Pepperl Fuchs USB-FBPS-1.11.45.NI
Request a Quote
Quick facts
| Availability | Confirmed on request |
| Category | Power Supplies for FOUNDATION Fieldbus H1 |
| Lifecycle | active |
| Warranty | 12-month (new) · 3-month (used/refurbished) |
Shipping & availability
When can USB-FBPS-1.11.45.NI be shipped?
USB-FBPS-1.11.45.NI is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up USB-FBPS-1.11.45.NI in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for USB-FBPS-1.11.45.NI and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for USB-FBPS-1.11.45.NI, subject to availability and destination.
USB Fieldbus Power Supply. USB fieldbus power supply for 1 or 2 field devices with D-sub socket for connecting to National Instruments NI PCMCIA FBUS card, Output: min. 11 V/45 mA, For 1...2 devices/test setups, In conjunction with NI PCMCIA-FBUS card, Permitted for Zone 2 operation, For FOUNDATION Fieldbus H1, Device coupler location: non-explosion hazardous area, Instrument location / spur protection: non-explosion hazardous area, Function: Fieldbus Power Supply, Design / Mounting: Handheld/mobile. Design / Mounting: Handheld/mobile. Installation in hazardous area: Zone 2. Connection: USB-Male Connector Typ A (Standard). Rated voltage: typ. 5 V. Rated current: max. 350 mA. Power dissipation: typ. 250 mW. Connection: D-Sub socket 9-pin ; pin 6: Bus + , pin 7: Bus -. Rated voltage: min. 11 V. Rated current: 45 mA. Short-circuit current: typ. 60 mA. Terminating resistor: 50 Ω. LED ERR: red flashing: short-circuit or undervoltage at output. LED PWR: green: Interface Power ON/OK. Electromagnetic compatibility: . Directive 2014/30/EUEN 61326-1:2013: . Directive 2014/30/EU: EN 61326-1:2013. Degree of protection: IEC/EN 60529. Fieldbus standard: IEC 61158-2. Ambient temperature: -10 ... 50 °C (14 ... 122 °F). Storage temperature: -40 ... 70 °C (-40 ... 158 °F). Pollution degree: max. 2, according to IEC 60664. Connection type: USB-Male Connector Typ A (Standard). Housing: 56 x 32 x 17 mm. Housing material: Polycarbonate. Degree of protection: IP20. Mass: approx. 105 g. Outputs: . VoltageUo17.5 V: Uo. Voltage: 17.5 V. Certificate: PF 08 CERT 1303 X. Marking II 3G Ex nA II T4: . Marking: II 3G Ex nA II T4. Directive conformity: . Directive 2014/34/EUEN 60079-0:2012 , EN 60079-11:2012 , EN 60079-15:2010: . Directive 2014/34/EU: EN 60079-0:2012 , EN 60079-11:2012 , EN 60079-15:2010. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Specifications
General specifications
| Design / Mounting | Handheld/mobile |
| Installation in hazardous area | Zone 2 |
Supply
| Connection | USB-Male Connector Typ A (Standard) |
| Rated voltage | typ. 5 V Ur |
| Rated current | max. 350 mA Ir |
| Power dissipation | typ. 250 mW |
Fieldbus connection
| Connection | D-Sub socket 9-pin ; pin 6: Bus + , pin 7: Bus - |
| Rated voltage | min. 11 V UN |
| Rated current | 45 mA IN |
| Short-circuit current | typ. 60 mA |
| Terminating resistor | 50 Ω |
Indicators/operating means
| LED ERR | red flashing: short-circuit or undervoltage at output |
| LED PWR | green: Interface Power ON/OK |
Directive conformity
| Electromagnetic compatibility | |
| Directive 2014/30/EUEN 61326-1:2013 | Directive 2014/30/EU |
| Directive 2014/30/EU | EN 61326-1:2013 |
Standard conformity
| Degree of protection | IEC/EN 60529 |
| Fieldbus standard | IEC 61158-2 |
Ambient conditions
| Ambient temperature | -10 ... 50 °C (14 ... 122 °F) |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Pollution degree | max. 2, according to IEC 60664 |
Mechanical specifications
| Connection type | USB-Male Connector Typ A (Standard) |
| Housing | 56 x 32 x 17 mm |
| Housing material | Polycarbonate |
| Degree of protection | IP20 |
| Mass | approx. 105 g |
Data for application in connection with hazardous areas
| Outputs | |
| VoltageUo17.5 V | Uo Voltage |
| Voltage | 17.5 V Uo |
| Certificate | PF 08 CERT 1303 X |
| Marking II 3G Ex nA II T4 | Marking |
| Marking | II 3G Ex nA II T4 |
| Directive conformity | |
| Directive 2014/34/EUEN 60079-0:2012 , EN 60079-11:2012 , EN 60079-15:2010 | Directive 2014/34/EU |
| Directive 2014/34/EU | EN 60079-0:2012 , EN 60079-11:2012 , EN 60079-15:2010 |
General information
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
More Pepperl Fuchs parts
NewPepperl + Fuchs KFD2-GUT-EX1.D New open box
Available on requestPepperl Fuchs V19-W-BK15M-PUR-U-V19-G
Available on requestPepperl Fuchs V1SD-G-GN65M-PUR-E1S-V45-G