Pepperl Fuchs LML-S
Request a Quote
Quick facts
| Availability | Confirmed on request |
| Category | Magnetic Immersion Probes |
| Lifecycle | active |
| Warranty | 12-month (new) · 3-month (used/refurbished) |
Shipping & availability
When can LML-S be shipped?
LML-S is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up LML-S in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for LML-S and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for LML-S, subject to availability and destination.
Magnetic Immersion Probe for Limit Value Detection. Sensor for limit value detection in liquids, Media contacting parts of stainless steel, Mounting without removing the float (G5 and G6). Function principle: ring magnet as switching element in the float, reed contact, change-over contactnumber of contacts:- version LML1: 1 contact- version LML2: 2 contacts- version LML3: 3 contacts. Series: LML-S. Rated voltage: 250 V AC/DC. Current consumption: 1 A. Power consumption: 40 VA. Connection: This device may be used with any sequential circuit, as long as the circuit can support the electrical circuit values of the switching elements.. Low voltage: . Directive 2014/35/EUEN 61010-1:2010: . Directive 2014/35/EU: EN 61010-1:2010. Degree of protection: IEC 60529:2000. Installation conditions: . Switching pointposition according to specification: . Switching point: position according to specification. Process conditions: . Process temperatureversion LML: -30 ... 150 °C (-22 ... 302 °F)version LML-PVC1: -10 ... 80 °C (14 ... 176 °F)Process pressure (static pressure)≤ 25 bar (362.6 psi)Densityversion S2: ≥ 0.8 g/cm3version S3: ≥ 0.7 g/cm3: . Process temperature: version LML: -30 ... 150 °C (-22 ... 302 °F)version LML-PVC1: -10 ... 80 °C (14 ... 176 °F). Process pressure (static pressure): ≤ 25 bar (362.6 psi). Density: version S2: ≥ 0.8 g/cm3version S3: ≥ 0.7 g/cm3. Ambient temperature: -20 ... 70 °C (-4 ... 158 °F). Degree of protection: IP66 / IP68. Connection: version LML: terminal box, max. 9 terminalsversion LML-PVC1: connection cable 1 m (3.3 ft), 0.75 mm2. Material: float, guide tube, process connection: stainless steel 1.4571/316Ticonnection cable: PVCterminal box: aluminum die-casting. Dimensions: float:- version S2: cylinder ∅44 mm x 52 mm- version S3: ball ∅52 mmguide tube: ∅12 mm, max. length 3000 mmterminal box: 80 x 75 x 55 mm. Process connection: thread G3/8A, G1-1/2A, G2A to DIN/ISO 228/1. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.. Designation: - LML-Z11 set collar, 1.4571/316Ti - LML-FS2 float, cylinder, Ø44 mm x 52 mm, 1.4571/316Ti- LML-FS3 float, ball, Ø52 mm, 1.4571/316Ti
Specifications
General specifications
| Function principle | ring magnet as switching element in the float, reed contact, change-over contactnumber of contacts:- version LML1: 1 contact- version LML2: 2 contacts- version LML3: 3 contacts |
| Series | LML-S |
Supply
| Rated voltage | 250 V AC/DC Ur |
| Current consumption | 1 A |
| Power consumption | 40 VA |
Output
| Connection | This device may be used with any sequential circuit, as long as the circuit can support the electrical circuit values of the switching elements. |
Directive conformity
| Low voltage | |
| Directive 2014/35/EUEN 61010-1:2010 | Directive 2014/35/EU |
| Directive 2014/35/EU | EN 61010-1:2010 |
Conformity
| Degree of protection | IEC 60529:2000 |
Operating conditions
| Installation conditions | |
| Switching pointposition according to specification | Switching point |
| Switching point | position according to specification |
| Process conditions | |
| Process temperatureversion LML: -30 ... 150 °C (-22 ... 302 °F)version LML-PVC1: -10 ... 80 °C (14 ... 176 °F)Process pressure (static pressure)≤ 25 bar (362.6 psi)Densityversion S2: ≥ 0.8 g/cm3version S3: ≥ 0.7 g/cm3 | Process temperature |
| Process temperature | version LML: -30 ... 150 °C (-22 ... 302 °F)version LML-PVC1: -10 ... 80 °C (14 ... 176 °F) |
| Process pressure (static pressure) | ≤ 25 bar (362.6 psi) |
| Density | version S2: ≥ 0.8 g/cm3version S3: ≥ 0.7 g/cm3 |
Ambient conditions
| Ambient temperature | -20 ... 70 °C (-4 ... 158 °F) |
Mechanical specifications
| Degree of protection | IP66 / IP68 |
| Connection | version LML: terminal box, max. 9 terminalsversion LML-PVC1: connection cable 1 m (3.3 ft), 0.75 mm2 |
| Material | float, guide tube, process connection: stainless steel 1.4571/316Ticonnection cable: PVCterminal box: aluminum die-casting |
| Dimensions | float:- version S2: cylinder ∅44 mm x 52 mm- version S3: ball ∅52 mmguide tube: ∅12 mm, max. length 3000 mmterminal box: 80 x 75 x 55 mm |
| Process connection | thread G3/8A, G1-1/2A, G2A to DIN/ISO 228/1 |
General information
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
Accessories
| Designation | - LML-Z11 set collar, 1.4571/316Ti - LML-FS2 float, cylinder, Ø44 mm x 52 mm, 1.4571/316Ti- LML-FS3 float, ball, Ø52 mm, 1.4571/316Ti |
More Pepperl Fuchs parts
NewPepperl + Fuchs KFD2-GUT-EX1.D New open box
Available on requestPepperl Fuchs V19-W-BK15M-PUR-U-V19-G
Available on requestPepperl Fuchs V1SD-G-GN65M-PUR-E1S-V45-G