Pepperl Fuchs VBG-PB-K20-D-EV24
Request a Quote
Quick facts
| Availability | Confirmed on request |
| Category | Gateways |
| Lifecycle | active |
| Warranty | 12-month (new) · 3-month (used/refurbished) |
Shipping & availability
When can VBG-PB-K20-D-EV24 be shipped?
VBG-PB-K20-D-EV24 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up VBG-PB-K20-D-EV24 in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for VBG-PB-K20-D-EV24 and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for VBG-PB-K20-D-EV24, subject to availability and destination.
AS-Interface gateway. PROFIBUS gateway. AS-Interface specification: V3.0. PLC-Functionality: activateable. Duplicate address detection: from AS-Interface slaves. Earth fault detection: integrated. EMC monitoring: integrated. Diagnostics function: Extended function via display. Data decoupling: integrated. UL File Number: E223772 only from low voltage, limited energy source (SELV or PELV) or listed Class 2 source. MTTFd: 105 a at 30 °C. Display: Illuminated graphical LC display for addressing and error messages. LED PROFIBUS: PROFIBUS communication active; LED green. LED AS-i ACTIVE: AS-Interface operation normal; LED green. LED CONFIG ERR: configuration error; LED red. LED PRG ENABLE: autom. programming; LED green. LED POWER: voltage ON; LED green. LED PRJ MODE: projecting mode active; LED yellow. LED U AS-i: AS-Interface voltage; LED green. Switch SET: Selection and setting of a slave address. OK button: Mode selection traditional-graphical/confirmation. Button MODE: Mode selection PRJ-operation/save configuration/cursor. ESC button: Mode selection traditional-graphical/cancel. Insulation voltage: ≥ 500 V. Rated operating voltage: 24 V DC ( 20 ... 31.6 V ) safe isolated power supplies (PELV) Note24 V power supply, max. segment length: 50 mSupply via AS-Interface power supply, max. segment length: 100 m. Rated operating current: approx. 250 mA. Power supply: max. 4 A per AS-Interface circuit. Interface type: RS-485. Protocol: PROFIBUS DP V1. Transfer rate: 9.6 kBit/s / 12 MBit/s , Automatic baud rate detection. Interface type: Chip card slot. PROFIBUS: Sub-D interface. AS-Interface: spring terminals, removable. Electromagnetic compatibility: . Directive 2014/30/EUEN 62026-2:2013 EN 61000-6-2:2005, EN 61000-6-4:2007: . Directive 2014/30/EU: EN 62026-2:2013 EN 61000-6-2:2005, EN 61000-6-4:2007. Electromagnetic compatibility: EN 61326:2003. Degree of protection: EN 60529:2000. AS-Interface: EN 62026-2:2013. Shock resistance: EN 61131-2:2004. UL approval: An isolated source with a secondary open circuit voltage of ≤ 30 VDC with a 3 A maximum over current protection. Over current protection is not required when a Class 2 source is employed. UL mark does not provide UL certification for any functional safety rating or aspects of the device.. Ambient temperature: 0 ... 55 °C (32 ... 131 °F). Storage temperature: -25 ... 85 °C (-13 ... 185 °F). Degree of protection: IP20. Mass: 500 g. Dimensions: . Height120 mmWidth75 mmLength83 mm: . Height: 120 mm. Width: 75 mm. Length: 83 mm. Construction type: Low profile housing , Stainless steel
Specifications
General specifications
| AS-Interface specification | V3.0 |
| PLC-Functionality | activateable |
| Duplicate address detection | from AS-Interface slaves |
| Earth fault detection | integrated EFD |
| EMC monitoring | integrated |
| Diagnostics function | Extended function via display |
| Data decoupling | integrated |
| UL File Number | E223772 only from low voltage, limited energy source (SELV or PELV) or listed Class 2 source |
Functional safety related parameters
| MTTFd | 105 a at 30 °C |
Indicators/operating means
| Display | Illuminated graphical LC display for addressing and error messages |
| LED PROFIBUS | PROFIBUS communication active; LED green |
| LED AS-i ACTIVE | AS-Interface operation normal; LED green |
| LED CONFIG ERR | configuration error; LED red |
| LED PRG ENABLE | autom. programming; LED green |
| LED POWER | voltage ON; LED green |
| LED PRJ MODE | projecting mode active; LED yellow |
| LED U AS-i | AS-Interface voltage; LED green |
| Switch SET | Selection and setting of a slave address |
| OK button | Mode selection traditional-graphical/confirmation |
| Button MODE | Mode selection PRJ-operation/save configuration/cursor |
| ESC button | Mode selection traditional-graphical/cancel |
Electrical specifications
| Insulation voltage | ≥ 500 V Ui |
| Rated operating voltage | 24 V DC ( 20 ... 31.6 V ) safe isolated power supplies (PELV) Note24 V power supply, max. segment length: 50 mSupply via AS-Interface power supply, max. segment length: 100 m Ue |
| Rated operating current | approx. 250 mA Ie |
| Power supply | max. 4 A per AS-Interface circuit |
Interface 1
| Interface type | RS-485 |
| Protocol | PROFIBUS DP V1 |
| Transfer rate | 9.6 kBit/s / 12 MBit/s , Automatic baud rate detection |
Interface 2
| Interface type | Chip card slot |
Connection
| PROFIBUS | Sub-D interface |
| AS-Interface | spring terminals, removable |
Directive conformity
| Electromagnetic compatibility | |
| Directive 2014/30/EUEN 62026-2:2013 EN 61000-6-2:2005, EN 61000-6-4:2007 | Directive 2014/30/EU |
| Directive 2014/30/EU | EN 62026-2:2013 EN 61000-6-2:2005, EN 61000-6-4:2007 |
Standard conformity
| Electromagnetic compatibility | EN 61326:2003 |
| Degree of protection | EN 60529:2000 |
| AS-Interface | EN 62026-2:2013 |
| Shock resistance | EN 61131-2:2004 |
Approvals and certificates
| UL approval | An isolated source with a secondary open circuit voltage of ≤ 30 VDC with a 3 A maximum over current protection. Over current protection is not required when a Class 2 source is employed. UL mark does not provide UL certification for any functional safety rating or aspects of the device. |
Ambient conditions
| Ambient temperature | 0 ... 55 °C (32 ... 131 °F) |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) |
Mechanical specifications
| Degree of protection | IP20 |
| Mass | 500 g |
| Dimensions | |
| Height120 mmWidth75 mmLength83 mm | Height |
| Height | 120 mm |
| Width | 75 mm |
| Length | 83 mm |
| Construction type | Low profile housing , Stainless steel |
More Pepperl Fuchs parts
NewPepperl + Fuchs KFD2-GUT-EX1.D New open box
Available on requestPepperl Fuchs V19-W-BK15M-PUR-U-V19-G
Available on requestPepperl Fuchs V1SD-G-GN65M-PUR-E1S-V45-G