Pepperl Fuchs FI-PFH-NS0137-R
Request a Quote
Quick facts
| Availability | Confirmed on request |
| Category | K-System |
| Lifecycle | active |
| Warranty | 12-month (new) · 3-month (used/refurbished) |
Shipping & availability
When can FI-PFH-NS0137-R be shipped?
FI-PFH-NS0137-R is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up FI-PFH-NS0137-R in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for FI-PFH-NS0137-R and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for FI-PFH-NS0137-R, subject to availability and destination.
HART Termination Board. Connection board for K-System HART Multiplexer, 16-channel, Interface for series connection or parallel connection, Integrated, switchable 220 Ω resistor, Connection via screw terminals. Load resistor: 220 Ω , switchable on. Type: multiplexer connection : IDC plug, 26-pin. Rated current: max. 30 mA per channel. Control elements: DIP switch. DIP switch: selection of operating mode:- ON: without load resistor- OFF: with load resistor. Factory setting: DIP switches S1 and S2: ON. Electromagnetic compatibility: . Directive 2014/30/EUEN 61326-1:2013 (industrial locations): . Directive 2014/30/EU: EN 61326-1:2013 (industrial locations). Electromagnetic compatibility: NE 21:2017For further information see system description.. Degree of protection: IEC 60529:2001. Shock resistance: EN 60068-2-27. Vibration resistance: EN 60068-2-6. Ambient temperature: 0 ... 50 °C (32 ... 122 °F). Storage temperature: -15 ... 50 °C (5 ... 122 °F). Relative humidity: ≤ 93 % non-condensing. Shock resistance: 15 g , 11 ms. Vibration resistance: 1 g , 10 ... 150 Hz. Degree of protection: IP20. Connection: . Field sidescrew terminals , greenControl sidescrew terminals , green HART : 1 x IDC plug, 26-pin: . Field side: screw terminals , green. Control side: screw terminals , green HART : 1 x IDC plug, 26-pin. Core cross section: 0.25 ... 1.5 mm2 (24 ... 16 AWG). Material: . HousingPVC: . Housing: PVC. Mass: approx. 210 g. Dimensions: 110 x 125 x 61 mm (4.3 x 4.9 x 2.4 inch) (W x H x D). Height125 mmWidth110 mmDepth61 mm: . Height: 125 mm. Width: 110 mm. Depth: 61 mm. Mounting: on 35 mm DIN mounting rail acc. to EN 60715:2001. Certificate: PF 11 CERT 1930 X. Marking II 3G Ex nA IIC T4 Gc: . Marking: II 3G Ex nA IIC T4 Gc. Directive conformity: . Directive 2014/34/EUEN IEC 60079-0:2018+AC:2020 , EN 60079-15:2010: . Directive 2014/34/EU: EN IEC 60079-0:2018+AC:2020 , EN 60079-15:2010. Supplementary information: Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Specifications
HART signal channels (non-intrinsically safe)
| Load resistor | 220 Ω , switchable on |
Interface
| Type | multiplexer connection : IDC plug, 26-pin |
Signal lines
| Rated current | max. 30 mA per channel |
Indicators/settings
| Control elements | DIP switch |
| DIP switch | selection of operating mode:- ON: without load resistor- OFF: with load resistor |
| Factory setting | DIP switches S1 and S2: ON |
Directive conformity
| Electromagnetic compatibility | |
| Directive 2014/30/EUEN 61326-1:2013 (industrial locations) | |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
Conformity
| Electromagnetic compatibility | NE 21:2017For further information see system description. |
| Degree of protection | IEC 60529:2001 |
| Shock resistance | EN 60068-2-27 |
| Vibration resistance | EN 60068-2-6 |
Ambient conditions
| Ambient temperature | 0 ... 50 °C (32 ... 122 °F) |
| Storage temperature | -15 ... 50 °C (5 ... 122 °F) |
| Relative humidity | ≤ 93 % non-condensing |
| Shock resistance | 15 g , 11 ms |
| Vibration resistance | 1 g , 10 ... 150 Hz |
Mechanical specifications
| Degree of protection | IP20 |
| Connection | |
| Field sidescrew terminals , greenControl sidescrew terminals , green HART : 1 x IDC plug, 26-pin | |
| Field side | screw terminals , green |
| Control side | screw terminals , green HART : 1 x IDC plug, 26-pin |
| Core cross section | 0.25 ... 1.5 mm2 (24 ... 16 AWG) |
| Material | |
| HousingPVC | |
| Housing | PVC |
| Mass | approx. 210 g |
| Dimensions | 110 x 125 x 61 mm (4.3 x 4.9 x 2.4 inch) (W x H x D) |
| Height125 mmWidth110 mmDepth61 mm | |
| Height | 125 mm |
| Width | 110 mm |
| Depth | 61 mm |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Data for application in connection with hazardous areas
| Certificate | PF 11 CERT 1930 X |
| Marking II 3G Ex nA IIC T4 Gc | |
| Marking | II 3G Ex nA IIC T4 Gc |
| Directive conformity | |
| Directive 2014/34/EUEN IEC 60079-0:2018+AC:2020 , EN 60079-15:2010 | |
| Directive 2014/34/EU | EN IEC 60079-0:2018+AC:2020 , EN 60079-15:2010 |
General information
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
More Pepperl Fuchs parts
NewPepperl + Fuchs KFD2-GUT-EX1.D New open box
Available on requestPepperl Fuchs V19-W-BK15M-PUR-U-V19-G
Available on requestPepperl Fuchs V1SD-G-GN65M-PUR-E1S-V45-G