Snap-in plug; 2-pole; Cod. F; light gray

Name: Snap-in plug; 2-pole; Cod. F; light gray
Brand: Wago
SKU: 893-2032

MPN: 893-2032 · Brand: Wago

Price on request

Request a Quote

12-month warranty (new) · 3-month (used/refurbished)

30-day returns, no restocking fee on unused parts

Ships via

Quick facts

Availability	Confirmed on request
Category	Pluggable Connectors
Lifecycle	active
Warranty	12-month (new) · 3-month (used/refurbished)

Shipping & availability

When can 893-2032 be shipped?

893-2032 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.

Can I pick up 893-2032 in person?

Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.

Is express delivery available?

Yes — mention it when you request a quote for 893-2032 and we'll include express shipping options in our reply.

My factory is down and I need this urgently — can you help?

For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for 893-2032, subject to availability and destination.

<h2>Male connector/plug <i>WINSTA</i>® KNX with protection type IP20</h2><br/><br/>The <i>WINSTA</i>® KNX male connector/plug with protection against mismating provides the foundation for assembly of fine-stranded and solid conductors. Our pluggable installation connectors with spring pressure connection technology function completely without screw connections. They allow flexible, error-free installation in a large number of applications. The coding options reduce installation errors, allowing fast, maintenance-free wiring of all components. The pluggable installation connector offers touch-proof protection with live components in accordance with protection type IP20 (Only when mated and secured with a strain relief housing (These compact connectors are not designed for use in open, easily accessible areas.)). The standardised KNX interface represents a manufacturer-independent communication protocol for intelligently networking state-of-the-art home and building system technologies. The grey <i>WINSTA</i>® KNX pluggable installation connectors in F coding support applications in the low-voltage domain.<br/><br/><h3><i>WINSTA</i>® KNX solutions for your electrical installation – protected against mismating and maintenance-free</h3><br/><br/>The WINSTA® Pluggable Connection System allows pluggable electrical installation. This saves time, lowers costs, and reduces the need for servicing. Take advantage of the pluggable version of our maintenance-free spring pressure connection technology too! Plan your installation with with protection against mismating from WAGO. <br/><br/><ul><br/><li>products perfectly tailored to your requirements guarantee safe use</li><li>for high-power connections for supplying power</li><li>ready to install and use immediately</li><li>convenient installation and commissioning</li></ul>

Specifications

Notes

Note

The snap-in connectors must be relieved of tensile and transverse forces.A surface finish can influence the edge radius of the cutouts. This may affect the snap-in socket fit, so ensure an adequate fit before use. In addition, the punched edge should be on the inside for punched cutouts.The wings of the snap-in connectors must not be mechanically stressed for a long period before use (e.g., due to a pre-locking position).

Electrical data - Ratings per IEC/EN

Ratings per	IEC/EN 60664-1
Nominal voltage (III/3)	50 V
Rated impulse withstand voltage (III / 3)	0.8 kV
Rated current	3 A
Legend (ratings)	(III / 3) ≙ Overvoltage category III / Pollution degree 3
Ratings per	IEC/EN 60664-1 / IEC/EN 60664-1 / IEC/EN 60664-1
Overvoltage category	III / III / II
Pollution degree	3 / 2 / 2
Nominal voltage	50 V
Rated impulse withstand voltage	0.8 kV
Rated current	3 A

Electrical data - General information

Note on contact resistance

Approx. 3 mΩ contact resistance

Connection data

Clamping units	2
Total number of potentials	2

Connection data - Connection 1

Connection technology	PUSH WIRE®
Actuation type	Push-in
Conductor diameter	0.8 mm
Strip length	9 mm / 0.35 inches
Pole number	2
Conductor entry direction to mating direction	0 °

Physical data

Width	19.6 mm / 0.772 inches
Height	19.6 mm / 0.772 inches
Depth	29.5 mm / 1.161 inches

Mechanical data

Technology	KNX
Use	KNX
Coding	F
Variable coding	No
Marking	1+ 2-
Potential marking	1+ 2-
Mating force of a plug-in connection	approx. 10 … 15 N
Retention force of a plug-in connection	Locked: > 80 N
Unmating force of a plug-in connection	Unlocked: approx. 15 … 20 N
Number of mating cycles	200
Housing sheet thickness	0.5 … 2 mm / 0.02 … 0.079 inches
Mounting type	Snap-in flange
Protection type	IP20; Only when mated and secured with a strain relief housing (These compact connectors are not designed for use in open, easily accessible areas.)

Plug-in connection

Contact type (pluggable connector)	Male connector/plug
Connector (connection type)	for conductor
Mismating protection	Yes
Note on mismating protection	All WINSTA® components are 100% protected against mismating when:a.) plugging different numbers of polesb.) plugging while rotated 180 c.) plugging while laterally staggeredd.) plugging one pole
Locking lever	No
Locking of plug-in connection	locking lever

Material data

Note (material data)	Information on material specifications can be found here
Color	light gray
Insulation material (main housing)	Polyamide (PA66)
Flammability class per UL94	V0
Clamping spring material	Chrome-nickel spring steel (CrNi)
Contact material	Copper alloy; surface-treated
Contact plating	Tin
Weight	10 g

Environmental requirements

Processing temperature	-5 … +40 °C
Continuous operating temperature	-35 … +85 °C
Note on continuous operating temperature	Insulating parts for temperatures ≤ 105 °C