Pepperl Fuchs WTS10-12/20/105
Request a Quote
Quick facts
| Availability | Confirmed on request |
| Category | Diffuse Mode Sensors |
| Lifecycle | active |
| Warranty | 12-month (new) · 3-month (used/refurbished) |
Shipping & availability
When can WTS10-12/20/105 be shipped?
WTS10-12/20/105 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up WTS10-12/20/105 in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for WTS10-12/20/105 and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for WTS10-12/20/105, subject to availability and destination.
Diffuse mode sensor. Diffuse mode sensor, Specifically for quality checks on welding caps, Upper and lower welding caps checked simultaneously, High position and angle tolerance insensitivity of the welding cap, Stability alarm indication, Scratch resistant mineral glass lens. Detection range: 2 ... 12 mm. Reference target: Copper welding-electrode Diameter: 16 mm , Front end: 6 mm. Light source: LED. Light type: modulated visible red light , 640 nm. Ambient light limit: continuous light 40000 Lux , Modulated light 5000 Lux. Tilting angle: ± 1.5 °. Position tolerance: ± 2 mm. Operation indicator: LED green: Power on. Function indicator: LED yellow: switching state LED red: Stability alarm indicator. Teach-in indicator: LED, green/yellow flashing (approx. 4 Hz) Teach Error:LED green/yellow non equiphase flashing; 8.0 Hz. Control elements: Teach-In key. Operating voltage: 10 ... 30 V DC. No-load supply current: ≤ 70 mA. Switching type: light-on. Signal output: 2 switch outputs PNP, NO short-circuit protected reverse polarity protected. Switching current: max. 100 mA. Switching frequency: 100 Hz. Response time: 5 ms. Product standard: EN 60947-5-2. Standard conformity: . Shock and impact resistanceIEC / EN 60068. half-sine, 50 g in each X, Y and Z directionsVibration resistanceIEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions: . Shock and impact resistance: IEC / EN 60068. half-sine, 50 g in each X, Y and Z directions. Vibration resistance: IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions. Protection class: II, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1. UL approval: cULus Listed. CCC approval: CCC approval / marking not required for products rated ≤36 V. Ambient temperature: 0 ... 50 °C (32 ... 122 °F) The switching accuracy will remain, if the temperature after Teach-In does not varies more than ±7 °C. Storage temperature: -20 ... 70 °C (-4 ... 158 °F). Degree of protection: IP67. Connection: 5-pin, M12 x 1 connector. Material: . HousingPC + ABSOptical faceScratch resistant mineral glass lens: . Housing: PC + ABS. Optical face: Scratch resistant mineral glass lens. Mass: 80 g. Dimensions: . Height90 mmWidth50 mmLength20 mm: . Height: 90 mm. Width: 50 mm. Length: 20 mm
Specifications
General specifications
| Detection range | 2 ... 12 mm |
| Reference target | Copper welding-electrode Diameter: 16 mm , Front end: 6 mm |
| Light source | LED |
| Light type | modulated visible red light , 640 nm |
| Ambient light limit | continuous light 40000 Lux , Modulated light 5000 Lux |
| Tilting angle | ± 1.5 ° |
| Position tolerance | ± 2 mm |
Indicators/operating means
| Operation indicator | LED green: Power on |
| Function indicator | LED yellow: switching state LED red: Stability alarm indicator |
| Teach-in indicator | LED, green/yellow flashing (approx. 4 Hz) Teach Error:LED green/yellow non equiphase flashing; 8.0 Hz |
| Control elements | Teach-In key |
Electrical specifications
| Operating voltage | 10 ... 30 V DC UB |
| No-load supply current | ≤ 70 mA I0 |
Output
| Switching type | light-on |
| Signal output | 2 switch outputs PNP, NO short-circuit protected reverse polarity protected |
| Switching current | max. 100 mA |
| Switching frequency | 100 Hz f |
| Response time | 5 ms |
Conformity
| Product standard | EN 60947-5-2 |
Compliance with standards and directives
| Standard conformity | |
| Shock and impact resistanceIEC / EN 60068. half-sine, 50 g in each X, Y and Z directionsVibration resistanceIEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions | Shock and impact resistance |
| Shock and impact resistance | IEC / EN 60068. half-sine, 50 g in each X, Y and Z directions |
| Vibration resistance | IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions |
Approvals and certificates
| Protection class | II, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 |
| UL approval | cULus Listed |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions
| Ambient temperature | 0 ... 50 °C (32 ... 122 °F) The switching accuracy will remain, if the temperature after Teach-In does not varies more than ±7 °C |
| Storage temperature | -20 ... 70 °C (-4 ... 158 °F) |
Mechanical specifications
| Degree of protection | IP67 |
| Connection | 5-pin, M12 x 1 connector |
| Material | |
| HousingPC + ABSOptical faceScratch resistant mineral glass lens | Housing |
| Housing | PC + ABS |
| Optical face | Scratch resistant mineral glass lens |
| Mass | 80 g |
| Dimensions | |
| Height90 mmWidth50 mmLength20 mm | Height |
| Height | 90 mm |
| Width | 50 mm |
| Length | 20 mm |
More Pepperl Fuchs parts
NewPepperl + Fuchs KFD2-GUT-EX1.D New open box
Available on requestPepperl Fuchs V19-W-BK15M-PUR-U-V19-G
Available on requestPepperl Fuchs V1SD-G-GN65M-PUR-E1S-V45-G