THR PCB terminal block; push-button; 1.5 mm²; Pin spacing 3.5 mm; 7-pole; Push-in CAGE CLAMP®; black

<h2>PCB terminal block, 250 Series, Push-in CAGE CLAMP®</h2><br/><br/>Connect conductors quickly and safely with this PCB terminal block (item number 250-207/353-604). It offers the flexibility needed for different mounting types. This PCB terminal block has a rated voltage of 320 V and can handle currents up to 8 A. Ensure that the strip lengths are between 8.5 mm and 9.5 mm when connecting conductors to this PCB terminal block. Featuring one conductor terminal along with Push-in CAGE CLAMP®, this connector outperforms the competition. Our Push-in CAGE CLAMP® is a universal, maintenance-free connection solution for all conductor types, boasting a key feature: It allows direct insertion of both solid and fine-stranded conductors with ferrules without needing tools. No preparation is required; for example, crimping the conductor's ferrule is not necessary. Dimensions: 26 x 15.5 x 12 mm (width x height x depth). Depending on the type of conductor, this PCB terminal block is designed for conductor cross sections ranging from 0.2 mm² to 1.5 mm². It features one level and seven clamping points that you can use to connect seven potentials / 7 poles. The clamping spring is made of a Copper alloy and the black housing is made of polyamide (PA46) for insulation. Tin is used for coating the contact surfaces. This PCB terminal block is operated with a push-button. The PCB terminal block is designed for THR soldering. Insert the conductor into the board at an angle of 45°.. The solder pins measure 0.4 x 0.75 mm in cross-section and 2.4 mm in length and are laid out over the entire terminal strip (staggered). There are one solder pin per potential.<br/>

Specifications