Pepperl Fuchs VAN-115/230AC-K27
Request a Quote
Quick facts
| Availability | Confirmed on request |
| Category | Power Supplies, Power Extenders, and Repeaters |
| Lifecycle | active |
| Warranty | 12-month (new) · 3-month (used/refurbished) |
Shipping & availability
When can VAN-115/230AC-K27 be shipped?
VAN-115/230AC-K27 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up VAN-115/230AC-K27 in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for VAN-115/230AC-K27 and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for VAN-115/230AC-K27, subject to availability and destination.
AS-Interface power supply. AS-Interface power supply, data decoupling, 4 A. UL File Number: E223176. MTBF: 100 a. Reset push-button switch: earth fault simulation/reset of earth fault display. LED EFD: earth fault display; LED red. LED AS-i ok: LED green:ON: AS-Interface voltage OKOFF: overload or no supply voltage. Fusing: T3A 15/250 V HBC (not accessible). Rated operating voltage: 85 … 132 VAC184 … 264 VAC 240 … 300 VDC. Rated operating current: 2.7 A at 115 VAC1.3 A at 230 VAC. Supply frequency: 47 ... 63 Hz (alternatively, DC possible). Efficiency: typ. 90 % (230 VAC, 4 A). Galvanic isolation: SELV/PELV. Peak inrush current: < 3.7 A2s (120 VAC)< 4.6 A2s (132 VAC)< 2.5 A2s (230 VAC)< 3.3 A2s (264 VAC). Short-circuit protection/overload: > 4,2 A< 6.5 A. Current limit: starts at > 4.2 A. Voltage: 30.5 VDC ±3 % fixed setting. Current: 4 A. Residual ripple: < 50 mVSS (500 kHz bandwidth, 50 Ω measurement, with resistive load). Voltage limitation: limited to max. 55 V. Directive conformity: . EMC Directive 2004/108/ECEN 55022:2006, EN 55011:2009 Class BEN 61000-6-3:2001 , EN 61204-3:2001: . EMC Directive 2004/108/EC: EN 55022:2006, EN 55011:2009 Class BEN 61000-6-3:2001 , EN 61204-3:2001. Standard conformity: . Noise immunityEN 61000-6-2:2005Emitted interferenceEN 61000-6-3:2007 EN 61000-3-2:2010 EN 61000-3-3:2009Galvanic isolationIEC 60364-4-41:2005 (PELV)IEC 60950:1999 (SELV)Degree of protectionIEC 60529:2001Pollution degreeEN 50178:1997Mech. capacityEN 60068-2-6:2008 (Sinus) EN 60068-2-64:2009 (Random)Shock and impact resistanceEN 60068-2-27:1995: . Noise immunity: EN 61000-6-2:2005. Emitted interference: EN 61000-6-3:2007 EN 61000-3-2:2010 EN 61000-3-3:2009. Galvanic isolation: IEC 60364-4-41:2005 (PELV)IEC 60950:1999 (SELV). Degree of protection: IEC 60529:2001. Pollution degree: EN 50178:1997. Mech. capacity: EN 60068-2-6:2008 (Sinus) EN 60068-2-64:2009 (Random). Shock and impact resistance: EN 60068-2-27:1995. Ambient temperature: -10 ... 70 °C (14 ... 158 °F) note derating. Storage temperature: -25 ... 85 °C (-13 ... 185 °F). Shock and impact resistance: 15g/6 ms10g/11 ms. Vibration resistance: Sine 2 - 17.8 Hz: ± 1.6 mm Sine 17.8 ... 500 Hz : 2 g Random 2 … 500 Hz: 0.5 m2 (s³). Pollution degree: 2. Degree of protection: IP20. Protection class: 1 (IEC 60536); Protective conductor connection necessary. Connection: Connection terminals, max. conductor cross-section Flexible cable: 0.5 … 4 mm2Rigid cable: 0.5 … 6 mm2Stripping length 7 mm. Mass: 650 g. Dimensions: . Height124 mmWidth73 mmLength102 mm: . Height: 124 mm. Width: 73 mm. Length: 102 mm. Mounting: DIN mounting rail
Specifications
General specifications
| UL File Number | E223176 |
| MTBF | 100 a |
Indicators/operating means
| Reset push-button switch | earth fault simulation/reset of earth fault display |
| LED EFD | earth fault display; LED red |
| LED AS-i ok | LED green:ON: AS-Interface voltage OKOFF: overload or no supply voltage |
Electrical specifications
| Fusing | T3A 15/250 V HBC (not accessible) |
| Rated operating voltage | 85 … 132 VAC184 … 264 VAC 240 … 300 VDC |
| Rated operating current | 2.7 A at 115 VAC1.3 A at 230 VAC |
| Supply frequency | 47 ... 63 Hz (alternatively, DC possible) |
| Efficiency | typ. 90 % (230 VAC, 4 A) |
| Galvanic isolation | SELV/PELV |
| Peak inrush current | < 3.7 A2s (120 VAC)< 4.6 A2s (132 VAC)< 2.5 A2s (230 VAC)< 3.3 A2s (264 VAC) |
Output
| Short-circuit protection/overload | > 4,2 A< 6.5 A |
| Current limit | starts at > 4.2 A |
| Voltage | 30.5 VDC ±3 % fixed setting |
| Current | 4 A |
| Residual ripple | < 50 mVSS (500 kHz bandwidth, 50 Ω measurement, with resistive load) |
| Voltage limitation | limited to max. 55 V |
Compliance with standards and directives
| Directive conformity | |
| EMC Directive 2004/108/ECEN 55022:2006, EN 55011:2009 Class BEN 61000-6-3:2001 , EN 61204-3:2001 | |
| EMC Directive 2004/108/EC | EN 55022:2006, EN 55011:2009 Class BEN 61000-6-3:2001 , EN 61204-3:2001 |
| Standard conformity | |
| Noise immunityEN 61000-6-2:2005Emitted interferenceEN 61000-6-3:2007 EN 61000-3-2:2010 EN 61000-3-3:2009Galvanic isolationIEC 60364-4-41:2005 (PELV)IEC 60950:1999 (SELV)Degree of protectionIEC 60529:2001Pollution degreeEN 50178:1997Mech. capacityEN 60068-2-6:2008 (Sinus) EN 60068-2-64:2009 (Random)Shock and impact resistanceEN 60068-2-27:1995 | |
| Noise immunity | EN 61000-6-2:2005 |
| Emitted interference | EN 61000-6-3:2007 EN 61000-3-2:2010 EN 61000-3-3:2009 |
| Galvanic isolation | IEC 60364-4-41:2005 (PELV)IEC 60950:1999 (SELV) |
| Degree of protection | IEC 60529:2001 |
| Pollution degree | EN 50178:1997 |
| Mech. capacity | EN 60068-2-6:2008 (Sinus) EN 60068-2-64:2009 (Random) |
| Shock and impact resistance | EN 60068-2-27:1995 |
Ambient conditions
| Ambient temperature | -10 ... 70 °C (14 ... 158 °F) note derating |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) |
| Shock and impact resistance | 15g/6 ms10g/11 ms |
| Vibration resistance | Sine 2 - 17.8 Hz: ± 1.6 mm Sine 17.8 ... 500 Hz : 2 g Random 2 … 500 Hz: 0.5 m2 (s³) |
| Pollution degree | 2 |
Mechanical specifications
| Degree of protection | IP20 |
| Protection class | 1 (IEC 60536); Protective conductor connection necessary |
| Connection | Connection terminals, max. conductor cross-section Flexible cable: 0.5 … 4 mm2Rigid cable: 0.5 … 6 mm2Stripping length 7 mm |
| Mass | 650 g |
| Dimensions | |
| Height124 mmWidth73 mmLength102 mm | |
| Height | 124 mm |
| Width | 73 mm |
| Length | 102 mm |
| Mounting | DIN mounting rail |
More Pepperl Fuchs parts
NewPepperl + Fuchs KFD2-GUT-EX1.D New open box
Available on requestPepperl Fuchs V19-W-BK15M-PUR-U-V19-G
Available on requestPepperl Fuchs V1SD-G-GN65M-PUR-E1S-V45-G