Pepperl Fuchs VBG-DN-K20-D

Name: Pepperl Fuchs VBG-DN-K20-D
Brand: Pepperl Fuchs
SKU: VBG-DN-K20-D

MPN: VBG-DN-K20-D · Brand: Pepperl Fuchs

Price on request

Request a Quote

12-month warranty (new) · 3-month (used/refurbished)

30-day returns, no restocking fee on unused parts

Ships via

Quick facts

Availability	Confirmed on request
Category	Gateways
Lifecycle	active
Warranty	12-month (new) · 3-month (used/refurbished)

Shipping & availability

When can VBG-DN-K20-D be shipped?

VBG-DN-K20-D is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.

Can I pick up VBG-DN-K20-D in person?

Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.

Is express delivery available?

Yes — mention it when you request a quote for VBG-DN-K20-D and we'll include express shipping options in our reply.

My factory is down and I need this urgently — can you help?

For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for VBG-DN-K20-D, subject to availability and destination.

AS-Interface gateway. DeviceNet Gateway. AS-Interface specification: V3.0. PLC-Functionality: activateable. Duplicate address detection: from AS-Interface slaves. Earth fault detection: integrated. EMC monitoring: integrated. Diagnostics function: Extended function via display. UL File Number: E223772 only from low voltage, limited energy source (SELV or PELV) or listed Class 2 source. Display: Illuminated graphical LC display for addressing and error messages. LED AS-i ACTIVE: AS-Interface operation normal; LED green. LED CONFIG ERR: configuration error; LED red. LED PRG ENABLE: autom. programming; LED green. LED POWER: voltage ON; LED green. LED PRJ MODE: projecting mode active; LED yellow. LED U AS-i: AS-Interface voltage; LED green. LED MNS: Module/net status; LED green/red. Switch SET: Selection and setting of a slave address. OK button: Mode selection traditional-graphical/confirmation. Button MODE: Mode selection PRJ-operation/save configuration/cursor. ESC button: Mode selection traditional-graphical/cancel. Insulation voltage: ≥ 500 V. Rated operating voltage: from AS-Interface. Rated operating current: ≤ 200 mA from AS-Interface. Protocol: DeviceNet. Interface type: RS 232, serial Diagnostic Interface. Transfer rate: 19,2 kBit/s. AS-Interface: spring terminals, removable. DeviceNet: 5-pin CombiCon connector according to DeviceNet specification. Electromagnetic compatibility: . Directive 2014/30/EUEN 62026-2:2013: . Directive 2014/30/EU: EN 62026-2:2013. Electromagnetic compatibility: EN 61000-6-2:2005, EN 61000-6-4:2001, EN 50295:1999. Degree of protection: EN 60529:2000. AS-Interface: EN 62026-2:2013. Shock resistance: EN 61131-2. UL approval: An isolated source with a secondary open circuit voltage of ≤ 30 VDC with a 3 A maximum over current protection. Over current protection is not required when a Class 2 source is employed. UL mark does not provide UL certification for any functional safety rating or aspects of the device.. Ambient temperature: 0 ... 55 °C (32 ... 131 °F). Storage temperature: -25 ... 85 °C (-13 ... 185 °F). Degree of protection: IP20. Mass: 520 g. Dimensions: . Height120 mmWidth85 mmLength76 mm: . Height: 120 mm. Width: 85 mm. Length: 76 mm. Construction type: Low profile housing , Stainless steel

Specifications

General specifications

AS-Interface specification	V3.0
PLC-Functionality	activateable
Duplicate address detection	from AS-Interface slaves
Earth fault detection	integrated EFD
EMC monitoring	integrated
Diagnostics function	Extended function via display
UL File Number	E223772 only from low voltage, limited energy source (SELV or PELV) or listed Class 2 source

Indicators/operating means

Display	Illuminated graphical LC display for addressing and error messages
LED AS-i ACTIVE	AS-Interface operation normal; LED green
LED CONFIG ERR	configuration error; LED red
LED PRG ENABLE	autom. programming; LED green
LED POWER	voltage ON; LED green
LED PRJ MODE	projecting mode active; LED yellow
LED U AS-i	AS-Interface voltage; LED green
LED MNS	Module/net status; LED green/red
Switch SET	Selection and setting of a slave address
OK button	Mode selection traditional-graphical/confirmation
Button MODE	Mode selection PRJ-operation/save configuration/cursor
ESC button	Mode selection traditional-graphical/cancel

Electrical specifications

Insulation voltage	≥ 500 V Ui
Rated operating voltage	from AS-Interface Ue
Rated operating current	≤ 200 mA from AS-Interface Ie

Interface 1

Protocol

DeviceNet

Interface 2

Interface type	RS 232, serial Diagnostic Interface
Transfer rate	19,2 kBit/s

Connection

AS-Interface	spring terminals, removable
DeviceNet	5-pin CombiCon connector according to DeviceNet specification

Directive conformity

Electromagnetic compatibility
Directive 2014/30/EUEN 62026-2:2013	Directive 2014/30/EU
Directive 2014/30/EU	EN 62026-2:2013

Standard conformity

Electromagnetic compatibility	EN 61000-6-2:2005, EN 61000-6-4:2001, EN 50295:1999
Degree of protection	EN 60529:2000
AS-Interface	EN 62026-2:2013
Shock resistance	EN 61131-2

Approvals and certificates

UL approval

An isolated source with a secondary open circuit voltage of ≤ 30 VDC with a 3 A maximum over current protection. Over current protection is not required when a Class 2 source is employed. UL mark does not provide UL certification for any functional safety rating or aspects of the device.

Ambient conditions

Ambient temperature	0 ... 55 °C (32 ... 131 °F)
Storage temperature	-25 ... 85 °C (-13 ... 185 °F)

Mechanical specifications

Degree of protection	IP20
Mass	520 g
Dimensions
Height120 mmWidth85 mmLength76 mm	Height
Height	120 mm
Width	85 mm
Length	76 mm
Construction type	Low profile housing , Stainless steel