DIGITAL OUTPUT MODULE XI241202
見積もりを依頼する
基本情報
| 在庫状況 | お問い合わせにより確認 |
| カテゴリー | XI2 Digital Outputs |
| ライフサイクル | active |
| 保証 | 12か月（新品）・3か月（中古・整備済み） |
配送・在庫状況
R911421644はいつ発送できますか？
R911421644はお問い合わせにより調達いたします — 見積もりを依頼いただければ、この個体の正確な在庫状況と配送スケジュールをご案内いたします。
R911421644を直接引き取ることはできますか？
オランダ・フローニンゲンの当社倉庫での引き取りが可能な場合があります — ご注文前にお問い合わせいただき、在庫状況と引き取り日時をご確認ください。
エクスプレス配送は利用できますか？
はい — R911421644の見積もり依頼時にその旨をお知らせいただければ、返信にエクスプレス配送のオプションを含めてご案内いたします。
工場が停止しており緊急で必要です — 対応可能ですか？
重大な故障の場合は、+31 (0)50-7110348またはsales@partnerplc.comまで直接ご連絡ください — R911421644について、在庫状況と配送先に応じて即日クーリエまたは専用タクシー・ホットショット配送を検討いたします。
The digital output module XI241202 is used to output pulse-width-modulated binary 24 V control signals in a ctrlX I/O station. It has two channels in a 2-wire technique. The signal state is shown at the channel LED on the removable peripheral connector. The parent control specifies the clock and pulse/pause ratio. The digital outputs are fed via the 24 V supply from UP. <br><br>The logic and peripheral voltage supply as well as the EtherCAT-based module communication are routed through the module.
仕様
Specifications
| Connection type | Push-in |
| Connectivity technology | 2-wire technique |
| Number of channels | 2 |
| Max. output current per channel [A] | 0.5 |
| Width [mm] | 12 |
| Height [mm] | 105 |
| Depth [mm] | 99 |
| International protection code | IP20 |
| Protection class | III |
| Backplane-Bus | Standard-EtherCAT über LVDS |
| EMC resistance | EN 61000-6-2 and EN 61000-6-4 |
| Bit width, output data in the process data image | 12 Bytes |
| Bit width, input data in the process data image (including fill bits) | 6 bytes |
| Maximum current fed into one GND Output Pin [A] | 0.5 |
| Maximum current fed into all GND Output Pins of the module [A] | 1 |
| Maximum power dissipation in the module [W] | 1.805 |
| Inductive switch-off energy | Max. 150 mJ |
| Nominal load [Ohm] | 48 |
| Channel LEDs | Per channel |
| Post-assembly position | Vertical, on a horizontal support rail |
| Electrical isolation | 1200 V DC UP to UL, 707 V DC UP/UL to FE, both tested for 60 s;(not evaluated by UL) |
| Rise time (TRise) | 0.33 µs |
| Fall time (TFALL) | 0.3 µs |
| Feedback voltage resistance | Not resistant to feedback, external measures required |
| Current requirement UL | 35 mA |
| Current requirement Up | 1.05 mA |
| Net current module outputs [A] | 1 |
| Nominal voltage (UL/UP) | DC 24 V (19.2 V to 30 V, including tolerance and residual ripple) PELV/SELV (safety extra-low voltage) |
| Overvoltage category | 2 |
| Nominal output voltage [V DC] | 24 |
| Conductor cross-section | AWG: 24 ... 16; Flexible: 0.2-1.5 mm²; rigid: 0.2-1.5 mm² |
| Overload protection | Granular switch-off with automatic restart |
| Permissible air humidity (storage) [%] | 10-95 |
| Permissible air humidity (transport) [%] | 10-95 |
| Ambient temperature (storage and transport) [°C] | -40-70 |
| Ambient temperature during operation | 2,000 m to 3,000 m: -25 °C to +50 °C; 3,000 m to 4,000 m: -25 °C to +45 °C; 4,000 m to 5,000 m: -25 °C to +40 °C; Up to 2,000 m: -25 °C to +55 °C |
| Maximum operating altitude [m] | 5000 |
| Contamination level | 2, no condensation |
| Weight [kg] | 0.11 |
Bosch Rexrothの他の部品
中古Rexroth HCS03.1E-W0150-A-05-NNBV Used
中古Rexroth HCS01.1E-W0009 -A-02-B-ET-EC- NN-L4-NN-FW Used