Pepperl Fuchs OBE500-R2F-SE2-L

Thru-beam sensor (pair). Thru-beam sensor, flat design, space-saving M2 mounting, 500 mm detection range, red light, dark on, PNP output, fixed cable, Very flat design for direct mounting without mounting bracket, DuraBeam Laser Sensors - durable and employable like an LED, TEACH-IN, Detection of partially transparent objects by teach-in, Detection of small parts or flat objects from 0.25 mm. Emitter: OBE500-R2F-S-L. Receiver: OBE500-R2F-E2-L. Effective detection range: 0 ... 500 mm. Threshold detection range: 700 mm. Light source: LASER LIGHT. Light type: modulated visible red light , 680 nm. Laser nominal ratings: . NoteLASER LIGHT , DO NOT STARE INTO BEAMLaser class1Wave length680 nmBeam divergence> 5 mradPulse lengthapprox. 3 µsRepetition rateapprox. 16.6 kHzmax. pulse energy8 nJ: . Note: LASER LIGHT , DO NOT STARE INTO BEAM. Laser class: 1. Wave length: 680 nm. Beam divergence: > 5 mrad. Pulse length: approx. 3 µs. Repetition rate: approx. 16.6 kHz. max. pulse energy: 8 nJ. Angle deviation: approx. 0.5 °. Object size: typ. starts from 0.5 mm ; typ. from 0.25 mm (after teach-in). Diameter of the light spot: approx. 4 mm at a distance of 500 mm. Opening angle: approx. 1 °. Optical face: frontal. Ambient light limit: EN 60947-5-2 : 25000 Lux. MTTFd: 806 a. Mission Time (TM): 20 a. Diagnostic Coverage (DC): 0 %. Operation indicator: LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz). Function indicator: Receiver: LED yellow, lights up when light beam is free, flashes when falling short of the operating reserve ; OFF when light beam is interrupted. Operating voltage: 12 ... 24 V. No-load supply current: Emitter: ≤ 10 mA Receiver: ≤ 8 mA. Protection class: III. Test input: Test of switching function at 0 V. Switching threshold: Teach-In input. Switching type: NO contact / dark-on. Signal output: 1 PNP output, short-circuit protected, reverse polarity protected, open collector. Switching voltage: max. 30 V DC. Switching current: max. 50 mA , resistive load. Voltage drop: ≤ 1.5 V DC. Switching frequency: approx. 2 kHz. Response time: 250 µs. Product standard: EN 60947-5-2. Laser safety: EN 60825-1:2007. UL approval: E87056 , cULus Recognized, Class 2 Power Source. CCC approval: CCC approval / marking not required for products rated ≤36 V. FDA approval: IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. Ambient temperature: -10 ... 60 °C (14 ... 140 °F). Storage temperature: -20 ... 70 °C (-4 ... 158 °F). Degree of protection: IP67. Connection: 2 m fixed cable. Material: . HousingPC (Polycarbonate) and Stainless steelOptical facePMMACablePUR: . Housing: PC (Polycarbonate) and Stainless steel. Optical face: PMMA. Cable: PUR. Mass: approx. 20 g per sensor. Tightening torque, fastening screws: 0.25 Nm. Dimensions: . Height25.5 mmWidth12 mmDepth4.1 mm: . Height: 25.5 mm. Width: 12 mm. Depth: 4.1 mm. Cable length: 2 m

Specifications