 61204-3, EN 61558-2-16, EN IEC 61000-3-2, EN IEC 61010-1, EN IEC 61010-2-201, UL 61010-1