Frequency signal conditioner; Current and voltage output signal; Configuration via software; Supply voltage: 24 VDC; 6 mm module width
Request a Quote
Quick facts
| Availability | Confirmed on request |
| Category | Signal Conditioners and Isolation Amplifiers |
| Lifecycle | active |
| Warranty | 12-month (new) · 3-month (used/refurbished) |
Shipping & availability
When can 857-500 be shipped?
857-500 is sourced on request — request a quote and we'll confirm the exact availability and shipping timeline for this specific unit.
Can I pick up 857-500 in person?
Local pickup from our Groningen, Netherlands warehouse may be possible — contact us before ordering to check availability and arrange a collection time.
Is express delivery available?
Yes — mention it when you request a quote for 857-500 and we'll include express shipping options in our reply.
My factory is down and I need this urgently — can you help?
For a critical breakdown, contact us directly at +31 (0)50-7110348 or sales@partnerplc.com — we can look into same-day courier or dedicated taxi/hotshot delivery for 857-500, subject to availability and destination.
<p><b>Short description:</b></p><p>WAGO's frequency signal conditioner collects 0.1 … 120 kHz signals from NAMUR, NPN or PNP sensors and converts them into a standard analog signal.</p><p><b>Features:</b></p><ul><li>PC configuration interface</li><li>Signal acquisition from NAMUR, NPN or PNP sensors</li><li>Calibrated measurement range switching</li><li>3-way electrical isolation with 2.5 kV test voltage</li></ul>
Specifications
Notes
| Safety Information | Input and output must be safely isolated from any hazardous live parts! |
| Note | Use shielded cables for data and signal lines.Electromagnetic interference is reduced and signal quality increased. Measurement errors, data transmission faults and interference due to excessive voltage can be prevented!, Additional setting options via the WAGO Interface Configuration Software |
Technical data - Configuration
| Configuration options | DIP switch, WAGO Interface Configuration Software |
Technical data - Input
| Input signal type | Frequency generators, NAMUR sensors, NPN/PNP transistor outputs, Mechanical contact (dry contact) |
Technical data - Input (sensor type 1)
| Sensor type 1 | frequency generator, NPN/PNP transistor output with pull-up or pull-down resistor |
| Measurement range (frequency) 1 | 0.1 Hz … 120 kHz |
| Pulse length 1 | ≥ 1 µs |
| Measurement span 1 (min.) | 10 Hz |
| Signal level | 1.5 V; 10 V; 20 V (switchable) |
| Input voltage (max.) | ± 31.2 VDC |
| Signal form | Any |
| Coupling | AC/DC (adjustable; AC above 10 Hz) |
| Input resistance | 10 kΩ |
Technical data - Input (sensor type 2)
| Sensor type 2 | NAMUR sensor per DIN EN 50227 |
| Measurement range (frequency) 2 | 0.1 Hz … 1 kHz |
| Pulse length 2 | ≥ 500 µs |
| Measurement span 2 (min.) | 10 Hz |
| Sensor supply | 8.2 VDC |
| Signal current (0) | ≤ 1.2 mA |
| Signal current (1) | ≥ 2.1 mA |
| Hysteresis | 0.45 mA |
| Short-circuit current (max.) | 14 mA |
| Short circuit monitoring | ≥ 4.7 mA |
| Wire break monitoring | ≤ 0.2 mA |
| Input resistance 2 | ≤ 600 Ω |
Technical data - Input (sensor type 3)
| Sensor type 3 | NPN/PNP transistor output without pull-up or pull-down resistor, mechanical contact (dry contact) |
| Measurement range (frequency) 3 | 0.1 Hz … 20 kHz |
| Pulse length 3 | ≥ 25 µs |
| Measurement span 3 (min.) | 100 Hz |
| Open-circuit voltage | 5 VDC |
| NPN residual voltage | ≤ 1.5 V |
| PNP switching voltage | ≥ 7.5 V (+ residual voltage UCE sat) |
Technical data - Output (analog)
| Output signal type | Current, Voltage |
| Output signal (voltage) | 0 … 5 V, 1 … 5 V, 0 … 10 V, 2 … 10 V |
| Output signal (current) | 0 … 10 mA, 2 … 10 mA, 0 … 20 mA, 4 … 20 mA |
| Load impedance (voltage output) | ≥ 2 kΩ |
| Load impedance (current output) | ≤ 600 Ω |
Technical data - Signal processing
| Conversion time | Peak-time measurement method (> 400 Hz): < 20 ms; Pulse time measurement method (< 400 Hz): < 200 μs + TCycle duration |
Technical data - Measurement error
| Transmission error (typ.) | ≤ 0.1 % of upper-range value |
| Temperature coefficient | ≤ 0.01 %/K |
Technical data - Power supply
| Power supply type | 24 VDC (SELV) |
| Nominal supply voltage U<sub>S</sub> | 24 VDC |
| Supply voltage range | ±30 % |
| Current consumption at nominal supply voltage | ≤ 50 mA |
Safety and protection
| Rated voltage | 300 V |
| Protection type | IP20 |
Safety and protection - Test voltage
| Test voltage (input/output/supply) | 2.5 kVAC; 50 Hz; 1 min |
Safety and protection - Insulation coordination
| Overvoltage category | II |
| Pollution degree | 2 |
| Insulation type (input/analog output/supply) | Functional insulation |
| Insulation type (adjacent devices) | Reinforced insulation (safe isolation) |
Connection data
| Connection technology | Push-in CAGE CLAMP® |
| Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
| Fine-stranded conductor | 0.34 … 2.5 mm² / 22 … 14 AWG |
| Strip length | 9 … 10 mm / 0.35 … 0.39 inches |
Physical data
| Width | 6 mm / 0.236 inches |
| Height | 94 mm / 3.701 inches |
| Depth from upper-edge of DIN-rail | 97.8 mm / 3.85 inches |
Mechanical data
| Mounting type | DIN-35 rail |
Material data
| Insulation material (main housing) | Polyamide (PA66) |
| Flammability class per UL94 | V0 |
| Fire load | 0.418 MJ |
| Weight | 27.2 g |
Environmental requirements
| Ambient temperature (operation) | -25 … +70 °C |
| Ambient temperature (storage) | -40 … +85 °C |
| Processing temperature | -25 … +50 °C |
| Temperature range of connection cable | ≥ (Tambient + 25 K) |
| Temperature range of the connection cable (UL) | 75 °C |
| Relative humidity | 5 … 95 % (no condensation permissible) |
| Operating altitude (max.) | 2000 m |
Standards and specifications
| Conformity marking | CE |
| EMC immunity to interference | EN 61000-6-2 |
| EMC emission of interference | EN 61000-6-3; EN 61000-6-4 |
| Standards/specifications | EN 61373, EN 61010-2-201 |
Commercial data
| Product Group | 6 (INTERFACE ELECTRONIC) |
| PU (SPU) | 1 pcs |
| Packaging type | bag |
| Country of origin | DE |
| GTIN | 4066966279931 |
| Customs tariff number | 85437090300 |
Product Classification
| UNSPSC | 41113630 |
| eCl@ss 10.0 | 27-21-01-28 |
| eCl@ss 9.0 | 27-21-01-28 |
| ETIM 9.0 | EC002918 |
| ETIM 10.0 | EC002918 |
| ECCN | NO US CLASSIFICATION |
Environmental Product Compliance
| CAS-No. | 1303-86-2, 1317-36-8, 7439-92-1, 79-94-7, 80-05-7 |
| REACH Candidate List Substance | 2,2',6,6'-tetrabromo-4,4'-isopropylidenediphenol, 4,4'-isopropylidenediphenol, Diboron trioxide, Lead, Lead monoxide |
| RoHS Compliance Status | Compliant,With Exemption |
| RoHS Exemption | 6(c), 7(a), 7(c)-I, 7(c)-II |
| SCIP notification number (Austria) | 6d73a011-84c6-4de8-9203-d6ba0a4a08c8 |
| SCIP notification number (Belgium) | 6cd3b3c9-9745-4390-aa1a-ac93ba1da332 |
| SCIP notification number (Bulgaria) | b01c1302-d9c2-438c-9217-730bfdfae0f7 |
| SCIP notification number (Czech Republic) | e8fd4d44-e267-4bd8-b97b-1fcb8247f4fd |
| SCIP notification number (Denmark) | 4da2ee18-6d67-44d0-9743-ad112597583e |
| SCIP notification number (Finland) | d0fa661d-f8f9-44c9-878c-daf953ee7c3a |
| SCIP notification number (France) | b6021de5-253c-45e8-9fd6-fea69eda5701 |
| SCIP notification number (Germany) | 07e3e21f-4fb2-4986-8866-7a14b9699500 |
| SCIP notification number (Hungary) | 0606f24e-06bf-4ebc-a260-31eab59b8e88 |
| SCIP notification number (Italy) | 6fc50000-c684-468e-973f-e70a3fb7bf3b |
| SCIP notification number (Netherlands) | 0de14568-55e9-47a7-877e-b1bb752ffa03 |
| SCIP notification number (Poland) | 37c59afc-3304-41ef-b57e-b4af0981cd37 |
| SCIP notification number (Romania) | b23ce25d-4008-47ae-b458-9cacfbfae760 |
| SCIP notification number (Sweden) | 721e6b08-10d7-4ada-96af-c2849dd874af |








