Pepperl Fuchs VAN-115/230AC-K16
Request a Quote
Quick facts
| Availability | Confirmed on request |
| Category | Power Supplies, Power Extenders, and Repeaters |
| Lifecycle | active |
| Warranty | 12-month (new) · 3-month (used/refurbished) |
Shipping & availability
When can VAN-115/230AC-K16 be shipped?
VAN-115/230AC-K16 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up VAN-115/230AC-K16 in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for VAN-115/230AC-K16 and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for VAN-115/230AC-K16, subject to availability and destination.
AS-Interface power supply. AS-Interface power supply, data decoupling, 8 A. UL File Number: E223176. MTBF: 100 a. Reset push-button switch: FUSE mode reset. Power selection switch: changeover switch for 115 V AC/230 V AC. LED Overload: red LED, flashes in the FUSE mode. LED IR on: red LED:ON: Plug-in jumper position 2-3OFF: Plug-in jumper position 1-2. Plug-in jumper: Position 1-2: Communication ModePosition 2-3: IR addressing. LED AS-i ok: operating display; LED green. Fusing: T8A/250 V AC HBC (not accessible). Capacity factor: > 0.5. Rated operating voltage: nominal: 100 ... 120 V AC/220 ... 240 V AC (front end selectable)permissible: 85 ... 132 V AC/184 ... 264 V AC/230 ... 375 V DC. Rated operating current: 6,0 A (Switch position 115 V)2.8 A (Switch position 230 V). Supply frequency: 47 ... 63 Hz or DC. Efficiency: typ. 92 % (at 230 V AC/8 A). Surge protection: limited to max. 55 V. Short-circuit protection/overload: FUSE Mode (2 ... 5 s current, then trips). Current limit: > 8.4 A. Voltage: 30.55 V DC ± 3 %. Current: 8 A. Galvanic isolation: overvoltage category III. Residual ripple: ≤ 50 mVss (500 kHz bandwidth, 50-Ω-measurement with ohmic load). Short-circuit current: 12 ... 25 A (max. 5 s). Electromagnetic compatibility: emitted interference in accordance with EN 50081-2 class B (EN 55011, EN 55022)noise immunity in accordance with EN 61000-6-2, EN 61000-4-2 to EN 61000-4-6, EN 61000-4-11. Ambient temperature: -10 ... 70 °C (14 ... 158 °F) (Measured 25 mm below the device)from 60° C 6W/°C power recovery necessary. Storage temperature: -25 ... 85 °C (-13 ... 185 °F). Pollution degree: 2. Degree of protection: IP20 according to EN 60529. Protection class: 1 (IEC 60536); Protective conductor connection necessary. Connection: Connection terminals, max. conductor cross-section flexible: 0.5 ... 4 mm2fixed: 0.5 ... 6 mm2stripped length 7 mm, connector sleeves are permissible. Material: . Housingmetal: . Housing: metal. Mass: approx. 890 g. Dimensions: . Height124 mmWidth91 mmLength102 mm: . Height: 124 mm. Width: 91 mm. Length: 102 mm
Specifications
General specifications
| UL File Number | E223176 |
| MTBF | 100 a |
Indicators/operating means
| Reset push-button switch | FUSE mode reset |
| Power selection switch | changeover switch for 115 V AC/230 V AC |
| LED Overload | red LED, flashes in the FUSE mode |
| LED IR on | red LED:ON: Plug-in jumper position 2-3OFF: Plug-in jumper position 1-2 |
| Plug-in jumper | Position 1-2: Communication ModePosition 2-3: IR addressing |
| LED AS-i ok | operating display; LED green |
Electrical specifications
| Fusing | T8A/250 V AC HBC (not accessible) |
| Capacity factor | > 0.5 |
| Rated operating voltage | nominal: 100 ... 120 V AC/220 ... 240 V AC (front end selectable)permissible: 85 ... 132 V AC/184 ... 264 V AC/230 ... 375 V DC |
| Rated operating current | 6,0 A (Switch position 115 V)2.8 A (Switch position 230 V) |
| Supply frequency | 47 ... 63 Hz or DC |
| Efficiency | typ. 92 % (at 230 V AC/8 A) |
| Surge protection | limited to max. 55 V |
Output
| Short-circuit protection/overload | FUSE Mode (2 ... 5 s current, then trips) |
| Current limit | > 8.4 A |
| Voltage | 30.55 V DC ± 3 % |
| Current | 8 A |
| Galvanic isolation | overvoltage category III |
| Residual ripple | ≤ 50 mVss (500 kHz bandwidth, 50-Ω-measurement with ohmic load) |
| Short-circuit current | 12 ... 25 A (max. 5 s) |
Standard conformity
| Electromagnetic compatibility | emitted interference in accordance with EN 50081-2 class B (EN 55011, EN 55022)noise immunity in accordance with EN 61000-6-2, EN 61000-4-2 to EN 61000-4-6, EN 61000-4-11 |
Ambient conditions
| Ambient temperature | -10 ... 70 °C (14 ... 158 °F) (Measured 25 mm below the device)from 60° C 6W/°C power recovery necessary |
| Storage temperature | -25 ... 85 °C (-13 ... 185 °F) |
| Pollution degree | 2 |
Mechanical specifications
| Degree of protection | IP20 according to EN 60529 |
| Protection class | 1 (IEC 60536); Protective conductor connection necessary |
| Connection | Connection terminals, max. conductor cross-section flexible: 0.5 ... 4 mm2fixed: 0.5 ... 6 mm2stripped length 7 mm, connector sleeves are permissible |
| Material | |
| Housingmetal | |
| Housing | metal |
| Mass | approx. 890 g |
| Dimensions | |
| Height124 mmWidth91 mmLength102 mm | |
| Height | 124 mm |
| Width | 91 mm |
| Length | 102 mm |
More Pepperl Fuchs parts
NewPepperl + Fuchs KFD2-GUT-EX1.D New open box
Available on requestPepperl Fuchs V19-W-BK15M-PUR-U-V19-G
Available on requestPepperl Fuchs V1SD-G-GN65M-PUR-E1S-V45-G